52 might be a bit too small for you at 5'10. Sure you can go for a longer stem but it would be better with the next size up which is 55. 52 is the most common size so finding a bigger frame might be a challenge. Where you from?
@@era82 On aliexpress, only 52 is the maximum size. I want tsunami SNM 4130. Do they exist more than 52? I have not seen this anywhere else. Thinking to buy an aluminum tsunami SNM 100. Size - L. I hope my hands don't break due to vibration. Thanks for answers. :)
Great build! I'm gonna build my first steel frame and this might just be it in getting my feet wet. I'm thinking of putting a 32c tire, do you think it would work?
You just need to make sure the fork can fit 32s. As for my frame, on paper, max tire clearance is 32 but I tried fitting 32 and it is snug. 30 or 28 would be recommended. Best of luck on your build
Search ka online ng pinaka gusto mong itchura ng magiging bike mo. Depende naman sa budget kung makukuha mo yung parts and kung kailangan mong kumuha ng alternative brand/part. Mapupuyat ka sa FB Marketplace and sa Shopee/Lazada :)
Yung spacers, sa shopee ko. lang din inorder. Seat post, chrome na talaga sya from start and 1k ata sya sa pagkakaalala ko. Yung stem is originally black. Manual filing and polishing since wala akong makitang -17. May riser bar din ako (not in video) na manual file and polish din.
Sa Kaypee Bikeshop. Sa Dragon St Marikina kaso pagkakaalam ko last na to. Actually meron din sa JRSpeed nung same drops, mas mura lang sa Kaypee ng konti. Check mo sa first vid ko.: ua-cam.com/video/IcNxB2cDfdY/v-deo.html pang 6min 11 sec ng vid.
nung time na binuo ko sya. limited yung polished parts. Yung seatclamp, stem, top cap, head seat and riser bar (after na nung video), lahat powder coat, di tumalab paint stripper so mano manong kikil at liha at metal polish.
Huling punta ko dun parang wala na. Ibang frame na yung nandun Pizz and Weapon. You can check sa FB page nila kaso baka sarado sila ngayon since Holy Week.
Araya AR-713. Yung mas flat sana yung hanap ko na Araya TX-733, kaso wala ako makita. Mas mukhang classic kasi flat and walang brakeline.. Salamat po sa panonood
Di naman ako nagkaproblema sa 110 in terms of line nya from crank to cog. Pero kung i redo ko yung build, 107 siguro. Para dikit pa yung crank sa frame ng maski konti. aesthetic siguro hahaha
Mga nasa 20k din inabot kasama na labor. Di kasi lahat ng parts galing sa kanila. Alam ko may summer sale sila hanggang March 31 so may discount. May magaganda na rin silang built bike na dun.
mataas na boss... 48 or 50 siguro. Pag 52 sadsad na yung saddle and mahaba na yung hahabulin sa reach maski pa iklian yung stem. RS and salamat sa support
@@johnharvietan5392 Ganyan din problema ko, halos ganito gusto kong build dati di natuloy kasi walang size 48-50 dito sa atin na snm 4130. Parang napanuod ko dati sa Upgradicitis sa youtube video ni Angelito binanggit yung size 48 ata. Balak ko kasi gayahin aesthetics ng Aventon Andreas for a cheap price eh pero bumili nalang ako Merida Speeder.
Kaya hanggang 32, pero katulad ng bike sa store sa video, sagad na yung 32 sa front and rear. Yung rear tatama gulong sa lagayan ng brake. Recommend ko lang is 28.
Limited ata large frame nila, di ko rin sure yung saang model sila merong malaki. Inquire kayo sa shop for specific details. JRSpeed sa FB and Shopee 😊
Salamat sir Around 20k din sir 6.5k sa frame 5.5k Ayara rims, XJ Hubs, Ragusa Spokes, assemble fee 1.5k Zoom Aero seatpost and generic saddle 2k MKS pedal (2nd hand FB marketplace), Christophe Toecage and Tioga Straps 1.5k VP crankset 130bcd 2k Pista drop, bartape, BB, Inner tube (kenda) Spacer Libre yung gulong - bigay ng tropa 840 sa assemble and grease Tapos may mga gastos pa after ng vid (Aside pa to sa amound dun sa taas 😂😭😂😭😂😭) Front break, Atomic Riser bar and Aeroic Grips (second hand FB)
Last I checked, these are also available in Ali Express. This one I bought from a local store. You can also buy this direct from their website: tsunamibicycle.com/
Kadalasan yung medyo malalaking bike shop nagbebenta ng tools If nasa Metro Manila ka, try mo sa Quiapo. Shopee and Lazada parin kung budget. Kung end naman and legit, pwede ka umorder sa Park Tools (although meron din nman sa Shopee and Lazada nun). Salamat sa panonood and support sir!
Almost 20 din. Overbudget since 1st build. 6.5 sa frame, 5.8 sa ws pa lang di pa kasama tires, 2 sa MKS pedal( kasama na cage and straps) 1 sa seatpost. The rest yung mga maliliit na bagay and mga ibang parts na hindi naman nagamit (in excess)
Eto pala yung breakdown 6.5k sa frame 5.5k Ayara rims, XJ Hubs, Sagmit Spokes, assemble fee 1.5k Zoom Aero seatpost and generic saddle 2k MKS pedal (2nd hand FB marketplace), Christophe Toecage and Tioga Straps 1.5k VP crankset 130bcd 2k Pista drop, bartape, BB, Inner tube (kenda) Spacer Libre yung gulong - bigay ng tropa 840 sa assemble and grease Tapos may mga gastos pa after ng vid (Aside pa to sa amound dun sa taas 😂😭😂😭😂😭) Front break, Atomic Riser bar and Aeroic Grips second hand FB) Salamat ulit sa panonood. Pa sub naman please :)
Pang threadless kasi na headset to sir. Yung quill pang threaded headset. May adaptor naman na mabibili kaso isa pa lang nakita ko and order overseas pa. Quillinator yung name
Almost 20k din. nakamenos kasi yung gulong galing lang din sa tropa. Stock na gulong ng built na roadbike. Nagpalit ng Continental kaya binigay na lang sakin yung stock. As for the breakdown, nasa ibang comments sa same vid. Salamat sa panonood and pa support na rin
May Shopee sila sir for parts: shopee.ph/jrspeed?smtt=0.0.9 Kung whole bike or frame, suggest message kayo sa FB nila: facebook.com/jrspeedphilippines/
Almost 20k for everything. 6.5k frame, 5.5k araya rims, flip flop xj hubs, ragusa spokes 1.5k zoom seatpost and generic saddle 2 k mks pedal, christophe cage and tioga straps 1.5k VP crankset 2k pista drop, bartape, bb, inner tube, stem, spacer Pair of tires are from a friend 😁 840 fee to assemble the whole thing
overbudget sir hahaha... almost 20 din lahat. 6.5k sa frame, 5.5k sa araya rims, flip flop xj hubs, sagmit spokes 1.5k zoom seatpost and generic saddle 2k mks pedal, christophe cage and tioga straps 1.5k VP crankset 2k pista drop, bartape, bb, inner tube, stem, spacer gulong libre galing tropa 😁 840 sa pag assemble ps: may gastos pa after ng vid na to. front break shopee, atomic na riserbar (ako na nagcut) and aeroic grips (second hand marketplace) 😂😭😂😭
68mm na BB... 110 yung length. Kung uulitin ko, papalit siguro ako ng 107 para mas malapit yung gap mula bb and crank. pag 103 naman, halos dikit na sa chainstay.
Almost 20k din sir... Nag isa isa pa akong hanap ng pyesa. Yung iba kasi di rin available sa shop. Salamat sa panonood sir. Pa sub na din kung okay lang. Salamat
This is 4130. For more clasic look, go for 4130. For modern, go for snm100. Disadvantage of SNM100 is the tire clearance which is only up to 25c compared to 4130 which is up to 32c
Nice nice nice , tnx sir sa tiwala, sa pgbuild ng bike mo, JRSPEED mechanicz at ur service.....
Salamat din sir!!! Simulan na project nyo pag video sa mga build mo para marami pa ako mapanood 😊
This frame looks classy as hell
Yun oh!!! Pag nakita ko to sa daan.. Bubusinahan 'ko,. RS pre. 👌
Ingat din sir.. Puro long ride ka pa naman 😘
Gusto ko din magbike, kaso ayaw ng katawan ko. 😁
@@charliemotoadventures Gusto ko ng Cafe Racer, kaso di kaya ng bulsa ko hahaha
.. Hahaha, alam ko classic ka din. Di ako magugulat pag nka caferacer ka na.
@@charliemotoadventures ayaw ni Sheila.. mukha daw ipis yung upuan. Mahihilot din yan 😂😂😂
Ang galing mo naman mag assemble lodz thank you for sharing your video
salamat tukayo 😁
Ganda potek, ganito balak kong build dati hindi natuloy haha
Ganda Ng bike mo sir.keep on vlogging po and stay safe.God bless po
Hey! Cool video. Can you please tell me if the size 52 frame will fit me? My height is 178 cm. I just can't find size 56 in stores. Thanks.
52 might be a bit too small for you at 5'10. Sure you can go for a longer stem but it would be better with the next size up which is 55. 52 is the most common size so finding a bigger frame might be a challenge. Where you from?
@@era82 I'm from Russia.
If your interested in getting one or their other models, you can try Ali Express or check their website: tsunamibicycle.com/
Hope this helps
@@era82 On aliexpress, only 52 is the maximum size. I want tsunami SNM 4130. Do they exist more than 52? I have not seen this anywhere else.
Thinking to buy an aluminum tsunami SNM 100. Size - L. I hope my hands don't break due to vibration.
Thanks for answers. :)
If your size is not being sold in AliEx... next best thing I thinkwkuld be going direct to Tsunami's website. Next size up would be 56.
Great build! I'm gonna build my first steel frame and this might just be it in getting my feet wet. I'm thinking of putting a 32c tire, do you think it would work?
You just need to make sure the fork can fit 32s. As for my frame, on paper, max tire clearance is 32 but I tried fitting 32 and it is snug. 30 or 28 would be recommended. Best of luck on your build
@@era82 I'll fit a 28 for now, and maybe try a 30 in future. Thanks man!
POGI🔥
salamat salamat :)
Chromoly po ba yang ganyang frame?
chromoly sir
Should I get the aluminum tsunami or the chromoly frame?
I will still prefer aluminum just to avoid developing rust in the future
Ganda ng set up nyo sir, plan ko rin mag fix bike newbie lang po. Any tips to recommend.
Search ka online ng pinaka gusto mong itchura ng magiging bike mo. Depende naman sa budget kung makukuha mo yung parts and kung kailangan mong kumuha ng alternative brand/part. Mapupuyat ka sa FB Marketplace and sa Shopee/Lazada :)
Ganda idol🔥🔥😍
salamat salamat idol.. salamat sa panonood and support ❤️
solid👌
Classic
Magaan po ba? Yung nagpalit ako dati ng fork to chromoly ang sarap sa pakiramdam what if kung frameset pa na chromo damn.
Ang comparison ko lang sa ngayon is yung roadbike ko. Mas magaan yung fixed gear ko and wala rin hirap pag paakyat na sa Marcos Highway
Woaaah, sana makaiskor din ako ng Drop Bar gaya sa 'yo. HAHA if iaa-out mo na. Baka nemeen hahaha
🔥🔥
Kailangan ko na magsipag. Mawawalan na tayo work 😂😂😂
galing!! ganda ng vid :))
nice setup 👌🏼
salamat sir :)
Nice build sir.. Linis..
Chromo po yang frame fork diba? ilang kg inabot?
Chromo sir... di ko nga pala na indicate yung weight: 9kg po
Nice build! HM sa chrome components? Sit post, stem, crank, spacers?
Got mine in green kaso all black components.. Gusto ko palitan ng chrome components for the classic look.
Yung spacers, sa shopee ko. lang din inorder. Seat post, chrome na talaga sya from start and 1k ata sya sa pagkakaalala ko. Yung stem is originally black. Manual filing and polishing since wala akong makitang -17. May riser bar din ako (not in video) na manual file and polish din.
ganda idol
san mo nascore pista drops?
Sa Kaypee Bikeshop. Sa Dragon St Marikina kaso pagkakaalam ko last na to. Actually meron din sa JRSpeed nung same drops, mas mura lang sa Kaypee ng konti.
Check mo sa first vid ko.:
ua-cam.com/video/IcNxB2cDfdY/v-deo.html
pang 6min 11 sec ng vid.
YOWN LUMABAS NA RIN!!!!!
kuya tanong kulang po pwede poba sa frame 4130 nayan na yung stem nya quill threaded yung vintage?
Hindi po pwede yung quill sa 4130. Wala kasi talaga syang thread para sa headset. Salamat sa panonood and pa sub nman please
@@era82 salamat po sa reply sige po!
kasi yung iba di nagrereply kahit pakiusap so salamat isub kita
I’m ride Tsunami snm4130 red. 🇲🇨 so cool
Btw, what headset?
The headset and seatclamp comes with the frame. Both were originally black but polished it. Same thing I did with the stem. Spacers are from Shopee 😂
@@era82 pag polish! paano niyo po ginawa?
nung time na binuo ko sya. limited yung polished parts. Yung seatclamp, stem, top cap, head seat and riser bar (after na nung video), lahat powder coat, di tumalab paint stripper so mano manong kikil at liha at metal polish.
Astig nyan lodi..
Nice set, Anong size ng rim niyan idol
700c sir
Ilan po na millimeter ang spacer bar na ginamit niyo?
Yung sa headset spacer, tatlong 10 mm na spacer
sir ano gamit nyong size sa bottom bracket?
Kenli 68mm english 110. Mas okay 107 sana. Hanap either Shimano or Tange square BB or yung outboard na type
@@era82 thank you po sir
may tsunami 4130 pa sila ngayon?
Huling punta ko dun parang wala na. Ibang frame na yung nandun Pizz and Weapon. You can check sa FB page nila kaso baka sarado sila ngayon since Holy Week.
Sir anong rim gamit mo dyan at size ng tire na nakakabit sa kanya?
Sorry nasa last part pala hehe nice build
Araya AR-713. Yung mas flat sana yung hanap ko na Araya TX-733, kaso wala ako makita. Mas mukhang classic kasi flat and walang brakeline.. Salamat po sa panonood
sakto po chainline sa 110 na bb?
Di naman ako nagkaproblema sa 110 in terms of line nya from crank to cog. Pero kung i redo ko yung build, 107 siguro. Para dikit pa yung crank sa frame ng maski konti. aesthetic siguro hahaha
Nice 👍🏻 magkano po nagastos lahat? Planning to build din sa jrspeed
Mga nasa 20k din inabot kasama na labor. Di kasi lahat ng parts galing sa kanila. Alam ko may summer sale sila hanggang March 31 so may discount. May magaganda na rin silang built bike na dun.
napaka gwapo mg bago mong alaga paps ❤
ganda..build new subs here brother
Magkano po total cost ng built na yan?
Lods san mo nabili arraya wheelset mo hm inabot
Sa JRSpeed din, lahat lahat kasama spokes hubs, cog, lockring and assembly, pagkakaalala ko mga 5.5k
Kung yung bare rims lang talaga, 1.8k isa sa memory ko
Pano mag tension nyan idol
boss how much inabot if ganyan wb ... tnx and please upload more
Almost 20k din. May breakdown ako ng cost sa mga previous comments
@@era82 thank you , sa response, reminds me of an njs keirin ,napaka ganda timeless
Yung talaga tinitingnan ko before pa ng build na to. Kaso isang NJS stamped part, mahal na agad kaya NJS inspired build na lang 😂
@@era82 ayun din ang trip ko sana watanabe kso ang mahal ... pero mas ok na sa akin tsunami pogi
Pwede po ba size 52 sa 5'2 feet na height?
mataas na boss... 48 or 50 siguro. Pag 52 sadsad na yung saddle and mahaba na yung hahabulin sa reach maski pa iklian yung stem. RS and salamat sa support
@@era82 di kasi ako makahanap size 50 na tsunami snm 4130
Sobrang limited yung ganung size. Most ng inoorder ng supplier puro kasi 52. Pwede ka mag try for the same geometry ng Celt or The Project Hi-Ten
@@johnharvietan5392 Ganyan din problema ko, halos ganito gusto kong build dati di natuloy kasi walang size 48-50 dito sa atin na snm 4130. Parang napanuod ko dati sa Upgradicitis sa youtube video ni Angelito binanggit yung size 48 ata. Balak ko kasi gayahin aesthetics ng Aventon Andreas for a cheap price eh pero bumili nalang ako Merida Speeder.
madalang lang maligaw yung ganyang size.. minsan isa or dalawa lang sa mga bike shop tapos mabibilindin agad. Salamat sa panonood and support 🙏🙏🙏
lods mag kano whole bike ng tsunami snm 4130 dyan sa jrspeed?
Sa mga nakikita ko sa post nila, aroung 21 to 22k yung whole bike na 4130
available pa po ba yan sir?
Ano po max tire clearance ng frame n to?. Ung sa likod na part
Kaya hanggang 32, pero katulad ng bike sa store sa video, sagad na yung 32 sa front and rear. Yung rear tatama gulong sa lagayan ng brake. Recommend ko lang is 28.
kasya po kaya ang VP hubs sa snm 4130?
Basta pang fixed na hubs maski anong brand pa walang problema.. basta alam mo lang ilang holes yung hubs and i-match mo lang sa rims.
salamat pala sa panonood.. pa sub naman idle 😂
Ano po toptube ng 4130 na size 52?
54 po yung length nya
sir meron ba silang large frame nyan?
Limited ata large frame nila, di ko rin sure yung saang model sila merong malaki. Inquire kayo sa shop for specific details. JRSpeed sa FB and Shopee 😊
standard po ba yang fork ng Tsunami SNM 4130
Standard threadless na fork sir
magkano lahat nagastos mo boss? including frame, parts etc. salamat at nice build
Salamat sir
Around 20k din sir
6.5k sa frame
5.5k Ayara rims, XJ Hubs, Ragusa Spokes, assemble fee
1.5k Zoom Aero seatpost and generic saddle
2k MKS pedal (2nd hand FB marketplace), Christophe Toecage and Tioga Straps
1.5k VP crankset 130bcd
2k Pista drop, bartape, BB, Inner tube (kenda) Spacer
Libre yung gulong - bigay ng tropa
840 sa assemble and grease
Tapos may mga gastos pa after ng vid (Aside pa to sa amound dun sa taas 😂😭😂😭😂😭)
Front break, Atomic Riser bar and Aeroic Grips (second hand FB)
@@era82 salamat boss! lakas maka vintage track bike feel yung sayo! ganda talaga!
boss ask lang kung anong size ng bb ng frame?
68mm English BSA. 110 yung haba nya. Good na yung 110 or 107 pag sa fixed gear. Salamat sa panonood and support
anu po brands ng headset lods?
Yung headset kasama na nung binili yung frame. Tapos niliha ko na lang para mag silver. Pasub please 😘
This Frame Tire Clearance Max ?
Max tire clearance for front and back is 700x 32. I recommend 30 or 28. Currently using 700x25
@@era82 ok boss noted 👍🏻
okay lang ba ang size sa frame is 52 ang height ko ay 5'4?
Pwede pa nman sa 5'4 kaso mag-aadjust ka na sa seat height. Sa stem okay pa 70 or 80mm na haba.
@@era82 thank you po
AliExpress frame?
Last I checked, these are also available in Ali Express. This one I bought from a local store. You can also buy this direct from their website: tsunamibicycle.com/
Mash Antipolo na this haha.
Itatry ko... parang kaya naman iakyat hahaha
@@era82 long skid pataas hahahahaha
Anong size po ng spacer? Standard po ba o os? Salamat
Tatlong 10mm yung sa spacer, sakto na. Walang putol tube. OS yung stem nya.
Any idea po gaano kabigat yung ganyang build?
kakaweigh in ko lang ulit.. 10kg
Ano pong size ng headset niyo?
1 and 1/8 po (34mm)
Magkano po buo nyo? Para may idea naman po newbie lang po
Anong height mo Sir? Planning to buy the same frame size 52. Height ko po is around 5'6". Thanks po.
5'7 sir. Di tayo nagkakalayo. May bago ata stock si JRSpeed ng Tsunami snm4130, Celt2021 tsaka. Tsunami SNM 100 2021
@@era82 Thanks Sir!
inantay ko to
Salamat sir!!!! ❤️
sir ano max tire clearance ng frame? 42c?
28 recommended.. 32 kaya pero sagad na sya
ua-cam.com/video/IcNxB2cDfdY/v-deo.html
Check mo 15:02 nung first vid ko.
nakalagay kasi sa site ng tsunami 42c max tire clearance hehe
@@legendarymigz1 kala ko rin yun nung una. Version 1 pala yun.Version 2 iba na yung fork.
version 2 ung 42c sir?
version 2 yung mas maliit na clearance
Magkano lahat gastos mo idol?
Saan po nakakabili tools ng bike
Kadalasan yung medyo malalaking bike shop nagbebenta ng tools If nasa Metro Manila ka, try mo sa Quiapo. Shopee and Lazada parin kung budget. Kung end naman and legit, pwede ka umorder sa Park Tools (although meron din nman sa Shopee and Lazada nun). Salamat sa panonood and support sir!
Ano bike shop mo boss
sa JRSpeed to sir. Sa Cubao. Harap ng Toyota Cubao
seatclamp size?
27.2 po size nung seatpost clamp
Anong stem yan boss
777 yung brand. 80 mm. Dating black yan, mano mano lang polish.
Hm po sa pizz frameset
Magkano bili mo sa rimset sir?
Pagkakaalala ko is 5.5k (rims, hubs, spokes). Plus 300 pa para iset up and ipa-true. Yung Maxxis na gulong bigay lang sakin.
Magkano Inabot lods ma tagal ako nag hintay sa vid mo lods
salamat sa supporta sir... inabot din halos 20 kasama na labor. inisa isa ko pa kasi yung parts
Sir magkano inabot lahat?
almost 20 din... may mga specific kasi na part na medyo mahal. wheelset na araya x xj hubs nasa 5800 then yung mks pedal + cage and strap na 2k na din
Buti namn ng labas na ng part 2
Salamat sa paghihintay sir. Salamat at natapos na din 😊
Magkano po labor sa pa build sir?
Sa shop, 800 labor then mga 40 yung miscellaneous.
@@era82 salamat sir! Nice bike btw
Total cost bro planning to build din ng ganyan
Almost 20 din. Overbudget since 1st build. 6.5 sa frame, 5.8 sa ws pa lang di pa kasama tires, 2 sa MKS pedal( kasama na cage and straps) 1 sa seatpost. The rest yung mga maliliit na bagay and mga ibang parts na hindi naman nagamit (in excess)
magkano boss inabot? sana manotice
Almost 20k... may breakdown ako ng price ng parts dun sa unang vid ko. Teka try ko ipaste dito
Eto pala yung breakdown
6.5k sa frame
5.5k Ayara rims, XJ Hubs, Sagmit Spokes, assemble fee
1.5k Zoom Aero seatpost and generic saddle
2k MKS pedal (2nd hand FB marketplace), Christophe Toecage and Tioga Straps
1.5k VP crankset 130bcd
2k Pista drop, bartape, BB, Inner tube (kenda) Spacer
Libre yung gulong - bigay ng tropa
840 sa assemble and grease
Tapos may mga gastos pa after ng vid (Aside pa to sa amound dun sa taas 😂😭😂😭😂😭)
Front break, Atomic Riser bar and Aeroic Grips second hand FB)
Salamat ulit sa panonood. Pa sub naman please :)
Magkano boss inabot lahat???
Almost 20k din... yung parts tulad ng bb, cage, straps and dropbar sa labas binili. eitjer other store or fb market. Salamat sa support ❤️❤️❤️
@@era82 lahat ba ng parts dyan pwede na ren ba pang matagalan/matibay???
Quality naman. After 1 year, chain pa lang yung pinapalitan ko. Good condition pa naman lahat
@@era82 pwede ba ilagay dyan yung quill stem???
Pang threadless kasi na headset to sir. Yung quill pang threaded headset. May adaptor naman na mabibili kaso isa pa lang nakita ko and order overseas pa. Quillinator yung name
Ano po size ng bb?
110 po. Pero recommend ko is 107.
Ask ko lang kung magkano yung bayad mo sa mekaniko?
Yung pagpapa assemble pagkakaalala ko is 800. Salamat sa panonood and support sir 🙏
magkano po inabot nyo?
Almost 20k din. nakamenos kasi yung gulong galing lang din sa tropa. Stock na gulong ng built na roadbike. Nagpalit ng Continental kaya binigay na lang sakin yung stock. As for the breakdown, nasa ibang comments sa same vid. Salamat sa panonood and pa support na rin
magkano nagastos mo boss
planning to buy kase eh
Almost 20k din... may breakdown ako somewhere sa comment section pero try kong update description ng vid.
Updated na yung description. Favor nman, pa sub hahahhaa salamat ❤️❤️❤️
Idol pwede mag order sa shop nila?
May Shopee sila sir for parts:
shopee.ph/jrspeed?smtt=0.0.9
Kung whole bike or frame, suggest message kayo sa FB nila: facebook.com/jrspeedphilippines/
Magkano po lahat nagastos nyo sir.... Salamat po
Medyo na over budget kaya natagalan. Inisa isa ko pa kasi yung parts. Almost 20 kasama na labor sa pag build sa shop.
@@era82 ow.. okay boss Salamats... Solid yung FXD mo ❣️
How much did it cost?
Almost 20k for everything.
6.5k frame,
5.5k araya rims,
flip flop xj hubs, ragusa spokes
1.5k zoom seatpost and generic saddle
2 k mks pedal, christophe cage and tioga straps
1.5k VP crankset
2k pista drop, bartape, bb, inner tube, stem, spacer
Pair of tires are from a friend 😁
840 fee to assemble the whole thing
@@era82 do a in-depth review please
Hm po ganyang build?
How much inbbot sir ?
overbudget sir hahaha... almost 20 din lahat.
6.5k sa frame,
5.5k sa araya rims, flip flop xj hubs, sagmit spokes
1.5k zoom seatpost and generic saddle
2k mks pedal, christophe cage and tioga straps
1.5k VP crankset
2k pista drop, bartape, bb, inner tube, stem, spacer
gulong libre galing tropa 😁
840 sa pag assemble
ps: may gastos pa after ng vid na to. front break shopee, atomic na riserbar (ako na nagcut) and aeroic grips (second hand marketplace) 😂😭😂😭
Hmm thankyou lods more vids and subscriber lods suggest ko sa mga vids mo maybe mag update ka ng mga fixie shops ung mga budget at high end fixie
Size po ng BB?
68mm na BB... 110 yung length. Kung uulitin ko, papalit siguro ako ng 107 para mas malapit yung gap mula bb and crank. pag 103 naman, halos dikit na sa chainstay.
magkano magpa-build?
Yung bayad mismo sa mechanic para magpabuild, at the time nung video 800 php. Salamat sa panonood 👌
Done
Salamat Ibyang ❤️
Specs po ng bike?
Tsunami 4130 size 52 including headset and seatclamp (for 27.2 clamp size)
Pista drops size 38
80 mm stem - 17 oversize clamping (fb market)
Generic 3 polished spacers 10mm each
Zoom Aero seatpost (27.2 size)
Generic brown saddle
VP crankset size 165 130bcd 48T
110 square taper bottom bracket
MKS pedal (second hand FB market)
Christophe single toe cage (not sure if small or medium)
Tioga Leather straps
Araya 32H Rims 700c
Ragusa Spokes
XJ Hubs
Unbranded lockring and 17T cog
KMC chains
Maxxis Dolomite 25
Kenda inner tube
Thanks for watching and small favor if you can sub please that would be much appreciated 🙏
magkano boss?
Almost 20k din sir. Salamat sa panonood at support ❤️
Hm nagastos mo Jan sir?
Almost 20k din sir... Nag isa isa pa akong hanap ng pyesa. Yung iba kasi di rin available sa shop. Salamat sa panonood sir. Pa sub na din kung okay lang. Salamat
Hm total cost?
Around 20k PHP. Able to save some since the tires was given by a good friend
Rs kitna hai
Tsunami snm 100 or 4130
This is 4130. For more clasic look, go for 4130. For modern, go for snm100. Disadvantage of SNM100 is the tire clearance which is only up to 25c compared to 4130 which is up to 32c
And small favor, if you can pleae sub.... Thanks thanks!
@@era82 but which one is lighter
Basing on the tubes used, 4130 is the lighter of the 2
excuse me, can you tell me BB size?
That is a 68mm x 110 mm english square taper bottom bracket. I'll recommend 68x107 so you wont have an alignment problem from your cog and chainring.
@@era82 thx for recommend bro !
magkano po bili niyo sir?
Part ko sya binili... Total? Almost 20k din kasama na dun labor ng pagpapa assemble
HM mag pa build idke
Kung yung labor lang ng pa build... total 840. 800 sa labor, 40 sa miscellaneous.
Lods ilang mm bottom bracket?
110 yan sir. Wala nman naging problema pero kung uulitin ko yung build mas maigi sa 107
Anong drop bar po yung ginamit?
Pista dropbar size 38. Oversize clamp
lods magkano lahat ng nagastos mo?