Це відео не доступне.
Перепрошуємо.
How To Replace The Seat Cover On Your Personal Watercraft Jet Ski
Вставка
- Опубліковано 4 вер 2024
- Here we show how to replace the seat cover on a personal water craft, using a 2017 Sea Doo GTI SE130 jet ski as an example. Be sure to use stainless steel staples!
Seat covers can be found here: 3ftdeepsports.c...
Online Shop: 3ftdeepsports.c...
3ftDeep Branded Merchandise: teespring.com/...
Filmed with a Canon 70D camera in the great Pacific Northwest.
Music: Mission Dub, by TrackTribe.
Im waiting on my seat cover from Jettrim for my 2017 GTI. Thanks for the video.
If we can do it, you can do it.
Great video, as always!
Thanks!
Voy a cambiar el cover de mi YAMAHA fx cruiser en este invierno;gracias por el tutorial
De nada. ¡Buena suerte con tu proyecto!
Also be sure to use stainless staples. Standard staples will rust out in no time.
Thanks for pointing that out!
Great video! What length stainless staples did you use?
That is a great question. We used quarter inch stainless steel staples, but it really is a delicate balancing act. We found it very difficult to get the staples into the plastic seat properly; too much pressure and the staples blasted through the vinyl seat. Too little pressure and it wouldn’t go in far enough. It worked much better on softer plastic motorcycle seats,. If you can find slightly narrower and thinner staples that is a better way to go as they will penetrate the plastic seat pan easier. Definitely a pneumatic stapler works better. Good luck!
Great video. Thanks
Nice, the thought of pulling off the stretched vinyl is a little daunting. Anyone been able to replace the seat latch at the rear without removing the trim. Looks like the bolts come from inside?? Initially I thought they were just rivets and ground them out. Thinking I’ll use a couple of rivnuts.
The latch is usually riveted on and normally not removed when replacing the seat cover. The vinyl is not stretched too much, so I wouldn’t worry about that. It's getting it centred so that it sits correctly that is one of the most important part. Going slowly and having a second person help is the key! Good luck.
What kind of staples did you use? 18 gauge 1/4" stainless?
I find that 1/4" Arrow stainless work best. I also find that for my staple gun I need to use 95 PSI. Any less and the staples won't go in far enough; any more and the staples tear through the vinyl. Good luck.
Thank you for your quick response and for the excellent video!!!!
Just ordered mine! nervous, but will try to do myself
You can do it! If you need to adjust or tighten a bit more, don’t be afraid to pull out some staples and do it again. Good luck.
How did it go? Im doing 4 of my skis myself this week too.😊
@@richiee.2203 It went well!
Looks great!
Thanks, we're very happy with how it turned out.
Nice job
With the bag between the seat and the cover, does the bag produce noise when being used. thanks, great video.
Good question. That was my primary concern, but it doesn't make any noticeable sound. I recommend using the thickest bag possible. Good luck.
@@3ftDeepChannel now why is the bag necessary exactly since the original one did not have one? Thanks
Very good question. The manufacturer suggests using the bag. In fact they suggest using a thick bag. I assume it gives it ultra waterproofing that isn’t there with the original cover. For sure, my original seat cover would let water in so the foam cushion would get wet. This seems to stay very dry.
That's amazing that it took only 4 minutes and 19 seconds to replace that seat!
With the magic of video…
Can you do a video about getting stains out of the seadoo vinyl seats. My wife wore a pair of black shorts on my brand new 21 spark 3 up and stained the orange crush seat with dye from the shorts.
We can’t make a video on the subject because we don’t have the solution. A friend of one of our daughters wore a black bikini and stained the white seat. We could never get it out no matter how many products we tried …and we tried lots. Sorry.
@@3ftDeepChannel Thanks for responding. All good. I almost got it out with pure Acetone. Almost. Just figured there were better ways.
Keep up the great content and again good to see a fellow BC resident creating content. Thanks for all your hard work.
Thanks, Markus!
From what i heard the best is mildew spray bright star i believe. But may not remove it all. Best bet is replace cover.
Great video again, I’ve recovered one or two seats but never put a plastic cover on first? Interesting.. cheers 🥂
Yes, it's recommended by the manufacturer. We debated whether we should do it, but are glad we did. Thanks for your comment.
I have a question. Whats the plastic bags purpose? I have jet skis that had seats redone i went to look and they dont have plastic.
It’s meant to serve as a barrier to keep water out of the foam of the seat.
@@3ftDeepChannel ok ty
Keeps moisture in & grows mold
@@richiee.2203
I have a 2010 rxt 260 rebuilt motor new computer rebuilt supercharged won't run but 45 on water under pressure on the trailer get ribs up to about six seven thousand RPMs any ideas what could be the problem
What compression do you have? Any codes?
Many thanks for your video. Gave me the courage to do this myself.
My 2012 GTI 155 LTD had velcro pieces where the anchor tabs are inserted as seen in this video: ua-cam.com/video/DiAJsx_ZBfM/v-deo.htmlsi=Ir8HqLz7B2cKI9sV&t=252
I imagine that was to provide a bit more grip in addition to the anchor tabs.
I assume the plastic is too prevent water from getting into the seat?
Yes. To prevent water getting into the foam.
how do i disconnect my seat
great video btw
There should be a lever at the very back of your seat. Press this lever and the seat will release, if you have this type of machine.
What staple gun and staple T50/1/4" round or flat ? I seeing rust on staple after people replace OEM seat.
We used a cheap Arrow T50 staple gun with 1/4 inch staples The only criteria for doing this properly is that you use a pneumatic staple gun (we set ours to 90 PSI) and stainless steel staples. It takes some practice to get used to your staple gun, as there is a “sweet spot” where you get just the right penetration without going right through the vinyl.
@@3ftDeepChannel any better option will you recommend? I notice the OEM staple is wider.
Not really. We’ve done a number of seats with that staple gun (including two motorcycle seats), and it works okay. Interesting though that sometimes the OEM staples are wider, and sometimes they’re narrower. One thing that’s consistent though is that they’re usually thinner and a bit longer. We think those are the professional grade staples for professional staplers. The Arrow one gets the job done.
3ftDeep, what type stapler are you using?
Looks like the t50 stapler by arrow. Same one I got. Run about $30 at lowes
Yes, it is. And you get what you pay for…
Hello, what size of staple do I need? width and depth? thank you
We used 1/4” long staples. The width will depend on what type of staple gun you have, but it needs to be pneumatic for best results. Also, for outdoor use always use stainless steel. Good luck.
@@3ftDeepChannel okay 1/4 inch? I haven't bought the stapler yet. What width do you recommend? thank you
Hello Damien, We use this one and it's OK amzn.to/34Mt5KX, but you could also consider spending a bit more for a better quality unit like this one amzn.to/3gZqEqE. The first one uses T50 staples, which are very common but I'm not sure what the second one uses.
@@3ftDeepChannelThanks very much !!
No new strap ? ;-)
Nope. It doesn't come with one. Probably because it's a hassle for most to rivet it on, and very few people actually use it (in our experience, anyways).
What psi?
My stapler works best at 95 PSI.
omg 700 hours !!
Actually, that was a typo. It should say "900 hours".
Where can we get those seats?
Seat covers can be found here: 3ftdeepsports.com/store-parts-maintenance-seat-covers/