My Deutz starter looks just about the same--I'll go back after it. Thanks. I've only done a few automotive starters before and they were a bit easier to disassemble.
@@TinC33 Ščetke so v redu, ugotovil pa sem, da bo treba kupiti nov avtomat zaganjača (elektromagnet), ker je mrtev. je bil pa hec, da je zadnji del zaganjača bil dodatno pritrjen na traktor še z enim okovjem. Precej nerodna zadeva za odmontirat.
Thanks, yes this tractor start almost every day some day even 10 times and more, starter work until few weaks ago, problem was that brushes were wearn out because i didn't change them while making this video, after brush replace again work like new.
Thanks isidoro, now i buy an mini excavator and i repair it for entire month almost all days, I'm sorry I did not even shoot everything, because I really did a lot of things
Nice video. I'll try to do the same. In my case, the solenoid doesn't move. When i move with my hand until the end it jus stays there and when i cuts of the current games back in. Do you think it's solenoid? There is a liquid to clean everything?
Sure, you can dissasemble all together, and clean everything with a gasoline and brush or something. Than with find sandpaper sand all the contact and assemble back together, i'm preatty sure that there is just some bad contact somewhere, otherwise the selenoid is dead, you can measure them with a multimeter. Check also the brush, if needed buy new for a few $
Be careful filling on the brush housing. It limits the brush wear to a certain point. Beyond that point the copper wires may become exposed and arc and damage the armature.
preatty much the same, on alternator, check if the brushes and rotor are ok, than there's also electronic regulator, that's all three stuff wich can fail.
nice easy job and well explained.......i love the way you gave the carbon brushes a few more years of use......
Excellent presentation, real world working conditions too.
Best starter video EVER !
You a very good mechanic with machining abilities as well. Rare combination
ATB
aRM
My Deutz starter looks just about the same--I'll go back after it. Thanks. I've only done a few automotive starters before and they were a bit easier to disassemble.
Ej, hvala za tale video! Imam podoben problem in se ga bom sedajle končno spravil reševat, ker mi bo lažje zaradi tvojega nazornega videa!
Kar korajžno nimaš kaj falit vendra menjaj še ščetke, niso drage ampak sam nisem mel pri roki tak da me se caka
@@TinC33 Ščetke so v redu, ugotovil pa sem, da bo treba kupiti nov avtomat zaganjača (elektromagnet), ker je mrtev. je bil pa hec, da je zadnji del zaganjača bil dodatno pritrjen na traktor še z enim okovjem. Precej nerodna zadeva za odmontirat.
@@mitjasersen9779 preveri da je prispajkana žica na ohišje in na tisti jeziček kjer je kabel za aktivacijo gor priklopljen
Thank you sir. I learn much from you. God bless!
PacoWang thank you for that comment
Very good job.
you're a very smart guy!
thank you.
Not so smart, just got some hand knowledge becuause born and rise on a small farm 😉 thanks
Looks like the starter for my old Mercedes diesel.....I think this will work and probably is gonna save me $140, sweeeet
The enjoyment of a DIY Repair and saving $140 is a good thing!
Good luck, hope all goes well.
RL Buffalo, NY
Thanks, yes this tractor start almost every day some day even 10 times and more, starter work until few weaks ago, problem was that brushes were wearn out because i didn't change them while making this video, after brush replace again work like new.
cool repair! you have so many abilities
Thanks isidoro, now i buy an mini excavator and i repair it for entire month almost all days, I'm sorry I did not even shoot everything, because I really did a lot of things
it's ok, no worries, I'm here because I like to see people using tools and doing mechanical and electronic stuff, keep it coming
Thank you.
Very good video, tnx..
Hvala
Dubr si Tinc! Jest ga se razstavt nebi znav, pustmo de bi stvar se kdaj vzgala pol :) Dubr video, super za paglidat!
Tine Mazgon hvala, se ni taku sam latit se je triba ;-)
Nice video. I'll try to do the same. In my case, the solenoid doesn't move. When i move with my hand until the end it jus stays there and when i cuts of the current games back in. Do you think it's solenoid? There is a liquid to clean everything?
Sure, you can dissasemble all together, and clean everything with a gasoline and brush or something. Than with find sandpaper sand all the contact and assemble back together, i'm preatty sure that there is just some bad contact somewhere, otherwise the selenoid is dead, you can measure them with a multimeter.
Check also the brush, if needed buy new for a few $
Nicely repair very very good
v nice job
Explain abt stocker car
Be careful filling on the brush housing. It limits the brush wear to a certain point. Beyond that point the copper wires may become exposed and arc and damage the armature.
bhai agar koi sa saman lena ho to riplay karo mera self ka kam hai new saman melta he bro koi sa saman ho
Sir kon sa self hai
sorry but also google translate can't help me, can you write in english?
Mico self hai na sir
कहा से हो bro
Tractor ka alternator Kaise repair kaise karte hain
preatty much the same, on alternator, check if the brushes and rotor are ok, than there's also electronic regulator, that's all three stuff wich can fail.
good job
Thanks, it's still work, and use it almost every day
g
@@gulabkeerio1930 your a good mechanic "old school" fix not replace thanks for the good video
Too easy, I should’ve done this 4 months ago