Not a fan of the movie Devastator, but what this company did to bring him to life is just impressive, much respect for the designers that made it happen :D
Half the robots modes are atrocious, but props to the company for doing a great job in working with the designs and props to you for your patience. Love it.
10:43 Scrapper is not a 992G. In the movie, it's more of a 992C or 992D front loader due to its z-bar linkage design at the front. The 992G has a single bucket cylinder but not Z bar linkage.
RUby productions soy ultra Sonic movie saludando y gracias por el vídeo yo también tengo mis propios constructicons y creo que está bien que cada uno tenga lo suyo no
One day I'm going to get to this level with my stop-motion! One thing I need to work on is making my videos longer. This is definitely very well done & I love these versions of the Bayformer Constructions. Even though these aren't officially licensed figures, I find the overall aesthetic to be superior to the official Studio Series versions.
Great effort on the vid (yes I am a bit late to the party lol) for the most part the stop motion is excellent (and a lot better then what I could do) though some points I noticed to hopefully make your next content even better: When you had the names of the transformers in the bottom left, it was hard to read sometimes because of white text on a white background - maybe add a red border to the text (to go in line with the whole Ruby Production theme) In this video in particular, where a figure has more than two forms, a lot of the transformation sequences where left out, I know when I get a new figure for my collection I cant work out, ill often look to vids like this to help me - so adding in sequences for all forms would be cool As mentioned for the vast majority of the actual stop motion is fantastically smooth, there were just some bits that seemed more choppy than others (I know things like unattached hooks cant be as smoothly done as folding panels etc) but there were some bits that might of needed a few extra frames just to smooth things out. And lastly: some of the cuts to different angles where a bit jarring for the tempo/flow of the video, maybe add a cut effect? as I said, I found the effort put into this video to be amazing and I am not looking to putting you down but just some friendly (and maybe unwanted) advice for going forward? Anyway keep up the great content
I am genuinely proud that you have Scrapper and used confirmed things to help you, Scrapmetal’s Studio Series Toy Bios confirmed that the Shovel was Scrapmetal, also, Buckethead was a working for shovel, even, Paramount doesn’t do Buckethead.
Buckethead was his own guy, if you look at the transformation scene scrapper becomes the right arm and another bulldozer becomes the left had that hand is presumed bulldog. But it could also be skipjack and the as figure is just wrong, it would explain long haul and overload being the same size and being legs
No dude, seriously, according to the Transformers size chart, Devastator was made up of 8, and Scrapmetal is the Bulldozer, and the TFWiki has no info of Buckethead in Revenge of the Fallen. And learn how to respect people’s opinions.
after seeing through this monster, i see it just the oversize of Legend Scale Devastator from ROTF, with more detail and more complex transformation, still looking good
The old Devastator Gen1 (the green and purple one) looks much like a Transformer compared to this one that looks like a big bug. But I admit that this one is much more detailed.
Nunca me ha gustado la estética de los Bayformers, pero los diseñadores que hicieron que esta locura funcionara en un juguete del mundo real son magos absolutos.
I have a dream if buying this whole set one day! Sadly it'll be very difficult to find then since I cannot find one even now. But maybe someday.. maybe
The fact i thought I had a playlist going is crazy to me I was just watching and jamming out 19 just to see how the rarest thing from my childhood looks fully combined together
There was only 8 that combined, long haul, overload, skipjack, scavenger, Mixmaster, scrapper, hightower and scrapmetal. The other two that were shown on the cliff didn't combine with the others.
Nope, the name Buckethead is not addressed by the crew, there’s no evidence to prove that the shovel is Buckethead, and Trans Theory's theory about the shovel being Buckethead cannot be supported either.
Interesting, i never noticed they gave the Cat Dozer and Track Loader a fictional model number. Which is kinda confusing. At first i thought it was cause of licensing issues. but they used a real Cat 773B Haul Truck. So why change the model number on the Dozer and Track Loader?
In a behind the scenes video I watched, one of the people working on the movie had a computer literally blow up in their face while they were working on one of Devastator’s scene.
It's part of the stupid clone concept they went with. It's two separate characters with the same design: Scavenger and Demolisher. The same thing happened with Rampage/Skipjack. I don't know why they did that...
Here is a fun fact the reason why devastator never stood up it so because all that weight would crush the construcons I think of am wrong correct me in the comments
Not a fan of the movie Devastator, but what this company did to bring him to life is just impressive, much respect for the designers that made it happen :D
this is my favorite Devastator model
wait, aren't they shrunk and brainwashed and sold to us?☹️☹️😞
Why this is the worst devastator combiner wars is a thousand times better@@RubyProductions88
And the computers that got fried trying to render him
This company also made this bayverse version but in the G1 green and purple scheme. It’s gorgeous!!
Half the robots modes are atrocious, but props to the company for doing a great job in working with the designs and props to you for your patience. Love it.
At least they have a combine mode and a robot mode. You can only do so much with limited dimensions of a toy
At least it's better than studio series, Mixmaster and longhaul was worse than this
The robot modes aren’t atrocious, the designs are. There all accurate to the film
This gonna give Jobby some good trauma
Yea😂
LOL
Imagine this next to Madoka Godzilla Prime
Definitely
His mind will SPLIT when watching this
I just can't deal with the balls dangling down there🤣
"I'm directly beneath... enemy scrotum"
LOL
"I'm right below enemy's scrotum!"
💀bro
lol
The most detailed toys ive ever seen congrats to all engineers to build this expectacular work of art ❤️
This is the most detail I’ve ever seen on any Transformers you in my life! The fake dirt on the vehicles looks incredible! 🤯
will always pefer the original Devastator over the movie one, but this model is just mindblowing
10:43 Scrapper is not a 992G. In the movie, it's more of a 992C or 992D front loader due to its z-bar linkage design at the front. The 992G has a single bucket cylinder but not Z bar linkage.
Thank for u info
@@RubyProductions88 No problem. Let me know if something is not right.
Incredible! How much money, time, and effort were put into this video. 👏👏👏
I spent around $700 for the figures and 70-80 hours making video
Where did you buy those transformers
RUby productions soy ultra Sonic movie saludando y gracias por el vídeo yo también tengo mis propios constructicons y creo que está bien que cada uno tenga lo suyo no
@@benhouston2009 show z store or aliexpress
@GeaGenesis Maria do you have a link to the page to buy it
Im just gonna say, this transformers have balls. 😮
Yeah bro lol
Please tell me you can remove them or I will do it myself
Skdmxmfkfk🎉
One day I'm going to get to this level with my stop-motion! One thing I need to work on is making my videos longer. This is definitely very well done & I love these versions of the Bayformer Constructions. Even though these aren't officially licensed figures, I find the overall aesthetic to be superior to the official Studio Series versions.
Keep it up bro!
@@RubyProductions88 Definitely!
finally, THE ENEMY SCROTUM
Glad to see that the most important parts were included
Dude, you have patience!!
This was so eye grabbing and entertaining
This does NOT look cheap 😳
Yes👍
12:41
Simmons: I am directly below the ENEMY'S SCROTUM!
Awesome, Devastator have two balls
LOL
Man this gave my inner child some next level satisfaction
To think that the Constructicons transform into vehicles intended to build but they combine into a robot that devastates
Devastator is plain large making him one of the largest transformers in the movies
¡Excelente vídeo! Muy diferente a los de otros canales que tienen contenido similar. Saludos desde Ciudad de México.
BRO WHAT COMPANY MADE THIS TOY ITS ABSOLUTELY INSANE!!! And is it just me or is long heals design so freaking good
Devil Saviour bro
the transformation is really accurate I like it
Great effort on the vid (yes I am a bit late to the party lol) for the most part the stop motion is excellent (and a lot better then what I could do) though some points I noticed to hopefully make your next content even better:
When you had the names of the transformers in the bottom left, it was hard to read sometimes because of white text on a white background - maybe add a red border to the text (to go in line with the whole Ruby Production theme)
In this video in particular, where a figure has more than two forms, a lot of the transformation sequences where left out, I know when I get a new figure for my collection I cant work out, ill often look to vids like this to help me - so adding in sequences for all forms would be cool
As mentioned for the vast majority of the actual stop motion is fantastically smooth, there were just some bits that seemed more choppy than others (I know things like unattached hooks cant be as smoothly done as folding panels etc) but there were some bits that might of needed a few extra frames just to smooth things out.
And lastly: some of the cuts to different angles where a bit jarring for the tempo/flow of the video, maybe add a cut effect?
as I said, I found the effort put into this video to be amazing and I am not looking to putting you down but just some friendly (and maybe unwanted) advice for going forward? Anyway keep up the great content
Thank bro!
I am genuinely proud that you have Scrapper and used confirmed things to help you, Scrapmetal’s Studio Series Toy Bios confirmed that the Shovel was Scrapmetal, also, Buckethead was a working for shovel, even, Paramount doesn’t do Buckethead.
*Working name*
I mean Hasbro because they were the ones who confirmed the Shovel to be Scrapmetal.
Buckethead was his own guy, if you look at the transformation scene scrapper becomes the right arm and another bulldozer becomes the left had that hand is presumed bulldog. But it could also be skipjack and the as figure is just wrong, it would explain long haul and overload being the same size and being legs
I honestly don’t even know if scrap metal was in the combination. Wasn’t he the little one they tore apart?
No dude, seriously, according to the Transformers size chart, Devastator was made up of 8, and Scrapmetal is the Bulldozer, and the TFWiki has no info of Buckethead in Revenge of the Fallen.
And learn how to respect people’s opinions.
Man that is very awesome
after seeing through this monster, i see it just the oversize of Legend Scale Devastator from ROTF, with more detail and more complex transformation, still looking good
It looks so movie accurate ngl!
Nice video. Hope to have that Devastator too
Thx bro
I can’t stop watching this❤
Yeah, I can see why he would crash computer systems in the movie design studios!! My goodness, he's very impressive!!
Awesome 💯
I like video tranformer not have hand touch like this awesome i thing😮
My genuine reaction throughout the video 😲😮
You deserve a subscribe and a like
Thank you so much
@@RubyProductions88 And for using confirmed canon to support your knowledge!
@@RubyProductions88 Where’d you got those construction vehicle names?
@@thejoker15678 yeha bro, I'm using canon and sony
@@thejoker15678 I refer to it on tfwiki bro
Robots got nards!
I couldn’t resist 😂
Balls?
EPIC VIDEO MAN
Thank bro
Good job! Great video! Hope you can do Cang Toys Predaking. Thanks
Wow! What a waste of plastic and money!!
Jokes aside…that is pretty badass, and he got his balls too
So why were the first two figures shown stop motion into combine form but the others aren't?
The old Devastator Gen1 (the green and purple one) looks much like a Transformer compared to this one that looks like a big bug. But I admit that this one is much more detailed.
WOW, name MASK shows up on the grill of MixMaster! Was he part of Matt Tracker's team?
Dude always has fire music with his videos I swear
I don't have many options sr
Isn’t that neffex music cos I’m a fan of their music
Amazing
damn this is great! accurate movie transformers robot toy.
It’s the fact one hangs lower than the other😂
Cool
thanks bro
Mmmm, y e s
Entertaining
Nunca me ha gustado la estética de los Bayformers, pero los diseñadores que hicieron que esta locura funcionara en un juguete del mundo real son magos absolutos.
That's right
Im actually glad they included the enemy's scrotum
Really enjoyed your video.
Glad you enjoyed it
😈😈😈
I bought the other version but this looks way cooler
'Best'
This is fr my fav Decepticon
I have a dream if buying this whole set one day! Sadly it'll be very difficult to find then since I cannot find one even now. But maybe someday.. maybe
hope you get it soon
@@RubyProductions88 Yeah, Thanks!
Nice balls bro
Yeah bro!
The fact i thought I had a playlist going is crazy to me I was just watching and jamming out 19 just to see how the rarest thing from my childhood looks fully combined together
7:50 That designer phoned it in. What does he do, hop to move around?
I wonder why it doesn’t have ten constructicons when in the movie there was ten
There was only 8 that combined, long haul, overload, skipjack, scavenger, Mixmaster, scrapper, hightower and scrapmetal. The other two that were shown on the cliff didn't combine with the others.
@@ShadowTheHedgehog1-s3ethey did!
@@CosmicHase yeah, I just found out a while ago. Payload and Buckethead iirc
Is that a masterpiece toys
No,It's Devil Savior Factory
Sorry for the correction but 9:34 that's bucket head
Nope, the name Buckethead is not addressed by the crew, there’s no evidence to prove that the shovel is Buckethead, and Trans Theory's theory about the shovel being Buckethead cannot be supported either.
The only Transformer with BALLS!
That’s how he really crushes his enemies
1:51 isn't that Demolisher? Great video though!
Thanks!
Well, it is Scavenger, because Demolishor is white, Scavenger is red.
Well done.
Thank bro!
Interesting, i never noticed they gave the Cat Dozer and Track Loader a fictional model number. Which is kinda confusing. At first i thought it was cause of licensing issues. but they used a real Cat 773B Haul Truck. So why change the model number on the Dozer and Track Loader?
Crazy video editing!
Ps. I don't understand the sense of combine mode 🤔
Thank bro!
Basically, these are construction robots combine into Devastator in Transformers ROTF
cool 😎
That is one awesome Transformer!
How long did it take you to make this, it awsome
I didn't calculate the specific time, but it still took a lot of time
I did not know that mixmaster had a cannon mode
It’s in the scene where he’s fighting nest, right before getting slain by Jetfire
Why did you skipped all those transformations ?
Nice mixmaster figure but he’s missing the cheater. Axle. A.k.a. the axle. For those who don’t know.
ABSOLUTELY LOVED IT
It's rampage 7:06
The red one is
great job!
классные трансформеры
😂😂😂😂😂😂😂😂😂😂😂😂
The one & only transformer who have balls
All but one of these songs were by NEFFEX
You can probably guess the names of said songs.
Great video btw
Thank bro
I need to get my hands on these.
That looks well hard to transform.
That's good. I hope if you get this figure. That it pisses you off
It will there's no ewy I'm gonna transform it.
@@Dan1ukflava yeah I hope you break it. Making you waste money.
I don't have it
Im sentinel prime im an ugly ttansformer more like 😂😂
His combine his heavy vehicles😊
Aqui los que le enquantan los Transformers 👇
Ok the bes ...les go on
The devastator has balls hanging😂
In a behind the scenes video I watched, one of the people working on the movie had a computer literally blow up in their face while they were working on one of Devastator’s scene.
There is neffex songs added. Just recognized at the end
This is just the legions class but cooler
I'M OLD SCHOOL I LIKE THE 86' CARTOON VERSION OF DEVASTATOR THE COMBO OF THE CONSTRUCTACONS☠️☠️☠️☠️
Dam so much details even the balls are hanging 😂
If Scavenger was killed by Optimus in the beginning of ROTF, then how did he end up being a part of Devastator later in the movie?
somebody help him?
That was demolisher the white version one
The all part of devastator they a'll is mass product bro
@@zezgmdedaccount3901 yea
It's part of the stupid clone concept they went with. It's two separate characters with the same design: Scavenger and Demolisher. The same thing happened with Rampage/Skipjack. I don't know why they did that...
Oh god it's split!... how was the transformation?
I NEED IT, N O W.
I wonder where did he found these collection and how much it cost?
It's from Devil Savior, Price is about $750
@@RubyProductions88 thank you for the details; it's so worth it.
@@mannyrosado9887 u r welcome bro!
Lol that wrecking balls
Here is a fun fact the reason why devastator never stood up it so because all that weight would crush the construcons I think of am wrong correct me in the comments
Did anybody notice that long haul’s truck mode has a spelling saying “GAT” (Gyat)
for copyright reasons (CAT) not allowed
1:51 dats demolisher if i could helped
also overload part all i can say was he should be a crab form. but anyway its good with those 2 legs
LOL
100000/10