I'm 28 and just bought the 100cc version of these. I probably look like an oversized 17yo chav but I honestly don't care. "D'ya want an air rifle m8?" "d'ya wonna swap it for a mobile phone?" hahaha
I've Googled it & the Company is called MTKT. The part is here scooterpartshop.com/collections/mtkt/products/undertail-bodywork-underseat-tray-mtkt-grey-for-peugeot-speedfight-2 I think that this may be an American site, but it gives you an idea of what to look for.
Evening. Big ask. I'm trying to sort out a speedfight 2 LC for my lad. I replaced the crank seals, carb and battery as it was so difficult to start. Now, no spark whatsoever. So replaced the dellorto 8 pin cdi/oil pump, rectifier, coil, stator and still nothing. Whoever had it in past had wired in a 5 pin cdi to loom. Wires definitely not factory and wouldn't have thought it would have two CDI units anyway. After removing the 5 pin and restoring wires to what I believed original, again attempted to see if it sparked, nothing again. To cap it all off a coil on the new stator then started smoking as did rectifier. Something is seriously wrong somewhere. Did your speedfightlc have two CDI units on it when you got it? I can't find any specific wiring diagram or advice on the scooter shack forum. Lost?!!
I'll be honest, it was a long time ago that I did this rebuild. As far as I can remember, it only had the one. Might be worth investing in a 2nd hand loom & replace the one you have
Thats a chipkey version if im correct i have had one of Those before and is has a stator and a flywheel of its own those are different than that of a cdi version my advise get a cdi version speedfight and replace everything or junk that one
I'm 28 and just bought the 100cc version of these. I probably look like an oversized 17yo chav but I honestly don't care.
"D'ya want an air rifle m8?" "d'ya wonna swap it for a mobile phone?" hahaha
DW bout what people think I'm 30 and ride the 2 in my pic, love building scooters ❤
wow..verry nice, gretings from austria
Nice little ped ped builds ftw
I had forgotten all about these, l had one, not for me. Good video.
I think that they're a great looking scooter, but, I just felt like a right lemon when I rode it.
Heck im about to buy 1 tomorrow haha its gonna be my 6th speedfight
Not the fastest in the world but definitely the best looking scooter of it's time
Yamaha aerox decent engines @@holeyshed
From which scooter did you apply front suspension?
The front was from a Peugeot Vivacity
@@holeyshedis there any video and is it hard to put?
@@LukZ.ApennX It wasn't difficult, no. If you check on UA-cam, I'm sure there are plenty of videos available. I didn't make one unfortunately
Have you got a link for the undertray where the rear light goes been looking for them can’t find it
This was about 10 years ago. All I can remember was that I ordered it direct from a company in Germany, sorry
Where did you get the under back wheel light panel you said you got from Germany I want to get one they do look good :)
I've Googled it & the Company is called MTKT. The part is here scooterpartshop.com/collections/mtkt/products/undertail-bodywork-underseat-tray-mtkt-grey-for-peugeot-speedfight-2 I think that this may be an American site, but it gives you an idea of what to look for.
Hi what did you do with the old exhaust I’m wanting one for mine, if you still have it and would consider selling it?
I built this about 10 years ago, so, unfortunately, anything Speedfight related has long since gone
@@holeyshed ahh fair enough thanks for the reply, im enjoying the videos 👌
Evening. Big ask. I'm trying to sort out a speedfight 2 LC for my lad. I replaced the crank seals, carb and battery as it was so difficult to start. Now, no spark whatsoever. So replaced the dellorto 8 pin cdi/oil pump, rectifier, coil, stator and still nothing. Whoever had it in past had wired in a 5 pin cdi to loom. Wires definitely not factory and wouldn't have thought it would have two CDI units anyway. After removing the 5 pin and restoring wires to what I believed original, again attempted to see if it sparked, nothing again. To cap it all off a coil on the new stator then started smoking as did rectifier. Something is seriously wrong somewhere. Did your speedfightlc have two CDI units on it when you got it? I can't find any specific wiring diagram or advice on the scooter shack forum. Lost?!!
I'll be honest, it was a long time ago that I did this rebuild. As far as I can remember, it only had the one. Might be worth investing in a 2nd hand loom & replace the one you have
@@holeyshed I did think about that tbh.
Thats a chipkey version if im correct i have had one of Those before and is has a stator and a flywheel of its own those are different than that of a cdi version my advise get a cdi version speedfight and replace everything or junk that one
Hi!
I have a peugeot speedfight 2, and put a sports exhaust on it,what weight rollers do u recommend i put on it.
Pls respond😅
Thank you😊
It was so long ago I can't remember. The website I mentioned in the video is a wealth of knowledge & definitely worth joining 👍
If it's 50cc 6 grams
What you going to do with it Colin..dry your hair? Lol
What hair? 🤣With all of the upgrades, it flew. It was quite surprising to be honest.
Stupid opening music... 👋