Welding a flat roof ensuring it is watertight | High Tech Membrane Roofing | Essex Kent London

Welding a flat roof ensuring it is watertight | High Tech Membrane Roofing | Essex Kent London
www.hightechmem...
Here is a member of our roof installation team welding a flat roof to ensure it is watertight and storm proof.
At High-Tech Membrane Roofing we only use the best materials - this enables us to offer a LIFETIME GUARANTEE.
So if you need a new flat roof then call us at High Tech Membrane Roofing. Covering Essex, Kent and London

[@advancedue476]

Love seeing the comments full or roofers 🤟🇲🇽🇺🇲

[@paullindsay4798]

Went on the course for this but after doing 2 roof fast learned that your on your knees all day mine were killing. I jacked it and went to the glue down stuff or back to GPR

[@gmdgmd952]

Turn your heatgun down a bit and take your time on the corner and covering buttstraps and your not pre welding anything you’re looking for at least 50 to 60 mm weld

[@anthonymartin7229]

Buttstrap goes under your drip not just welded to the face. Lack of corner detail to raggle. Upstart should be barred down with field sheet then coverstrip. Good effort for your first attempt thankfully not my roof 😂

[@mirbaum]

👍

[@michaelberry1793]

Lovely bubbly

[@jonnydanger7181]

Field sheet must be wrapped 4” down over the edge with the sheet metal flashing installed over field sheet to assure attachment. Sheet metal flange then stripped in with 8” wide heat weld strip.
This work must be stripped off and reworked.

[@beauthornton793]

We’re the roofers, we know how it goes. Mind your own business.

[@scottpaterson9821]

Yeeeha

[@PeakyBlinder]

Agreed, this is a poor instal,
Please don't follow this,
SPRA would love to see this,

[@Crazyman1212]

Your welding a little too quick, especially your pre welds. Turn that your welder down to 7 and go half your current speed.

[@advancedue476]

Fr had it on a 10 right there at the end for sure

[@advancedue476]

Is it a pvc? Saw the bleed out on the last weld but it also seemed like his gun was on 10😂

[@arunkumarsarunkumars209]

This sheet uae ware Available...?

[@premkumarkumar2397]

Masin ki kimat kya h

[@MrFlatroofer]

I have just replaced a single ply roof,15 years old. The product itself was good, but the decking underneath had rotted and not safe to work on and there was 2 cuts on the upstand.

[@jonnydanger7181]

Sounds like a condensation issue. Did you add insulation?

[@MrFlatroofer]

@@jonnydanger7181 I added insulation ,but the contractor laying the single ply did not.

[@jonnydanger7181]

@@MrFlatroofer good job sir 👍

[@KaayCR6]

Thats an awful lot of bleed out

[@jarrettsmith1757]

But strap wasnt straight

[@Покрівлягідроізоляція]

not a bad job

[@wesjones7215]

Clean your gun all your welds are full of carbon

[@mattspacie7141]

No edge protection Think they need to retrain welding

[@davidowen1074]

That stuff is crap