Changing Hydraulic Filters On An Excavator - STEP BY STEP

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ • 55

  • @TekamoHD
    @TekamoHD  Рік тому +1

    DO OUR VIDEOS HELP? SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD

  • @leobhangu
    @leobhangu 4 роки тому +29

    Instead of taking the snap ring off , he should've rotate the filter 180° and remove the whole canister out. That way you are not releasing any dirt out. That's the right way.

    • @ADITYASHARMAACADEMY
      @ADITYASHARMAACADEMY 4 роки тому

      ua-cam.com/video/A6notw5fxGg/v-deo.html

    • @jondoherty3678
      @jondoherty3678 3 роки тому

      You have to take the snap ring off then turn 180 degrees

    • @Resleeved
      @Resleeved 2 роки тому +3

      Need to rotate the whole cannister 180 degrees, then remove the entire cannister and THEN change the filter and drain the dirty oil. Doing it this way keeps all the dirty oil in the tank.

  • @DB-oz2ki
    @DB-oz2ki 5 місяців тому +1

    I like your videos, however on this one, one thing got me. Remove the cap to the tank to remove any pressure, then put it back on. You left it off moving bolts over it, dropping a bolt into the tank could happen.

  • @nrxhavoc
    @nrxhavoc 3 роки тому +4

    chromes on an impact this guy is a savage

  • @heavymachinery2843
    @heavymachinery2843 3 роки тому +4

    I like to put bolts in plastic boxes or magnetic trays when i work on heavy equipment good work 👍

    • @TekamoHD
      @TekamoHD  3 роки тому

      Thanks for watching! Let us know if there's any video you'd like us to make.

    • @emichaelschmidt
      @emichaelschmidt 2 роки тому +1

      @@TekamoHD EGR/SCR delete!

  • @SunilSingh-xw2hg
    @SunilSingh-xw2hg Рік тому +1

    Good video im glad i found this❤❤

  • @jaichandkamboj3463
    @jaichandkamboj3463 5 місяців тому

    Your work is good

  • @amathonn
    @amathonn 4 роки тому +7

    Am I the only guy that sees a klutz like me dropping one of those bolts and watching it bounce into the hydraulic tank?

  • @maxpower9631
    @maxpower9631 Рік тому

    thanks Keith, have old Deere excavator....this will help !

    • @TekamoHD
      @TekamoHD  Рік тому

      you're welcome, glad it helped

  • @nelsonsantos770
    @nelsonsantos770 3 роки тому

    oil from the filter still looks so clean though!

  • @behelpful1435
    @behelpful1435 3 роки тому

    At 2:54, what do you mean be seal pieces?

  • @yunianisa8134
    @yunianisa8134 3 роки тому

    Trimakasih mister. Salam dari indonesia

  • @ramosel
    @ramosel 4 роки тому +14

    That's not the correct way to change the Hydraulic filter. You just dumped dirty oil into the tank line. There are directions on that handle on how to do it right.

  • @HarleyMothersole
    @HarleyMothersole 3 роки тому +1

    What snap on drill is he using?

  • @omerkhalil7065
    @omerkhalil7065 3 роки тому +1

    Very informativ vedios thanks for sharing this type of knowledg

  • @reelMn
    @reelMn 2 роки тому

    H thanks for the video. My Hitachi UH061 has a strange round smaller cap on the top of the suction filter - feels like rubber - it’s under the fluid level. I haven’t figured out how to remove it. Any ideas?

  • @bernhordredecop2319
    @bernhordredecop2319 2 роки тому

    Does it help to change the return filter for the hydraulic oil getting hot?

  • @martinkoche4375
    @martinkoche4375 9 місяців тому

    Thank you

  • @martinbernal5693
    @martinbernal5693 2 роки тому +2

    Loosen the cap, don’t remove it. Don’t want to accidentally drop a bolt down there. Ask me how I know about that.

  • @neilgordo4654
    @neilgordo4654 Рік тому

    What is the make of the Impact wrench

  • @leobardosantos259
    @leobardosantos259 4 роки тому +1

    How to replace hydraulic filter on 2007 304E CR ?

  • @jagannathmahapatra8057
    @jagannathmahapatra8057 4 роки тому +1

    After how much hours we change hydraulic filters?

  • @gokulratheesh7399
    @gokulratheesh7399 2 роки тому

    Which country you are working

  • @makimohamed1307
    @makimohamed1307 3 роки тому

    شكرا شكرا

  • @mdrajan1019
    @mdrajan1019 4 роки тому

    Hi sir. 1st thnx. Ur video is very useful. But 1 time u did mistake. U r open hydrolic tank cover. Remove gas but u not fix cover and remove bolt. Any bolt slip ur hand and drop in tank after to much prblm.

  • @operatormudascebeh4071
    @operatormudascebeh4071 3 роки тому +2

    Perfect

    • @TekamoHD
      @TekamoHD  3 роки тому

      Glad you think so. Let us know if there's any other video we can create to help.

  • @tomasgilboy5362
    @tomasgilboy5362 4 роки тому

    Dose it mater the level of the hydraulic oil tank wants it above the Minimum mark or can you put to puck oil in

  • @kristiheitz3022
    @kristiheitz3022 3 роки тому

    Do you know how to drain the hydraulic oil on a 938M wheel loader?

    • @Paetiance
      @Paetiance 3 роки тому

      Machine manual

    • @westernstar4964
      @westernstar4964 3 роки тому

      Open one of the side access doors. A tube will be routed there from the tank

  • @jaichandkamboj3463
    @jaichandkamboj3463 5 місяців тому

    You're work like it

  • @cocomaster3755
    @cocomaster3755 4 місяці тому

    Yeah I paused the video about 10 seconds too soon... Heads up everyone push the button on the Volvo push the button on the volvo!

  • @RAVINDRAKUL
    @RAVINDRAKUL 3 роки тому

    Hi wants to join your team.

  • @ЕрмаханКутлимурадов

    Фильтр гидрораспр

  • @Stevexnycautomotive
    @Stevexnycautomotive Рік тому

    A filter with no sump is a waste.

  • @jaybell9145
    @jaybell9145 4 роки тому +1

    U shud have changed new gloves when u held the new filters.dirt already clinged to ur gloves and will stick into new filter.

  • @mdrajan1019
    @mdrajan1019 4 роки тому

    Sorry if you felt hurt