This upgrade is only for Stihl homeowner saws. MS170-251. I'd have put felling spikes on the 170 in the video. I've done both the tensioner and spikes on my 170. These upgrade parts are 1123 parts, which are the 210-251 saws. The tensioner, spikes, oil pump, clutch drums are interchangeable on the 1130 (170 & 180) saws.
Thanks for sharing! Came in handy as I'm going to do this mod today on my dad's MS170. Very well made video BTW, clear & concise! Greetings from Germany, Gereon
Just wanna say, great job on these informative videos. I’m a subscriber and fellow Canadian, and live in a community where you have to be hands on, so your tutorials are much needed. Thank you.
Dony- Just ordered this for two of my MS170 saws (one found in a field & I fixed up) because of you. Highly recommend THE STIHL OEM UPGRADE (currently $20 in the USA over on the Stihl Amazon). I owe you one, Dony. Those front adjusters drive me crazy.
Thank you so much! I just converted my 180 today and it only took about 30 minutes taking my time. The old toolless adjuster didn't hold tension and was frustrating to use--I'm glad it's gone. The entire upgrade was about $25.
I like my MS170, they come with no gasket between the muffler and cylinder. My saw was getting nasty in that area. I ordered one meant for an MS250, much better now.
I went looking to do this at my local dealer, about a year ago, and he said no, not available for this saw. Thanks to your video, I now took the part number and ordered the kit, which arrived today. Easy installation!!! Now if I could just get my 038AV started as easily I'd be all set. Thanks for the video.
Thank you Donyboy for all the stihl chainsaw videos. You have effectively eliminated the need for me to send any saw in for service. All the way down in Florida I might add. Excellent how to videos sir. Thank you and keep up the good work.
Thanks for a nice clean tutorial! I did this upgrade 2-3 years ago, it has worked perfectly, much more accessible than original. I also added metal dogs, another simple addition.
Totally off topic but my snowblower was doing the surging shuffle. Went back in your vids and found the one that fixes the problem. Didn't have a carb kit but I did remove the jet with the plastic cap and drilled the jets as recommended and now runs great. Just saved myself a couple of hundred dollars on a service. Thanks a lot it was perfect..
No more carrying an extra long screwdriver to get to the original location..I carry a 1/2" rachet with the 3/4" socket and an old extra long screwdriver everytime there is a downed tree on our property..going to get this part for my 170 Monday.. excellent video and mod.
The Stihl Engineer who designed the single front chain adjustment screw should be ashamed of him/her self, taken outside the factory, have his/her pants lowered and given a swift kick in the butt. So there...
Hello Don I have an MS170 it’s all I need for what I do with it. I have meant to do this upgrade for some time and while visiting my mom I saw your video and used the part number you gave us and ordered the kit. It’ll be so much easier tightening the chain now. I’ll have to look at the video you have for that hidden grease spot on the clutch so I can grease it before any damage occurs. Enjoy your videos from SS Marie, Ontario
I have recently done this to my little 170. A handy modification but not crucial, just easier to adjust the chain. Also I’ve added metal dog spikes which are a lot better than the standard plastic fantastics. With a decent chain I can use the little stihl all day on smaller wood, nice and light. Otherwise I use one of my bigger chainsaws on the big limbs/trees. Like your videos. Cheers
I like this video. I only have one saw anymore with a front adjuster- my 35 year old Super 25 Poulan. All my Stihl's have either side adjuster or they are the E version. I hate those front adjuster saws. If I ever end up with a front adjuster I will convert it as outlined in your video.
Nice video, it helped when I put on the side mod Tension Adjuster. It was easy. Just have to be sure thet when the put ths saw back togther that you center the chain in the sprocket. Next I;m gonna put on the metal dogs.
Great video Don, thanks so much. Utterly brilliant no-brainer upgrade - any chain adjustments using the old position are a right pain, you can never quickly find the adjuster when it's covered with sawdust and it's easier to cut your hand on the chain. Having the side adjuster makes it SO much easier and far more likely that I'll keep the chain adjusted just right, it's so quick and hassle free. Super video, nice and concise and really well shot 👍👌👏.
Good upgrade..wish they did that to all chainsaws..i have a home lite chainsaw that's about 35 years old..it been a good one I've never had a problem with it until now..the bar hold down bolt has stripped out..which isn't a big problem you just have to disassemble the saw to replace it..thanks for showing this..see you on the next one..Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸
Inspired, I bought the Stihl OEM part and installed in my 021 purchased in mid 90's. Had replaced sprocket cover years ago - that part had hole in it for side adjuster. Bottom line: works, but not nearly as smooth as Dony's. My metal kit parts fit very tightly in plastic part, not as nice as in video. Hopefully over time it will loosen up? Regardless, a great improvement and THANKS for another great video.
I would highly recommend as another MS170 MS180 upgrade doing a conversion to 1/4” Picco chain, bar, and sprocket. The narrow kerf and usually shorter chain like a 12” bar similar to those on Stihl pole saws or battery powered saws means less resistance because of a narrow kerf and less teeth to have to drive in the cut. This was a HUGE upgrade for me and I found the MS170 with the side adjuster and narrow kerf chain transforms this saw from feeling underpowered too a limbing/firewood hungry little monster. I also took it up another notch and added an adjustable carburetor but honestly it does fine even with the stock carb. This is my go to saw when I put on waders and have to clear downed branches in the creek/canal that people kayak ever Sprig and Summer and usually Fall/Winter brings a lot of downed branches. I find this saw much more nimble, fast cutting, and less tiring to lug around in the water or up embankments. Stihl is selling similar power to weight ratio saws with similar bar setups which are basically top handle saws converted to be rear handle saws for $200 to $300 more than the cost of this saw. If you own and operate a STIHL pole saw this a very logical upgrade/mod because you’ll already have this bar and chain in use and it always helps running similar chains and bar sizes that are interchangeable for simplicity sake when in the field.
I went to my dealer today to get the chain tensioner upgrade kit for my MS170. I provided him with the part number. The first thing he said to me, "Did you watch the UA-cam video too? I've been selling a bunch of these!"
Thank you, a very useful few minutes watching your video! I will do this mid this weekend! The 170 is my trim/back/back up and occasionally helps me of a bind saw!
Great Tip DB73 i didn't know this upgrade was available, I have just rung my local Stihl dealer and he has them in stock for under $40 Aus dollars including the GST
You can also upgrade the bar and chain from .043 gauge to .050 gauge. No need to do the drum sprocket(same chain pitch). Now you can use the 63 PS full chisel 3/8 picco chain. Full chisel feature not available in the 61 PMM3 chain (.043 gauge).
I did the same. Dony had a great video to upgrade to .050 Guage. Actually my dealer swapped out the bar and chain when I bought it. 14" 50 dl (which is same setup as my top handle 020T) Nice
Excellent video Going to order one this week but it will cost more because I live in Nova Scotia Halifax I love the 170 for limbing and use my 500i for the big stuff I did not realize that stihl saws were made in China
Would love to do this on my MS180c - but do you know of a kit to get rid of the tool less chain adjuster for this saw too I could do at the same time? I think it’d be a new cover and another stud to add for the bar mount. Thanks!
Same Kit as in the video $14.40 on AMAZON, plus a new MS-170 clutch cover (which will fit the 180c), Chinese (comes with two studs & nuts for $10.98 on Amazon) or OEM Stihl 170 clutch cover for about $35.00. HTH
@@allenhenry1113 they clog up down the road and is a restriction. I did notice a difference in top end on mine, it was very noticeable. Once it clogs the saw boggs down easy and just runs like crap. It's easier to remove it and never have to worry about it.
@@minibikemadman my 180 is running like that now. It starts up good, but it wont come to full power, when I try to cut with it, it boggs down and dies. Do you think this is or could be my problem ? Or something else?
Thank you for making and posing this video, Don. It's a wonderful upgrade. (And a very nice saw. I have an old/lightly used Homelite Super2 that I use to trim my arborvitaes, still runs good. Your video on lubing the drive shaft at the clutch is another great tip. Thank you much). God Bless.
Hello! I'm so GREATFUL for your channel! Can you tell me please, is the MS170, able to be converted to an easy start?" I'm a carver (61 yrs young, female) and if so, please make a video! Thank you!! For all you help!
@donyboy73 great mod, same question: 021 does not have a hole in the sprocket cover to accommodate a mod like this. Is there a solution for that? (1993 021=great saw/horrible tensioning)
great!! just got 2 used ms170 s, 1 has bad chain brake, and both have that side adjustment screw , saw few of your other vids , great that you show and say part # s , price... canada , eh ?? been years since i been there, miss it ,, 13 %,tax, ..yea , that pst & gst , bunch of hosers !! thought our 7 % here was bad .., thanks4 the great vids, drink some of that good hi- powered canadian beer 4 me , eh ?? , take off!!
That's a nice little tip Donny. I have an older 180 version although I believe I have a side adjustment on mine, I'll have to check. In any case what size bar do you have on your saw? Whats the maximum length could I get away with. On my 180? Thanks and good luck.
The MS170 is a model designed just for "home owners" who would simply just buy a $5 450mm long philips #2 screwdriver (or bit) to easily adjust from the front instead of keep quarelling with their tools.
I have a sthil 180 easy start. I mixed the fuel as the bottle says. But the saw seems to be under power. When i put the bar on the wood the saw wont cut it . It dies. Can you help? Thanks
looks good, I did the bar/chain upgrade on my 170 a few years back and turned it into a real saw, great limbing saw and can cut medium logs pretty well too
Dony, I have same question. Fortunately my hometown dealer changed it out to 14" .050 ga 50 dl. and extra chain half price. As a bonus, it's same as Stihl 020T top handle saw.
So, after watching this video and loved what I saw I called my local dealer and told me he couldn’t find the part on the Stihl web site he had(?)! I then asked for the company phone number and he wouldn’t give me that either! 🤨 So, I called another shop and got it ordered right away! 😃 Go figure!!!!
I bought my 290 over 12 years ago and it has the side adjuster. The problem I have is keeping the blade tight. And yes, I lift the bar before tightening. No the chain is not stretching, it just cannot maintain the tension for more than about 30 mins. Any ideas?
Will the kit fit other Stihl saws with front access screws?
This upgrade is only for Stihl homeowner saws. MS170-251. I'd have put felling spikes on the 170 in the video. I've done both the tensioner and spikes on my 170.
These upgrade parts are 1123 parts, which are the 210-251 saws. The tensioner, spikes, oil pump, clutch drums are interchangeable on the 1130 (170 & 180) saws.
@@TheKrayusKorianis well said thank you
Is there a similar kit for 241?
@@bobbeal7425 Should be the same for the Pro series, MS 240-261.
Thanks for sharing! Came in handy as I'm going to do this mod today on my dad's MS170. Very well made video BTW, clear & concise! Greetings from Germany, Gereon
Just wanna say, great job on these informative videos.
I’m a subscriber and fellow Canadian, and live in a community where you have to be hands on, so your tutorials are much needed.
Thank you.
Dony- Just ordered this for two of my MS170 saws (one found in a field & I fixed up) because of you. Highly recommend THE STIHL OEM UPGRADE (currently $20 in the USA over on the Stihl Amazon). I owe you one, Dony. Those front adjusters drive me crazy.
Thank you so much! I just converted my 180 today and it only took about 30 minutes taking my time. The old toolless adjuster didn't hold tension and was frustrating to use--I'm glad it's gone. The entire upgrade was about $25.
I like my MS170, they come with no gasket between the muffler and cylinder. My saw was getting nasty in that area. I ordered one meant for an MS250, much better now.
I did this upgrade about a year ago, as well as adding the metal spikes. This is a great upgrade to this little saw! Highly recommended!
Did my adjuster upgrade yesterday. Good winter/COVID Lockdown project.
Honestly front adjusters are a pain. Good mod Don!
I went looking to do this at my local dealer, about a year ago, and he said no, not available for this saw. Thanks to your video, I now took the part number and ordered the kit, which arrived today. Easy installation!!! Now if I could just get my 038AV started as easily I'd be all set. Thanks for the video.
I'm a heavy equipment and farm equipment mechanic and I like your videos, keep Up The good work 👍 and have a great Day.
I did this a while ago after losing a part from the front adjuster of my 170. It's much more convenient. Great video!
Yes this kit should be available for all chain saws. It makes adjusting the chain so much easier. Thanks for all the tips.
I put the metal bucking spikes on my 170's those plastic ones just don't grab good enough, but I will be doing this to them.
Thank you Donyboy for all the stihl chainsaw videos. You have effectively eliminated the need for me to send any saw in for service. All the way down in Florida I might add. Excellent how to videos sir. Thank you and keep up the good work.
I am going to get a side adjuster kit from my local Stihl dealer for my new ms 170.
Thanks for a nice clean tutorial! I did this upgrade 2-3 years ago, it has worked perfectly, much more accessible than original. I also added metal dogs, another simple addition.
Great to hear!
I upgraded my Craftsman chainsaw that had a thumb tensioner. It was garbage. I did an upgrade like you and it works great. Nice job.👍👍👍
Totally off topic but my snowblower was doing the surging shuffle. Went back in your vids and found the one that fixes the problem. Didn't have a carb kit but I did remove the jet with the plastic cap and drilled the jets as recommended and now runs great. Just saved myself a couple of hundred dollars on a service. Thanks a lot it was perfect..
Great to hear!
Well done Donyboy! Stihl should have shipped it that way to begin with.
Exactly the video I was looking for. Found the Stihl OEM kit on Amazon for $31.75 USD AFTER 6% tax.
No more carrying an extra long screwdriver to get to the original location..I carry a 1/2" rachet with the 3/4" socket and an old extra long screwdriver everytime there is a downed tree on our property..going to get this part for my 170 Monday.. excellent video and mod.
The Stihl Engineer who designed the single front chain adjustment screw should be ashamed of him/her self, taken outside the factory, have his/her pants lowered and given a swift kick in the butt. So there...
Thank You for all your informational videos, very useful and directional!
Nice upgrade but using front adjuster was the norm having 028s for years. Learned that a regular flat screwdriver works much better than the scrench.
Thank You!!! Best demonstration I have seen, appreciate this!!!!
I did the upgrade, also the steel claw, now,... a very nice machine.
I installed this kit on two of my MS170s
Hello Don I have an MS170 it’s all I need for what I do with it. I have meant to do this upgrade for some time and while visiting my mom I saw your video and used the part number you gave us and ordered the kit. It’ll be so much easier tightening the chain now. I’ll have to look at the video you have for that hidden grease spot on the clutch so I can grease it before any damage occurs. Enjoy your videos from SS Marie, Ontario
I have recently done this to my little 170. A handy modification but not crucial, just easier to adjust the chain.
Also I’ve added metal dog spikes which are a lot better than the standard plastic fantastics.
With a decent chain I can use the little stihl all day on smaller wood, nice and light.
Otherwise I use one of my bigger chainsaws on the big limbs/trees.
Like your videos. Cheers
Great "UP GRADE", I'm not a fan of the front adjusters. Good explanation of the installation 👍
Just got a new adjuster today your video will help me out
I like this video. I only have one saw anymore with a front adjuster- my 35 year old Super 25 Poulan.
All my Stihl's have either side adjuster or they are the E version. I hate those front adjuster saws. If I ever end up with a front adjuster I will convert it as outlined in your video.
Nice video, it helped when I put on the side mod Tension Adjuster. It was easy. Just have to be sure thet when the put ths saw back togther that you center the chain in the sprocket. Next I;m gonna put on the metal dogs.
Great video Don, thanks so much. Utterly brilliant no-brainer upgrade - any chain adjustments using the old position are a right pain, you can never quickly find the adjuster when it's covered with sawdust and it's easier to cut your hand on the chain.
Having the side adjuster makes it SO much easier and far more likely that I'll keep the chain adjusted just right, it's so quick and hassle free. Super video, nice and concise and really well shot 👍👌👏.
Good upgrade..wish they did that to all chainsaws..i have a home lite chainsaw that's about 35 years old..it been a good one I've never had a problem with it until now..the bar hold down bolt has stripped out..which isn't a big problem you just have to disassemble the saw to replace it..thanks for showing this..see you on the next one..Cheers 🍻🍻🍻🇺🇸🇺🇸🇺🇸
We were in the Oklahoma ice storm 2 weeks ago. Ms170 best seller
Not sure why this isn’t standard. But a Donny boy video is always a welcome addition.
Did this last year for family and friends for Christmas :)
I'm still learning all good stuff on this channel. Good afternoon DB73. Thank you. Stay Safe Everyone..
Thanks, you too!
Inspired, I bought the Stihl OEM part and installed in my 021 purchased in mid 90's. Had replaced sprocket cover years ago - that part had hole in it for side adjuster. Bottom line: works, but not nearly as smooth as Dony's. My metal kit parts fit very tightly in plastic part, not as nice as in video. Hopefully over time it will loosen up? Regardless, a great improvement and THANKS for another great video.
I would highly recommend as another MS170 MS180 upgrade doing a conversion to 1/4” Picco chain, bar, and sprocket. The narrow kerf and usually shorter chain like a 12” bar similar to those on Stihl pole saws or battery powered saws means less resistance because of a narrow kerf and less teeth to have to drive in the cut. This was a HUGE upgrade for me and I found the MS170 with the side adjuster and narrow kerf chain transforms this saw from feeling underpowered too a limbing/firewood hungry little monster. I also took it up another notch and added an adjustable carburetor but honestly it does fine even with the stock carb. This is my go to saw when I put on waders and have to clear downed branches in the creek/canal that people kayak ever Sprig and Summer and usually Fall/Winter brings a lot of downed branches. I find this saw much more nimble, fast cutting, and less tiring to lug around in the water or up embankments. Stihl is selling similar power to weight ratio saws with similar bar setups which are basically top handle saws converted to be rear handle saws for $200 to $300 more than the cost of this saw. If you own and operate a STIHL pole saw this a very logical upgrade/mod because you’ll already have this bar and chain in use and it always helps running similar chains and bar sizes that are interchangeable for simplicity sake when in the field.
I went to my dealer today to get the chain tensioner upgrade kit for my MS170. I provided him with the part number. The first thing he said to me, "Did you watch the UA-cam video too? I've been selling a bunch of these!"
Thank you, a very useful few minutes watching your video! I will do this mid this weekend! The 170 is my trim/back/back up and occasionally helps me of a bind saw!
Awesome upgrade Don! Did the same thing myself (and made a video) with the aftermarket version. Definitely less expensive but probably not as durable.
Great Tip DB73 i didn't know this upgrade was available, I have just rung my local Stihl dealer and he has them in stock for under $40 Aus dollars including the GST
You can also upgrade the bar and chain from .043 gauge to .050 gauge. No need to do the drum sprocket(same chain pitch). Now you can use the 63 PS full chisel 3/8 picco chain. Full chisel feature not available in the 61 PMM3 chain (.043 gauge).
I did the same. Dony had a great video to upgrade to .050 Guage. Actually my dealer swapped out the bar and chain when I bought it. 14" 50 dl (which is same setup as my top handle 020T)
Nice
Now that's an upgrade worth doing, ATB from England
have a good weekend Rob
Thank you for supplying the part numbers. That's a great help.
Excellent video Going to order one this week but it will cost more because I live in Nova Scotia Halifax I love the 170 for limbing and use my 500i for the big stuff I did not realize that stihl saws were made in China
Good video and good mod. They should have installed it from the factory.
Nice upgrade. Glad there is no 13% tax on thinking yet!
it's coming soon!
Would love to do this on my MS180c - but do you know of a kit to get rid of the tool less chain adjuster for this saw too I could do at the same time? I think it’d be a new cover and another stud to add for the bar mount. Thanks!
And two nuts
Same Kit as in the video $14.40 on AMAZON, plus a new MS-170 clutch cover (which will fit the 180c), Chinese (comes with two studs & nuts for $10.98 on Amazon) or OEM Stihl 170 clutch cover for about $35.00. HTH
I have a 180 cbe. I love the side chain adjustment. Make sure you rip that screen out of the muffler.
Why rip out the screen? I to have that saw.
@@allenhenry1113 they clog up down the road and is a restriction. I did notice a difference in top end on mine, it was very noticeable. Once it clogs the saw boggs down easy and just runs like crap. It's easier to remove it and never have to worry about it.
@@minibikemadman my 180 is running like that now. It starts up good, but it wont come to full power, when I try to cut with it, it boggs down and dies. Do you think this is or could be my problem ? Or something else?
@@allenhenry1113 ya take the muffler off and take that screen out. If you run a lot of oil it will clog even faster.
That kit is worth every penny👍
Cool! I wish this upgrade was available for my Husqvarna.
Thank you for your informative videos, what saw does the new part come from?
Good morning Don.Really good to see you again and that's a nice upgrade for that little saw.I have a 180 myself.Good day sir.
Thanks 👍
Thank you for making and posing this video, Don. It's a wonderful upgrade. (And a very nice saw. I have an old/lightly used Homelite Super2 that I use to trim my arborvitaes, still runs good. Your video on lubing the drive shaft at the clutch is another great tip. Thank you much). God Bless.
Great news. I am gonna buy it. Thanks
Hello! I'm so GREATFUL for your channel! Can you tell me please, is the MS170, able to be converted to an easy start?" I'm a carver (61 yrs young, female) and if so, please make a video! Thank you!! For all you help!
yes you can but better to buy the ms180 instead
@@donyboy73 I have the 180. But the tree 170's I have difficulty starting in comparison. Why do you not recommend it?
Thanks Donny. Will this kit work on a 25+ year old 021? I hate the front tensioner on it.
@donyboy73 great mod, same question:
021 does not have a hole in the sprocket cover to accommodate a mod like this. Is there a solution for that? (1993 021=great saw/horrible tensioning)
I have an old 025 that i converted to thumb adjustment type. If you cannot use the other upgrade. This one might be the one you could use
great!! just got 2 used ms170 s, 1 has bad chain brake, and both have that side adjustment screw , saw few of your other vids , great that you show and say part # s , price... canada , eh ?? been years since i been there, miss it ,, 13 %,tax, ..yea , that pst & gst , bunch of hosers !! thought our 7 % here was bad .., thanks4 the great vids, drink some of that good hi- powered canadian beer 4 me , eh ?? , take off!!
That's a nice little tip Donny. I have an older 180 version although I believe I have a side adjustment on mine, I'll have to check. In any case what size bar do you have on your saw? Whats the maximum length could I get away with. On my 180? Thanks and good luck.
16" is what those saws come with
donyboy73 thank you. It looks longer than 16" in the video, perhaps because the head is small?
@@bluekingfisher1416 possibly
Yes, my MS180 is about 5-6 years old and came stock with the side adjuster.
This one was just perfect !! I will do this upgrade to mine. Thanks !
Nice upgrade I’ll be doing this on mine, thanks!
did the package come with the T27 torx screw?
Can I use a 16inch 50 gauge bar and chain on my ms180?
Great upgrade video. Thanks for sharing Don. Cheers mate 🦘🇦🇺.
Hope Stihl makes this MOD for all their saws... if possible.
Who designed that saw that adjustment on the front is like going back to the Stone Age 😂
The MS170 is a model designed just for "home owners" who would simply just buy a $5 450mm long philips #2 screwdriver (or bit) to easily adjust from the front instead of keep quarelling with their tools.
I have a MS180 16in and my chain keeps on stretching to the max and wont fit. should I use a smaller size?
What gauge bar are you running .043 or .050
Good video as always! Thanks!
That looked like fun ! Nice video Don, thanks ! 👍
The chain tensioner on a 170 is like having windows on your car you need to manually roll down!
Any advice on were to get a 81 drive chain for a 24in bar cheap
I have a sthil 180 easy start. I mixed the fuel as the bottle says. But the saw seems to be under power. When i put the bar on the wood the saw wont cut it . It dies. Can you help? Thanks
Have you sharpened the chain properly ?
@@j.chrisbeck7492 new chain
Good one mate
thats the original bar & chain that comes with the 170 or did u install another one?
original 16" that came with it
looks good, I did the bar/chain upgrade on my 170 a few years back and turned it into a real saw, great limbing saw and can cut medium logs pretty well too
Dony, I have same question. Fortunately my hometown dealer changed it out to 14" .050 ga 50 dl. and extra chain half price. As a bonus, it's same as Stihl 020T top handle saw.
nice and clear allan
Would like to see shop tour
That's a great idea! Thanks!
as always great information thanks
Thank you Donny!!!!
Thanks for all the great videos!!!
WOW! The parts kit alone was more than 10% of the saw's price.
Stihl sells the 170 at a pretty low price point, if you want extra features, you either have to add them, or buy a more expensive model.
@@j.chrisbeck7492 I agree and it is a nice saw, especially compared to competition.
About $30 u.s. now, but well worth it in my opinion
nice tip ! Thanks for sharing Donny !
Great video, and Have a good week end
Good upgrade
Thanks for this.
Will this work on the MS180 as well 🤔
yes
Nice job 👍
Another informative video. Thanks for sharing.😊
So, after watching this video and loved what I saw I called my local dealer and told me he couldn’t find the part on the Stihl web site he had(?)!
I then asked for the company phone number and he wouldn’t give me that either! 🤨
So, I called another shop and got it ordered right away! 😃
Go figure!!!!
Thanks Don
I bought my 290 over 12 years ago and it has the side adjuster. The problem I have is keeping the blade tight. And yes, I lift the bar before tightening. No the chain is not stretching, it just cannot maintain the tension for more than about 30 mins. Any ideas?
Could be studs getting lose in saw
The MS170 model can be change the chain blade into bigger size like 17" above ?
(Normal size 12 to 16)
only goes up to 16"
It cant be converted into big chain ? And what the purpose if you change the adjuster ?
Thanks for sharing dony, I did't know that was possible.
Glad to help
Where can I get the bigger bumper spikes for my 500i in Canada