Oh man I have the same Skunk2 Megapower exhaust with SRS decat and recently got a stainless 4-2-1 header and it considerably changed the sound of it! More raspy near 5500rpm but still enjoyable..even more!
I will do once the car is complete as ive taken it off the road to work on it for next years show season. I'll post a new video or two when I have updates
Nice. How loud is it in person? Headers, test pipe and one of the loudest aftermarket exhaust systems out there? Surely, you must be setting off alarms or something!!!
In person it's nuts now as it now has a Spoon 4-2-1 header. I have set off a couple alarms before in a carpark haha. Though its a bit too loud for a daily now, so have to drive it with the bung in for daily use
Dead Memoriez depending on the design you should be fine. 99% of all flanges found on the 2.25" pipes are the same size flanges used for 2.5" and up to 3" again depending on brand
gibbscp Ok cool. The Euro models and Canadian and different from The USA models. Is is a SOHC or DOHC? You should make another video on the new look...... would be cool.
Same engine and Spec as the US SI just with a smaller rear spoiler. Though ive got a big as one now lol. Yeah been meaning to make a new video for quite a while now. Just need to find time and a day with good weather
I can't believe there's a dislike for this video.
Oh man I have the same Skunk2 Megapower exhaust with SRS decat and recently got a stainless 4-2-1 header and it considerably changed the sound of it! More raspy near 5500rpm but still enjoyable..even more!
sounds like...STREETRACE
Cheers, i need to get a new video made. She looks quite different now too
okay this thing is sick! its high pitch kinda like a gt3 lol. I prefer the high pitch to the deep growl.
It still had the standard OEM EM1 4-2-1 header which has now been replaced with a Spoon 4-2-1 manifold.
there are a cayman here and im only see an EM1.
honda all day.
I will do once the car is complete as ive taken it off the road to work on it for next years show season. I'll post a new video or two when I have updates
Porsche on the right
sick!
What are the part or model numbers for the 2 things installed?
Very nice
Do you have a cat ? Or did you take it off ?
I took off the OEM cat and replaced it with a Megan Racing Decat/test pipe. Hope this helps
Is that a megan racing header+decat under pipe? Or megan racing catless decat?
Megan racing decat, she has a Spoon 421 exhaust manifold
Nice. How loud is it in person? Headers, test pipe and one of the loudest aftermarket exhaust systems out there? Surely, you must be setting off alarms or something!!!
In person it's nuts now as it now has a Spoon 4-2-1 header. I have set off a couple alarms before in a carpark haha.
Though its a bit too loud for a daily now, so have to drive it with the bung in for daily use
I've set off a couple of alarms yeah, but i have a proxcimity alarm too, so not many people park next to her lol
I've set off a couple of alarms yeah, but i have a proxcimity alarm too, so not many people park next to her lol
I've set off a couple of alarms yeah, but i have a proxcimity alarm too, so not many people park next to her lol
Have you ever thought about getting a Buddy Club Spec 2? Loudest exhaust system out there lol. Your neighbors would probably hate you if you had it.
What’s the wheels on those
Make a new video with the header.
Wheels?
what year civic
I have the same civic. It’s either a 1999 or a 2000 civic SI. Aka civic EM1
I have a 1999
do you havve this setup??@@Hassan-yz6yr
Nope just stock header, Megan Racing decat (test pipe) and the bung taken out of the can.
Does the skunk 2 megapower r have a fat back box like 4.5 inches wide lmm
Yeah it's a large can thats on the end of this, either 4.5 or 5", cant remember the exact size but it's not small thats for sure!
I wanted to put it on my 2.25 test pipe but i no the megapower r is 2.75 and would i need a adapter or what ?
Dead Memoriez It will fit fine as the part that joins the test pipe has wider/extended holes to allow for smaller test pipes to be lined up perfectly
Well I just ordered a 2.5 catback will that fit right up to my stock cat ? With no modification
Dead Memoriez depending on the design you should be fine. 99% of all flanges found on the 2.25" pipes are the same size flanges used for 2.5" and up to 3" again depending on brand
Looks like a ex not an si.
standard VTi (UK EM1).
Looks more like a track car than a street car now
gibbscp
Ok cool. The Euro models and Canadian and different from The USA models. Is is a SOHC or DOHC? You should make another video on the new look...... would be cool.
Same engine and Spec as the US SI just with a smaller rear spoiler. Though ive got a big as one now lol. Yeah been meaning to make a new video for quite a while now. Just need to find time and a day with good weather