Very well made video with sharp images and good lightning. Also you do a good quality mechanical job! I will replace my wheel bearing on my VW T5 next week, waiting for parts and tool kit now. Learned a lot from your video. Thank you!
Hi! Can i use this same tool kit even if my new hub comes with wheelstuds,or how would u press that kind of hub/bearing in? Do i have to remove the studs first to make it work? //Fredde
Please tell me wchich diameter of this special tool is suitable for Mitsubishi Colt VI/Smart For Four (2004, 2005 B.J) . I 'm asking because I see Mitsubishi description on Your work table! Thx!
If you dont remove the abs sensor before extracting the bearing the spacer you put at the rear of the hub will wipe it out as the bearing comes out.........just saying!.
I have a question When you change your bearing..do you need to change both sides or only the one side that is broken? Becausw i've heard from many people that you need to change both
Very well made video with sharp images and good lightning. Also you do a good quality mechanical job! I will replace my wheel bearing on my VW T5 next week, waiting for parts and tool kit now. Learned a lot from your video. Thank you!
Don't forget to remove the abs sensor before removing the bearing
Awesome - it explains very clearly the complete process - the camera angle are too good!
Wouldn't it be great if all car maintenance videos were as well made as this, I feel confident enough to tackle my Audi A2 wheel bearings now. Bravo!!
This special tool is for 78mm and the wheel bearing is 72 mm. This tool works ok even if the bearing is smaller?
Thanks for the good and clear video.
How deep does the bearing need to go in or does it stop by itself ?
Немцы вы самые лучшие Мастера в мире
Hi!
Can i use this same tool kit even if my new hub comes with wheelstuds,or how would u press that kind of hub/bearing in?
Do i have to remove the studs first to make it work?
//Fredde
Top video fantstic work awesome 👍
Did you have a plastic ring in your box? Does this ring need to be installed? Can you tell me its usefulness? by thanking you
great video
Please tell me wchich diameter of this special tool is suitable for Mitsubishi Colt VI/Smart For Four (2004, 2005 B.J) . I 'm asking because I see Mitsubishi description on Your work table! Thx!
Brilliant! Many thanks!
no music- works
hurra
grat
Excellent Video, I need to do this on my son's 6r Polo are they all 78mm and where did u get kit cheers sandy
Бик дан башкорттар алга, тюбалярова аулдан мин
❤
I'm thinking to buy that kit but I don't know if does work on vw polo from 2000 anyone here able to help? 6N2?
Cuál es el nombre de esta herramienta? Alguien me podría decir
Egy kis zsír azért jó lett volna a menetekre,csapágyra benyomás előtt.Amúgy jó video.
Great tutorial
Thank you!
You forgot to remove the ABS-sensor from the hub itself!
No, it was not needed
There is a cutout in the rear ring which clears the sensor (if the sensor is still in situ)
If you dont remove the abs sensor before extracting the bearing the spacer you put at the rear of the hub will wipe it out as the bearing comes out.........just saying!.
No, the kit is desiged so it clears the sensor, or atleast this kit is.
is it possible to take the wheel beasring off without the puller tool? for example using a screw driver and wedging it in at a angle?
no
You can remove it any destructive way, since you will throw it into trash anyway. I guess prying with a screwdriver will not work.
Awsome
Got a name or a link for that tool you used to remove the bearing.
Hej, har du delar att sälja? Söker lite till en cheva blazer 1990.
Looked like the pads were in the wrong way to me ?
I have a question
When you change your bearing..do you need to change both sides or only the one side that is broken? Becausw i've heard from many people that you need to change both
I only replace the broken one.
Hi very good a video, Could you sharing where to buy that tool kit?
❤💪🏻💪🏻💪🏻
Hi what the socket size to remove centre nut bearing?
36mm 16 points
36mm
Using non impact socket on an impact gun?
doesn't matter that much
Until it does when it shatters
It's better to use your muscles rather than impact gun. It's harder to destroy something.
Hola que medida de tubo es para la tuerca central
36mm
På ditt verktyg står det 78mm men när jag söker online verkar det som man ska anvönda ett som är 72mm, vad tror du är rätt? har också en 2015 polo
72mm, det jag använder är till Volvo, fick svarva om det för att det skulle passa.
@@justrandomcarsurbex3057 Tur att man hann läsa denna kommentar, var precis på väg till Biltema för att köpa 78:an...
@@GoodIdeasDontNeedForcejeg kjøpte 72 mm men det var feil til min polo 2003
So where can one purchase the tool kit u used??
It was bought local i Sweden
looks like tool is 78 mm and polo bearings are 72 mm, am i right? @@justrandomcarsurbex3057
Ebay ~£47
No torque values...???
Torque values please
@@janproovince 70 nm then 30 degrees on the drive shaft nut.
@@shaunc07 70nm on What Exactly?
Like you
Bearing size, brand & part number
Tja ! Du verka från Sverige! Vart kan man hyra sånt verktyg? Jag bor i Stockholm
Tragergelenk habt ihr vergessen
Brak smaru na Piasta.
Another mute video, why won’t people speak ?
Бик дан башкорттар алга, тюбалярова аулдан мин
Did you have a plastic ring in your box? Does this ring need to be installed? Can you tell me its usefulness? by thanking you
Sounds like the ABS ring, should be fitted onto the reverse side of the bearing (carefully)