Nice simple video ,but once adjusted how do i know if the flow from the pump to the carb is enough?I have a Derbi GPR50 that has seized twice and i suspect the oil pump is not pushing out enough,when running (on premix) i hold the pump fully open but barely anything comes out i can't beleive it has enough umph to get up to the carb.
Make sure both 2 lines on the right are below the left single line if you are using tuning exhaust or aftermarket cylinder kit, otherwise it will sieze after a while
Yeah I have a question I have a 2001 Runner 49cc and I changed the exhaust. Now it revs higher and on higher rpm's the oil light turns on, any ideas in how to fix the problem?
Hi. My Gilera Runner 180cc old model do not know exactly between 97-02. firing pin becomes pitch black once it starts then it will not go well, when it dies, would not start again until you changed the spark plugs then the same thing happens as soon as you started. I think it is because of the oil. This is where you show the right approach and fix the problem, or, replace the entire oil pump. Tips thanks
hi i have a piaggio x9 500cc 2003 and ive been told my oil pump as failed is it easy to fix and would i need any spacial tools from what ive been told its a plastic toothed wheel with like a hub on it
Hello, the 2 lines are like this from the factory ( - - ) ? I have a bigger engine kit ( 49mm piston) , should I get the pump to carry more oil to the carburator ? tnx
+jhax78 Not even close to reality what you say.I have my scooter running with a 48mm kit for 4 years now with the stock oil pump and the two lines aligned.Not a single problem has occured so far...
Hi can you help I have just rebuilt my 50cc typhoon with a new 70cc kit and crank carb performance exhaust etc... she is running sweet but every now and then the oil light flickers on and off do you have any ideas??? Please
yo, you helped my life xD
Nice simple video ,but once adjusted how do i know if the flow from the pump to the carb is enough?I have a Derbi GPR50 that has seized twice and i suspect the oil pump is not pushing out enough,when running (on premix) i hold the pump fully open but barely anything comes out i can't beleive it has enough umph to get up to the carb.
Thanks! good job
Make sure both 2 lines on the right are below the left single line if you are using tuning exhaust or aftermarket cylinder kit, otherwise it will sieze after a while
This should work perfectly fine. I also thought about doing this.
Like ur video about filter and transmission service. I would like to find where is the oil changing location on the gilera runner 2000 180sp scooter
Thank you
Hi thks four your video I have a Piaggio Zip 50 2T when is cold is smoke a little I don't know if is normal or to much oil wo to calibrate thank you
Thanks!
Nice
It may be an option to change the size of your sprinkler ?
Yeah I have a question
I have a 2001 Runner 49cc and I changed the exhaust. Now it revs higher and on higher rpm's the oil light turns on, any ideas in how to fix the problem?
what if u eliminate it and use premix gas instead?? i removed the gear that turns the oil pump. does it affect the engine??
Hi. My Gilera Runner 180cc old model do not know exactly between 97-02. firing pin becomes pitch black once it starts then it will not go well, when it dies, would not start again until you changed the spark plugs then the same thing happens as soon as you started. I think it is because of the oil. This is where you show the right approach and fix the problem, or, replace the entire oil pump. Tips thanks
hi i have a piaggio x9 500cc 2003 and ive been told my oil pump as failed is it easy to fix and would i need any spacial tools from what ive been told its a plastic toothed wheel with like a hub on it
Hello. I have a gilera runner 50cc 2004 but i have a problem with the fuel or somenthing. Do not acelerate. Can you help me ?
What do you mean by ”in right” like which thing
Full throttle or idle?
Hi just wondering if u could help me my son as a gilera runner 70cc 2 stroke. How do I test oil pump is working pls ?
Howe can i change te whater pump
Witam a czy jest jakas norma ile ma sie otwierac
hey my scooter isnt sucking it in the engine anymore do you know a fix?
Can anyone tell me is this the same for a 2004 gilera stalker
I have a gilira DNA and somting is missing vrom te electronic ut supoostoe bae onderneed te seed
Hello, the 2 lines are like this from the factory ( - - ) ? I have a bigger engine kit ( 49mm piston) , should I get the pump to carry more oil to the carburator ? tnx
i wouldn't even use the pump with a 49MM kit but instead mix it myself it's not going to get enough oil if you leave it standard
tnx bro
+jhax78 Not even close to reality what you say.I have my scooter running with a 48mm kit for 4 years now with the stock oil pump and the two lines aligned.Not a single problem has occured so far...
Leonidas Mavrommatis what king of scooter is yours??
Hi can you help
I have just rebuilt my 50cc typhoon with a new 70cc kit and crank carb performance exhaust etc...
she is running sweet but every now and then the oil light flickers on and off do you have any ideas??? Please
Focus Gaz blay yeh means you need oil 😂
The lines should NOT be aligned, with piaggio stock pumps the right one should be 3mm beneath the left one
Source?
Hello bro,if i install 70cc kit,how much I need to increase the oil supply?
I just put a cap of oil in with fuel and left it on standard settings seems to be fine
Premix 1000%better for fast scooters.
My piaggio fly 2 stroke is using too much oil i bet the line is off by at least a few centimeters 😂