I cannot tell you how much I appreciate everything you have done as far as providing information and parts for these machines they are cheap they are great for what they do and they’re a pain in the ass to get any info on my hat is off to you sir I will continue to order all my parts through you specifically
Literally am here for quick connection i have calipers. Are you seriously not selling them anymore? I purchased a bit of an upgrade from the base units but love the quuck connection idea
big move and I hope it works out, there is a market for simplification of maintaining and improving the hydraulic systems on these. I just finished my mods and the hardest part was the quick connect adaptation for 3/8 ISO A flat face. (which is what I figured was the best QC fitting to use). you should consider some pre-cut mounts for fan mounts that people can self-weld for installation. good luck, I requested some knowledge in the channel but that didn't happen.
You’re spot on about the flat face being the best to use, although I prefer 1/4” body. Fan mounts for the machines are usually not needed because they can simply attach to the body panels.
This an awesome resource now! Thank you. I own an AGT L12 I would like to install an hydraulic oil filter can you help with that? Also are you going to produce a cushion valve video?
I think I need/want an 18mm Din light 90deg female to go to my hydraulic tank main return. 1. What size hose barb is on this fitting? 2. How much to make a hose with 18mm-90 deg to an8 male at 18" length? TKS
you should double check the measurement of the thread OD. it should be a 15mm din light on the tank return for AGT 15 and I didn't use a barb fitting on mine, I used a gates compatible crimp fitting for 5/8 hose
After watching your video on fitting sizes 3 more times, I may have been describing the sizes wrong...so let me try again. DIN-L, 15mm tube size, 22mm threaded fitting, 27mm wrench size, 1/2" hose size, female 90deg hose end. Do you have these fittings?
5/8 hose is ok --- as long as it screws onto a male DIN-L fitting with 22mm threads and 27mm wrench and has an AN-8 male fitting at the other end, all will be OK. Fatter hose is not a problem, fittings that connect and overall length are the important issues. 5/8" hose sounds like it would be better with less restriction/flow velocity.
Ok where you located. We had a tractor company to bust our housing on drive motor. Of course they charged us $375.00 yes . To replace the seal that blowed Got home still leaked I had raise t mortal heck get money back. To take to a honest hydraulic place. They found the Ediots left old seal and busted the housing trying to put a homemade seal in. So please help us find a drive motor For Roda 2023 skid steer
Cam - This is great to hear. I've made 4 purchases from you and every one fit great and worked great. Thanks for sorting all this out for us. @diggerdavesea
Great to know there's a mini excavator Guru, when everyone else looks like us like we're nuts. Thanks.
Thanks. Hope your business takes off huge.
I cannot tell you how much I appreciate everything you have done as far as providing information and parts for these machines they are cheap they are great for what they do and they’re a pain in the ass to get any info on my hat is off to you sir I will continue to order all my parts through you specifically
Right on! You guys went all out with the fittings 👍 Definitely will order from you when I need some hoses!
You are a fantastic resource for information and parts, thank you for that Cam.
Thank God you exist! This is a man who's been thru the mud with these things. We will be hitting you up, unless my boss already has!
Literally am here for quick connection i have calipers. Are you seriously not selling them anymore? I purchased a bit of an upgrade from the base units but love the quuck connection idea
big move and I hope it works out, there is a market for simplification of maintaining and improving the hydraulic systems on these. I just finished my mods and the hardest part was the quick connect adaptation for 3/8 ISO A flat face. (which is what I figured was the best QC fitting to use). you should consider some pre-cut mounts for fan mounts that people can self-weld for installation. good luck, I requested some knowledge in the channel but that didn't happen.
You’re spot on about the flat face being the best to use, although I prefer 1/4” body. Fan mounts for the machines are usually not needed because they can simply attach to the body panels.
I have a QH 12 and need several things so will be checking out your website, but do you have a 6mm male to 8mm male hydraulic line adapter?
Are you going to be selling the foot pedal kits and hydraulic cylinders for the thumbs?
This an awesome resource now! Thank you. I own an AGT L12 I would like to install an hydraulic oil filter can you help with that? Also are you going to produce a cushion valve video?
Do you ship to Canada if need be?
What is the website?
Great idea.
I need everything to hook up my hydraulic filter, I have the housing and filter already but need everything else for my qh12.
Just bought the pump protector kit
Where in fl are you located I need quick connects
Largo
I think I need/want an 18mm Din light 90deg female to go to my hydraulic tank main return. 1. What size hose barb is on this fitting? 2. How much to make a hose with 18mm-90 deg to an8 male at 18" length? TKS
What model machine?
you should double check the measurement of the thread OD. it should be a 15mm din light on the tank return for AGT 15 and I didn't use a barb fitting on mine, I used a gates compatible crimp fitting for 5/8 hose
After watching your video on fitting sizes 3 more times, I may have been describing the sizes wrong...so let me try again. DIN-L, 15mm tube size, 22mm threaded fitting, 27mm wrench size, 1/2" hose size, female 90deg hose end. Do you have these fittings?
@@johnrussell6620 we do not stock any 1/2” hose fittings for 15L. 15L fittings are exclusively used with 5/8 hose
5/8 hose is ok --- as long as it screws onto a male DIN-L fitting with 22mm threads and 27mm wrench and has an AN-8 male fitting at the other end, all will be OK. Fatter hose is not a problem, fittings that connect and overall length are the important issues. 5/8" hose sounds like it would be better with less restriction/flow velocity.
Awesome
You need a bigger shop.
Yes I do
Ok where you located. We had a tractor company to bust our housing on drive motor. Of course they charged us $375.00 yes . To replace the seal that blowed
Got home still leaked I had raise t mortal heck get money back. To take to a honest hydraulic place. They found the Ediots left old seal and busted the housing trying to put a homemade seal in.
So please help us find a drive motor
For Roda 2023 skid steer
Cam - This is great to hear. I've made 4 purchases from you and every one fit great and worked great. Thanks for sorting all this out for us. @diggerdavesea