Це відео не доступне.
Перепрошуємо.
Suzuki Samurai Cylinder Head Removal & Discovery
Вставка
- Опубліковано 3 тра 2018
- In this video I show ya'll how to remove the cylinder head off the Suzuki Samurai and I make an interesting discovery.
If you would like to help support the channel check out ELK Motorsports Patreon Page:
/ elkmotorsports
Equipment I use to make videos with:
Panasonic G7: amzn.to/2qUrc7K
SD Card: amzn.to/2qUT8sd
SunPak Tripos: amzn.to/2r0cUTd
Rode Video Micro: amzn.to/2HNaqkC
48" Camera Slider: amzn.to/2HFGTt9
Welcome to ELK Motorsports. My name is Trey Koepsel and on this channel the content will be mainly centered around my Suzuki Samurai, La Otra. This content ranges from how to videos, DIYs, product reviews, diagnosing and repairs, as well as varying levels of fabrication. The main focus of this channel is to entertain, educate ( me as much as you), and most importantly have fun. If you enjoy fabrication, automotive modifications, and being entertained, then SUBSCRIBE to the channel to stay up to date on what I've got going on in the shop. So with that all said welcome to the channel.
Email: ELKMotorsports1@gmail.com
/ elkmotorsports1
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, ELK Motorsports receive a small commission at no extra charge to you. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
Channel Sponsors:
Zuks Offroad
Camp Verde, AZ 86322
(928) 567-3061
ZuksOffroad.com
/ zorproducts
Pro Stickers
5488 S Padre Island Dr
Corpus Christi, TX 78411
(361) 452-2840
/ emblemoverlays
You the man Trey. Ready to see what you do it next.
You and me both. Maybe even do a poll on what to do. I like involving the community in the builds.
Same with my old '91. Found piston skirt on an oil change. No symptoms, no other damage. New piston and 50k more miles with no issue.
That's what I'm going to do.
You make a lot of very good videos that are helpful to all of us - do not forget to drive yourself. Best regards, ALF
Thanks for the support, and I won't.
great video,i will be rebuilding mine over the next winter
Well hope this video helps, 🔧⏰
If I'm not mistaken, this is probably one of the most detailed video series on samurai mods ( if not the most detailed )
Kaiyes Ansary thank you so much for the complement!
Cool Video man keep up the good work!
Thank You, and I will try.
Great vid!! I have low compression on my two center cylinders so I'm leaning towards head gasket. Do you recommend getting the head milled or just clean it up and reinstall?
ezzyeggy, when you take you're cylinder head to the machine shop, you can ask them to check it for you. It only takes a min or two for them to check out out for you. My machine shop checked it for me and told me it was all good.
What carburetor are you running on that thing?
please post it soon! i wan to rebiuld my 94 im not shure what i may find so this would be helpfull on how to rebiuld it !!!
You got it
Any videos or advice on wiring up oval tail lights?
I installed and wired up my own brake lights with integrated reverse lights. And the tail light portion went from a 4 wire setup to a 3 wire setup.
ELK Motorsports lol yeah that was my problem everyone on forums are saying they used a trailer box? And I was just gonna hard wire them together my problem is there are four of them on a zor back bumper and they’re led finally got my front bumper on as well!
lol I used a trailer box too. i don't see any way around it. At least that is my experience on the subject.
Please..how to rebuild distributor to spark plug,and setting samurai...
That metal looks like it wasn't broken out per se, but rather melted out. that web is a very thin section of the piston crown and will be prone to getting hot spots. it was probably detonating because of that hot spot, and as a result beating the piss out of already soft metal as well as heating it more. Its not a chunk floating around somewhere, but just fine aluminum sand. what did your wideband look like under WOT?
The wide band looked good, just prior to the turbo, I had a stock radiator that was clogged. The temp gauge always read 210°F, and the stock Sammy is supposed tio run at 180°F
Hey Bro how are you, congrats GREAT CHANEL. I got a question, how many rows oil cooler are you running?
JOSE BOLANOS I haven't forgotten about you bud, mine is a 15 row Derale brand cooler, and I'm using the derale cooler mounting brackets. I'll get you those demensions too.
the Suzuki 1.6 G16A 8 valve cylinder head is compatible with the G13A engine block
ask myron he will no lol looks like ya got lucky in one way it could have did monster damage. got my decals luv them cant wait to rock them on my zuk when i get it back soon.
Yeah it was very lucky. And thanks for getting the decals. I'm got them on everything too, lol
Really wanna see where that metal piece is hiding....the plot thickens....PEACE!... (of metal)
Richard Singh yes, where did it go. I dropped the oil pan and nothing. No metal shavings, no pieces of piston, nothing
Why do people think they have to play music in every video, can’t we just hear you talk
To lean