DIY Cable to Hydraulic Conversion on 88-91 Honda CRX CIVIC EF Wagon Sedan Hatchback
Вставка
- Опубліковано 3 жов 2024
- Find the shifter here! Use code GarageBuiltHondas and save 10% off of your purchase.
jackspaniaraci...
Clutch Line - amzn.to/3OFyAfI
Reservoir - amzn.to/3OLSGFb
Brake Fluid Specific Tubing - www.pegasusaut...
CMC and Slave bought from Autozone
My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFFT
Decals available for purchase here - garagebuilthon...
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas."
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!
If interested in the bracket, contact Isaac at the link here. He's making a batch of 10 and 3 spots are already filled.
instagram.com/1tealrex?igshid=YmMyMTA2M2Y=
Hi there loving your videos,I was wondering if you could advise me on what driveshafts I would need for my 1990 ef hatchback, I am have fitted a b16a2 vtec engine but am experiencing a lot of vibration with the ek4 shaft I have fitted, any help would be appreciated.
Many thanks Neil.
Depends on your intermediate shaft. Either DA or DC Integra usually. Unless yours is using the original part then I'm unsure which axles to use with those for the driver side.
Cómo puedo conseguir la pieza esa del clutch
Awesome! This conversion really saves on the pedal assemblies. I had like 3 EF/CRX assemblies break with the cable/hydro bracket.
Thanks for that info. This feels good so far. Excited to get some feedback from the racetrack.
Been looking for an alternative now that hush doesnt offer their kit anymore. Great video!
That’s funny this pops when I’m finishing my ef build and I’m currently trying to get the innovative kit setup.
Oh wow! Trevor is forever saying I should hydro-covert my EF!
Still enjoy watching all the Pioneers in the Honda game throwing up content wish we could have heard a little VTEC at the end definitely good content though
Looks like a nice piece. I installed the Hush Performance full hydro conversion on my 1989 CRX. Used to be a manual.
👍
I remember watching Youngstatic make his own bracket. I was going to attempt it but found out about the vent delete. I gotta have my AC. 😂
You'll still have AC. It just won't supply the far side over there. The center and right vents will get all of the airflow and shouldn't be any issue for an AC equipped ac.
Always enjoy watching all of your uploads. Good camera work.
Looks like a solid conversion. I wish there was an easy way to keep all the vents and bolt in a hydraulic conversion.
Agreed man. Something extensive with fab work done to the clutch pedal may work. Would be cool to see.
Finally able to watch the who video! Lol. Glad you got the conversion done. Worth the reliability to get rid of those vents.
Really looking forward to seeing the process you do on the dash! I haven't flocked because of the exact issues you mentioned. Can't clean em which makes it a rough option.
Thanks buddy! Hope to start working on it soon!
Great job again!!!! Thanks to share us. Regards from France
Yes you did it! I've been running my hydro converted pedal assembly for almost a year now and my D series hydro trans shifts a lot easier since going full hydro. But I've found that the EF clutch pedal just doesn't have the right throw, so the leverage is never quite right. My plan is to fabricate the firewall of my EF to fit an EG clutch pedal assembly. Seems easy enough to do, but I'll have to delete the brake booster, luckily they sell brake booster plate for $50 on ebay! Hoping I get it done soon!
Awesome!
Mine seems great, the CMC piston is pushed in all the way and I had great feel even with a little heavier 1.5 Competition Clutch.
Killer Job Dude great video Jon. Keep up the good work
I have a yellow 1989 Honda crx si! Mid 90’s we pulled out stock si power plant swapped black cover ZC DOHC and now, I reinstalled stock si power plant @ 3,000 rpm bogged out
Haha perfect timing. I just mocked up a bracket for a new setup! Need to find a OEM master to finish it up though
I'm using an AutoZone CMC.
@@GarageBuiltHondas i might go that route as well.
you can buy the correct length clutch hose from rywire if needed
👍
There is plenty of videos on how to restore/rewrap a dash and it will come out much better.
It's a track car. Not wanting to restore it. Just want it functional and a little better looking.
I’m half way through the video right now. I wanted to ask before I forget. But does your buddy have more of those brackets for sale? I’m super interested
You can contact him on Instagram. @1tealrex
Thank you very much!!
Finally!!!!
Yup. The stars aligned.
I did this with ek master and slave with - 4 hose, only a HD clutch or stage 2 as you Americans call it and the pedal is so extremely hard it's impossible to push in
Mine is stiffer than what the setup is intended for but not difficult by any means.
I’m having a lot of trouble getting the slave to return , it extends so far that my clutch never meets the flywheeel, I’ve adjusted the pedal up and down and can’t seam to get it to let the clutch down
Makes me wonder how LHT did his?
Oh. On another note. If you haven't yet. Since it's a track car. And if you haven't done it yet. You should try to delete your steering column lock. For safety purposes.
Me too. Maybe use a Hush kit of something similar?
That's a good idea. I wanted the JDI push start anyway and it does that so that'd be cool.
@@GarageBuiltHondas not exactly sure how LHT did it. In his recent series, the crx he was working on, he put a hydraulic clutch in it. But he never did say what he used for the pedal assembly. But he probably has a write up somewhere.
And the jdi setup sounds nice. But I've heard mixed reviews. Something with the boards shorting out and stuff. But their main relay replacement, now that's something worth buying
I had the JDI in my EK and didn't have an issue with it. I'd still give them a shot. I do want that relay setup though.
What throttle cable are you using ,mine is to short one way and to long another ,it will bind when full throttle and cause stuck acceleration ☠️
88-91 Civic/CRX Si on a B swap.
Did you have issues bleeding the clutch
Hydro clutches are a little weird already but no, it went smoothly on this setup.
Is the eg cmc is bigger them em1 ???
I did this on my ef with a em1 cmc i cant put it on gears while is running
New clutch new trans i bleed that cmc but no luck
It might be since it was a B series engine in the EM1.
The feel of the hasport one that bad??
Not at all. I have a heavier 1.5 Competitive Clutch. I think it kept stretching the cable and wouldn't allow the car to go into gear smoothly and I hated grinding this S80 R trans.
Bro, Ive been researching this lately. Just picked up an ef. Is your guy willing to sell the bracket? Will buy one asap
I left his IG link as the pinned comment.
@@GarageBuiltHondas Thanks. I message him. Appreciate it
How do you mount the slave onto the trans itself?
All Honda B series slaves are mounted using 2 bolts.
Been reading comments so is this bad to use if you have a “ more then stock “ clutch? Or is that other conversions
I haven't read these "comments" you're talking about. As long as a hydro setup is braced properly there shouldn't be any issue with heavier clutches as the CMC is still able to push the fluid with no movement in the CMC.
@@GarageBuiltHondas okay awesome that what I was logically thinking I read somthing Seth said somthing bout it maybe I didn’t read it properly
will that b series cable kit fit on a k24?
What cable kit?
Dumb question but did you swap the trans to a hydro Trans? Or is this just to kinda replace the cable? So confused
ua-cam.com/video/NHO57tBjZkw/v-deo.html
You said you got the slave cylinder from autozone ? What year/model is it off of ?
You'll buy the one needed for whichever transmission you're using.
@@GarageBuiltHondas it's an s80 , I got it from hmotor I think it's civic type r trans it has jfd stamped on it I believe
All hydro b are interchangeable
@@GarageBuiltHondas thank you for replying, love your cars and videos there very helpful
👍
@17.17 what shifter is this?
and what cable using for?
ua-cam.com/video/I2r1DJOlcfg/v-deo.html
Cable?
Any chance you have an ac compressor for a 91ef ?
I don't. You're better off buying a brand new one. I wouldn't trust an old one.
how is the pedal feel? I have the original hush kit that mounts to the U part of the clutch pedal and it has some slop and is super stiff with a stage 3 action clutch. the new one im making is super similar to that bracket.
I have a Competition Clutch 1.5 which is heavier and I think what was causing the cable to stretch. The pedal feel is awesome, feels like I'm driving an EG/DC now with how easily it engaged the clutch.
@@GarageBuiltHondas awesome!!
what would i look for when trying to buy the cmc and slave from autozone,can i get a parts number,i have a 89 ef sedan that im trying to convert to hydro and having trouble finding parts and u please help🙏
Which conversion bracket are you using?
i dont have that yet either,im trying to use the link u posted from the guy that fabricates them
Are you on Instagram?
yea i sent him a message yesterday
if i were to get that bracket what would the part numbers be on the cmc and slave
Yo nomas gaste $50😂
🔥🔥🔥🔥😇😉🍻🍺