Meinst du denn das du mit einem alu Rahmen genug streifigkeit bekommst ? Ich hatte mal ein gegossenes alu Hand E-Wheel gesehen . Weis aber leider nicht wie gut es funktioniert.
Hello Norbert, this is what I will need when I start the panels on my 63 Healey. I would prefer to make it out of aluminium. They also make the turnbuckles in aluminium. I have seen them with a small bent I beam instead of tubing. The Porsche is ready for sale I rebuilt the bottom end of the engine. It runs perfect. I am driving it right now. Cheers.
Hello Bernard, I thank you for watching, yes, in fact it is nothing new, just, i made it more useable, i will make one out of aluminum..... ; ) It really works great, i have worked here with almost no presure.... That is good that the Porsche is running now, it is a lot easier to sell than. Prices for Porsche are on a "all times high" at the moment..... ; ) You take care
Hi Paul, thanks for watching, my plan is to make the C-Clamp, out of Aluminum, the Rollers or the Wheels, will be made out of stainless steel tube. They will be machined on a latch, the bearings will be made out of plastic ; ) (www.igus.com/info/plastic-ball-bearings) hoping it alll will be light enough ; )
Very useful piece of equipment! can you tell me the outside diameter and wall thickness of the tubing used for the frame? I'd like to make something similar. Thanks, Mike
Hi Mike, sorry i was not that fast to anwer, the outside diam. from the tubing is 34 mm and the wall thickness is 3 mm. the overall length of the C-clamp is 730 mm, the short side is 580 mm. I will make one in aluminum with light wheels as well, so stay tuned..... ; )
Good afternoon Norbert, another very clever device for metal work. Thanks for the video. You have a great weekend. Take care and good luck.
Hi Steve, thank you. Wish you a great weekend to, stay healthy..... ; )
I’ve watched people using these and it is almost miraculous. Thank you for the memory.
I thank you for watching, yes, in fact it is nothing new, just, i made it more useable, i will make one out of aluminum..... ; )
Meinst du denn das du mit einem alu Rahmen genug streifigkeit bekommst ? Ich hatte mal ein gegossenes alu Hand E-Wheel gesehen . Weis aber leider nicht wie gut es funktioniert.
Hallo, es gibt aluminium sorten stärker als stahl (7075 zum beispiel), ich werde eins bauen und es ausprobieren, zu sehen dann auf mein Kanal.... ; )
Handwerk ist eine Bereicherung ❤
so, isses.... ; )
I was thinking the same thing! I do not have enough space for a floor model, and this would be great to put on the shelf.
Thank you for watching, well get to work than, this is also a good "Bench Top" model...... ; )
Schönes Video Norbert❤ Von dir kann man nur immer wieder lernen. Ich kanns immer kaum abwarten, ein neues Video von dir zu sehen. LG Steffen
Danke Steffen, ich bemühe mich..... ; )
👍👍👍!!!
; )
Hello Norbert, this is what I will need when I start the panels on my 63 Healey. I would prefer to make it out of aluminium. They also make the turnbuckles in aluminium. I have seen them with a small bent I beam instead of tubing. The Porsche is ready for sale I rebuilt the bottom end of the engine. It runs perfect. I am driving it right now. Cheers.
Hello Bernard, I thank you for watching, yes, in fact it is nothing new, just, i made it more useable, i will make one out of aluminum..... ; )
It really works great, i have worked here with almost no presure....
That is good that the Porsche is running now, it is a lot easier to sell than.
Prices for Porsche are on a "all times high" at the moment..... ; )
You take care
@@mobylas As soon as it is sold I will start on the Healey.
i haven´t done much on mine eather....... ; (
Once again really nice work. Would one made from 6061 have to much flex over that distance. Or will you make one from chrome Molly tube next?
Hi Paul, thanks for watching, my plan is to make the C-Clamp, out of Aluminum, the Rollers or the Wheels, will be made out of stainless steel tube. They will be machined on a latch, the bearings will be made out of plastic ; ) (www.igus.com/info/plastic-ball-bearings) hoping it alll will be light enough ; )
Very useful piece of equipment! can you tell me the outside diameter and wall thickness of the tubing used for the frame? I'd like to make something similar.
Thanks, Mike
Hi Mike, i will measure everything tomorrow, and write you again, i wrote it down somewhere, but forgot where i left it...... ; )
Hi Mike, sorry i was not that fast to anwer, the outside diam. from the tubing is 34 mm and the wall thickness is 3 mm. the overall length of the C-clamp is 730 mm, the short side is 580 mm.
I will make one in aluminum with light wheels as well, so stay tuned..... ; )
Thanks very much. That's very helpful, Mike@@mobylas