Replace rear brake pads on a 9th generation Honda Civic (2012 - 2015)
Вставка
- Опубліковано 20 сер 2024
- I bought this used 2014 Honda Civic 1.8 EX with 130,000 miles.
I noticed the calipers a little rusted so I gave it a very good clean.
The internal pads were a little bit stuck and didn't move that freely.
I also applied PB blaster on the parking brake spring.
Front bracket bolts: 80 ft-lbs
Front sliding pin caliper bolts: 25 ft-lbs
Rear bracket bolts: 55 ft-lbs
Rear sliding pins: 17 ft-lbs
Check these other Civic videos:
Replace rear brake rotors: • Replace rear brake rot...
Transmission fluid: • CVT Transmission Fluid...
Coolant Drain and Fill: • Engine Coolant Drain a...
Clean MAF sensor: • Clean Mass Air Flow Se...
Clean MAP sensor: • Clean Manifold Absolut...
Replace PCV valve: • Replace PCV valve on a...
Replace cracked air intake hose: • Replace Cracked Air In...
Clean throttle body: • Clean Throttle Body on...
ATF plug popping out: • Automatic Transmission...
I like PowerStop brake pads! Did the front, time to do the rear.
I am the opposite 😂
I am doing the front today.
I flushed and renewed the brake fluid already. Easy process… video coming soon.
@@gotitdone I ordered the trans-fill-plug in your other video, from Amazon, only $8.69 .
Don't want to chance it popping out again!
I have been watching many of your videos.
Thanks!