Loving the fully floating anti roll bar bushing. Loving the rear window too. Wasn't sure about the modification, you sure have an eye. Keep on chopping.
Chad, A little advice for making the unit removable. I built the air system on my street rod and did the same approach so the system was mounted all together to be moved to the bench to troubleshoot it. I made plugs for all the electrical connections so the system could be unplugged to remove. Takes a little time but well worth it in the end.
I'm Amazed At Those Senor Switches! ... Seems Like That Rod And Switch Will See A Lot Of Action As You Drive Down The Road! ... Be Interesting To Know How They Hold Up! ... Again! Another Great Video Chad & Jolene!!!
Love watching your shows! Been working with metal since school. Not much beats constructing something useful from bare material. Keep up the good work. Oh totally jealous of anyone who has their own workshop. Can't sleep, go work on stuff. Stressed, depressed, anything, art is a great healer. ✌
Air ride sensors . I never had any luck with them . After watching this video I think I found out why I was having so many problems with it . Thumbs-up Jolene 👍 and 👍 Chad
Nice video...its cool how you explain what your doing each step of the way...the car looks really cool...be nice to see this one painted and the stainless applied..thanks Chad and Jolene for another great video
It's going to be awesome 👌 with air ride system just a thought to me it looks as if the tyres on full lock may rub on the sensor may have to put on the inside of chassis rail
Hey Chad love your & Jolene's show! I'd like to say when I get a piece done & fresh bare metal I like to prime it straight away, it can be a bit of a pain but in the long run it's saves time!
Hi all my favourite folk at Hiltz Auto fabrication. It's good to be back in the workshop wit you all. This is quality entertainment Of the best caliber. If I were young enough to take on board what you teach It would definitely make me want to have a goat it.
that back window looks outstanding, i don't like it when you announce you was going to change it, but I kept my gob short and just waited, outstanding.
Another very helpful and informative audio and video. Like Chad always says, if he can do it ,we can do it. Use you brain and figure it not and if it don't work the first time try again. Very good encouragement and advice. Thank you Jolene, Chad, and Fina. Bill
Good job on the sensors. Thanks for sharing your time with us again today.😊
Another lesson in my car life. Thanks guys👍👍
Hi guys, I hope your day is filled with laughter and beauty. Thanks for sharing your life with us.
Very interested in this procedure🤔 thank you bad Chad for sharing your knowledge !!
Your builds are amazing and inspiring thank you
Great to have a network of friends to help each other!
Loving the fully floating anti roll bar bushing. Loving the rear window too. Wasn't sure about the modification, you sure have an eye. Keep on chopping.
This is going to be fun to learn about. Thanks for the video
Every day is a learning day. Nice job Chad and joline
Work on the suspension continues. Another step toward completion of the Mercury. Keep on going Chad and Jolene!
Y
I love how you and your friends help each out. Jimbo is so comical and very knowledgeable. Your cars are amazing. I watch your videos every night.
Old school sites like you and Gasolini are the best source for those of us who don't have a shop with all the fabrication tools. Thanks.
Hi Jolene and Chad, Dennis here to watch another update on mercury. Thank you
Very good how to today. Seemed to go well with the ride height sensor.
Another great vid 🏴🇬🇧🏴
This seems simple as you explain it! Thanks!
Cool. Nice setup. Love watching and learning. Thanks for the hard work you two
I like watching your show everyday , thanks
Glad you’re back on the cars this looking amazing
Just love the one you want to see the fender on. Too cool
Great job guys, as always.😎👍
Greetings from Switzerland
Chad,
A little advice for making the unit removable. I built the air system on my street rod and did the same approach so the system was mounted all together to be moved to the bench to troubleshoot it. I made plugs for all the electrical connections so the system could be unplugged to remove. Takes a little time but well worth it in the end.
another good video, enjoyed watching you figuring things out with air suspension and picking up a few tips for myself. keep doing what your doing.
This will be an interesting show. Few people do or know how to do this. Thanks Chad!
Another great explanation of how to do it from Chad. Thanks much
Great lesson today. Thank you!!!
Another great video, I enjoy this car, it will look great once its done.
good video ,thanks
nice one looking forward to the show thanks chad and jolene
That is a pretty nice air ride system! Gonna be cool too this car cruisin.
Hope your buddies get well soon. Elvis is looking great! Keep on keeping on!
That's cool. I've never seen an air ride system be installed quite interesting it was
Elvis is 1 cool car..can't wait to see it painted an finished
LIKE ALWAYS YOU MAKE THINGS LOOK EASY!!
man...that is a sweet air bag system. Henry, what a nice guy!
I'm Amazed At Those Senor Switches! ... Seems Like That Rod And Switch Will See A Lot Of Action As You Drive Down The Road! ... Be Interesting To Know How They Hold Up! ... Again! Another Great Video Chad & Jolene!!!
Nice to see the process of the air suspension install.Starting to look like it will be a great tour boat
This will be another learning video waiting and watching from ohio
Love watching your shows! Been working with metal since school. Not much beats constructing something useful from bare material. Keep up the good work. Oh totally jealous of anyone who has their own workshop. Can't sleep, go work on stuff. Stressed, depressed, anything, art is a great healer. ✌
Another great video love watching the two of you guys
Very suspenseful... 😃
Love watching how you figure things out !
Great vid, thanks for all ideas and explanations of how everything works
elvis says thank you verrrry muchh!
Nice work on the suspension. Love the look of the car. Keep on the good work. Cheers from Quebec!
Looks like it’s coming along pretty good. Gonna be nice 👍🏻
Air ride sensors . I never had any luck with them . After watching this video I think I found out why I was having so many problems with it . Thumbs-up Jolene 👍 and 👍 Chad
Keep up the great work really enjoy the daily content
Another new system always learning with new stuff
Great stuff ,really like that second Bugatti
I'm just Wondering about the Tyre clearance when you turn hard left or right .. do you have enough to turn
Great to see you learning a new point of your cars. Nothing beats valuable skills. Thins is going to make a sweet ride. Jolene always a great videi.
Looking good Chad.
Can't wait to see the air ride working 🙌
Excellent tutorial as usual, thank you Chad and Jolene.
perfect job lining up nicely
Nice video...its cool how you explain what your doing each step of the way...the car looks really cool...be nice to see this one painted and the stainless applied..thanks Chad and Jolene for another great video
Chad it’s awesome the way you explain what ur doing. You are quite a teacher. Keep up the. great job you r doing.
It's going to be awesome 👌 with air ride system just a thought to me it looks as if the tyres on full lock may rub on the sensor may have to put on the inside of chassis rail
I watched a bit on FB earlier today... 👍
Thanks for sharing Chad. Very informative video and always fun to watch you figure these challenges out!
👍🏻I’ll say, your all adjusted!😎
So happy to see Bugatti #2 in the garage. I love how you have changed that Chevy body
New to the channel, and enjoyed what I saw. Your talented and knowledgeable. Thanks!
Howdy, enjoy watching whatever you guys are doing
Nice to see that air suspension is all sorted out
Great video again,I hope you've got enough clearance for the tire ,thanks for sharing,keep up the good work,you're a great team
Can’t wait to see this in paint 👌
Hey Chad love your & Jolene's show! I'd like to say when I get a piece done & fresh bare metal I like to prime it straight away, it can be a bit of a pain but in the long run it's saves time!
Little bits at a time. It will get done. I've been there! Looks good!!
Just another rockin video! You and Jolene are hitting it out of the park...
Awesome !!!!!
What a great show !
Everyday is a school day and today we are learning air ride sensor set up. Thank you Chad and Jolene for continuous car content. Rock on!
Loving the hard work you put into your builds, and watching your brain tick! So glad I found your channel!
Hi all my favourite folk at Hiltz Auto fabrication. It's good to be back in the workshop wit you all. This is quality entertainment
Of the best caliber. If I were young enough to take on board what you teach It would definitely make me want to have a goat it.
Its always hard when tryin sum new, But it always fun man.. Learn new stuf every day if you try. Thanks for the vid, Awesome.
This is great stuff you are showing excellent for those wanting to learn
As always great show daily watch for me thx
Love the windshield!
You make it look soooooo easy .
Great work Chad again and jolene for the filming
Making it look easy🤙
that back window looks outstanding, i don't like it when you announce you was going to change it, but I kept my gob short and just waited, outstanding.
Always enjoy the content. There,s something different happening everyday. Thanks Chad and Jolene
Great job thanks for sharing
coming along nicely
Another very helpful and informative audio and video. Like Chad always says, if he can do it ,we can do it. Use you brain and figure it not and if it don't work the first time try again. Very good encouragement and advice. Thank you Jolene, Chad, and Fina. Bill
Chad you are doing a fine job taking care of Elvis , going to ride like a dream.
I remember you opening that air system, what a gift!
You're doing a awesome job 😎
Nice to see you back on the elvis car Chad !! Air ride so cool
Cant wait to see it done
Gettin fancy, I like it
I can't wait to see this one or the 40 done. I like both rides.
very cool teaching things and stuff
you are a great instructor
great show as always thanks guys .the trim above rear window looks so cool on elvis grand work there
Your truly amazing people
thoughts are with your friends chad, hope all goes well with them mate
Another job well done 👍