The cheaper the suggestion the better. Need photos to sell her.

Поділитися
Вставка
  • Опубліковано 3 лют 2025

КОМЕНТАРІ • 8

  • @robertpolley554
    @robertpolley554 4 місяці тому +2

    Block ice would be ideal but bags will work , stack and then let it melt.

  • @davek6630
    @davek6630 4 місяці тому

    Move trailer forward, but leave half the container over the trailer. Lower the bank of container and rest it on the rear of the trailer deck. Slid the container back with the mini, until the back of container is on the ground. Then drive forward really fast, like lumber delivery guys do! lol. But seriously, Jack it down on the front end like you’re doing. If you’re setting it on blocks or railroad ties, place some midway on the ground and finish lowering. The back will titer upwards off the ground as the front is lowered.

  • @eragon2262
    @eragon2262 4 місяці тому +1

    Pull out the trailer, do the same thing you have on the outside but lower and right under the edges so you can jack it down. alternate lowering it then repeat.might have to dig a few holes to get it low enough

  • @davidswindle4278
    @davidswindle4278 4 місяці тому

    Back fill underneath the beams and drag it down!

  • @jthewarrior5354
    @jthewarrior5354 4 місяці тому

    Need to call a crane company

    • @JDSOutdoors
      @JDSOutdoors  4 місяці тому

      @@jthewarrior5354 to much money

  • @ashleywynn4923
    @ashleywynn4923 4 місяці тому

    Keep notching log down. Pull trailer out. Lower jack till beams rest on the top of log all 4. Then notch log further down to max lift of bottle jacks then repeat. Take some time but its cheaper than a crane or other big equipment. Poor boy way of thinking.

  • @sampletaster5093
    @sampletaster5093 4 місяці тому

    Piece of cake. Just some pipes and roll it off. Done it many times.