CJ's 700+HP VP44 Cummins
Вставка
- Опубліковано 6 лип 2020
- Learn more about our product
pureflowairdog.com/
877-421-3187
Fresh Balanced and Blueprinted
12v shot peened and polish rods
Polished crank
ARP main studs and rod bolts
Mahle flat top Fly cut pistons
Fluidampner
Stage 5 Colt cam W/ retainer
Ported Head 3 angle head job
D&J intake shelf
Oring head
Hamilton #110 valve springs
Hamilton extreme duty push rods
ARP 625s
6x.013’s
.084 lines and .093 crossover tubes
Stage 2 Scheid VP
Quadzilla V2 (with 1badvp44 tunes)
Steed Speed
64/73/.83 T4 wastegated
CC81028 Moog Springs (halfton springs but order specific part number there is multiple)
No rear block
Rancho RS7262 Rear Shocks
Rancho RS7370 Front Shocks (Requires shock tower deletes) - Авто та транспорт
Sweet truck man, the horsepower it makes is crazy!😱🤙🏼💯
Love this truck it’s so clean 💯
That’s one badass basic build 😉🤘🏻🚂
What a clean truck 👍
Me gusta tu Cummins !!! Esta hermosa !!! Good job !!
This thing gives me serious hope for my build haha I'm going to have to Dyno it once it's all back together
Vp truck goals
Super nice truck
Super basic but clean as hell. That thing is badass. What head unit is in the truck looks sweet.
Where did you get your shifter mount from? I love how it comes through where the boot was!
Sick truck bro!!.. Aloha 🤙🏽
@schmbrt96 how is the drivability and idle quality of the scheid lightning VP vs a regular standard output?
Sweet clean truck man .keep up good work man 👍👍sounds good..whats song at end got a good beat to it 👍👍
How much did the stage 2 Scheid pump run you? If you don’t mind me asking. I know you have to call to order one
Where u get your screen from ?? Nice build 😍🙌🏽
Sick truck!! From where did u get that hood from?
What color is that? Looks awesome!!
How does the scheid pump work with the quad, I've heard nothing but good things about 1badvp44
Fantastic I push 800 with 6x15 scheids pump and Quadzilla
Where do I get a t4 turbo, I can’t seem to find one for second gens .
How much boost was it pushing?
What a nasty looking truck😍
What kind of touch screen is on the dash of the truck?
Who did he get the shot peened rods from?
What color did you repaint the truck?
Where's the link to the part # for the front halfton coils I wanna know how low it really is and what all needed to be done to get it to sit that low...
Part numbers in description
Fuckin mint bro
what are 6x.013 compared to in hp
So question for you. On my 02 manual truck, what is needed to turn 4k rpm? Springs, push rods, injectors of course. But on the rev limiter side what will allow it to fuel that far?
Get a quadzlla tuner and set the limiter to 3600 and let her eat
Deque año es ede color? Oh que tono lo encuentro en Monterrey
I like the tablet mounted in the dash. Whered you find that setup?
Look up monitor mounts. I have mine on the pillar.
Cj How do I get ahold of you I want to do something like that With my truck And I have questions to ask
Beautiful truck. 2nd gen diesels are the best
Beautiful motor shit truck
@@megej2600 best selling dodge truck,best looking body,haters like you going to hate it makes it even better
@@josiahjones5293 nah there junk stop lying to your self. Looks is just a opinion not hating just saying
@@josiahjones5293 I own a 2nd gen lmao… they look amazing but the body’s are shit… you can’t argue with that
Do you have a link to the front bumper?
2017 2500 front bumper with brackets from eBay
Fire ringed ????
What hood is that? By chance do you have a part number?
Not sure of part number, you can get it from summit racing
Who built the turbo that is a perfect turbo setup for a vp truck ?
It’s just a super core that I purchased exhaust housing separately, but it came from Scheid.
What’s the tire and wheel setup?
22x12 hostile sprockets with 305/40/22 nitto 420s
is this fuel only? i just see that that turbo set up seems kinda small for 781 hp and I'm just curious. I have a 2006 and it needs a turbo after I do fueling and I am just curious if it was all fuel to get that 781 hp
Fuel only, was looking at data of the pull the other day and it was 45 pounds, but I assume the head flow is helping lower boost pressures.
@@schmbrt96 I'm just so amazed that the 64/73 that you are running put that power down. that's awesome.
@@schmbrt96 so you bet it would have made more power with a s467?
I just need to get a spring gate installed on my 364 and set it around 55 or so. It’s possible that it would make more power on the 467, but it drives great and I don’t wanna lose that drivability.
@@schmbrt96 so right now you are limiting peak power because of too high exhaust manifold pressure?
Did you sell the 6speed transmission?
It’s been sold already
What seats you got in that truck?
Had them custom made local
Where’s your trans cooler mounted?
underside of bed
If I went to around 750 horse would a stock 5 speed manual hold up or what would be the best bet
I had a KY Dual Disk 3850 Clutch, Billet Input shaft, South bend hydraulic’s and made 780
Daily driven as well
Not long. Personally not a fan of a nv4500 over 600hp. Went through about 5 in a buddy’s truck before he sold it.
What size of tires it does have ?
305/40r22
Needs bigger sticksss
I’m new to this game , How much would it cost to make a basic build ?
Probably 10-12k or so for motor setup.
No such thing as a basic build I came in only wanting to spend 10k and I’m more than double into my truck now
I'm from southern Indiana, where are y'all located? I'd like to see the truck and ask some pointers. I gotta 02 and really need good info on how to get more than 500hp. A lot of people have told me it's almost impossible with a vp44 cummins
Not impossible. Work over the head. Scheid pump. Big sticks. Quadzilla. 64.5 turbo. or twins 362/472
@@ridenorthwest1687 thanks for the tips man. Appreciate it.
@@lonewolf24v61 I'm gunna tell ya right now. If you want to daily drive your truck shoot for a clean 450hp. It will save you a lot of time and money. I made 466/927 on a loaded dyno with my 01 and I wouldnt really change a thing about it.
125 sticks
62/65/12
quadzilla
sovp
bunch of supporting mods
Also.. if your truck is a 47re. Your first upgrade should be a built trans and a fass165.
@@ridenorthwest1687 it's the nv4500 5spd
How much did you pay for engine and performance mods
Hard to estimate at this point, but it’s not a very cheap build truly.
20k
No a/c?
It’s on the list lol
and they doubt the 24v’s
All they doubt is the stock lift pump and the injection pump. And even then it’s the lift pump more than anything.
@@Kyle_Godfrey111 right, come a long way since I made this comment had just got my first 24v but now I have an almost 450hp set up for pretty cheap and they arent even super special parts. i didnt think the vp's were all the capable before i owned one.
The VP hold up?@@hreindustries
Gosh I can remember if you had little over 300 hp you was okay....now everyone wants 500 900 or a 1000 hp ....😲
You cool unless its 1k
Why does every one upgrade their vp44 ? Most people cant out flow a s/o pump. Any one who is thinking about upgrading their VP44 get injectors and upgrade it when your VP cant support them. I have a Quad ,7665 over a s488 and 6x.022 injectors with a few mods on my vp to increase lift pump pressure. I have more fuel than air.
SOVP is only good for about 750hp, I have plans to go bigger in the future. Hoping to have compounds on it this weekend.
@@schmbrt96 I would challenge that . See the size injectors I have and my turbo sizes . I can over fuel my setup with a S/O pump. I have rpm issues not fuel.
Simple & basic....intake shelf cut, head worked & ported(hard telling what that cost), $2500-3k just for the injection pump, auto swap & build lol $$$$$
Yeahhh you right🤣🤣
Pshh. Nothing crazy. Just a super basic build. Lol!