Hi, i have the same head unit but unlike yours the latest firmware i found on kenwood websites is ver 2.01 for dpx u5120 model. So please tell me that your ver 2.3 is factory installed or you updated it by yourself ( If yes , then plz share the link or details if possible). Thanks
Yong Yuanfook Hi, there is a wire (Blue/Yellow) at the back of the head unit labeled as "Remote Cont" which goes into an adapter. You can buy an adapter that is specific to your car remote. By connecting that adapter to the OEM steering remote, you can use it. I haven't tried this yet cause my car doesn't have steering mounted audio controls, but I think this should work.Hope this helps! :)
The protect mode comes on when there's some short circuit, so check all of the wires and connections. Once done with that, press the small reset button on the head unit to take it out of the protect mode. Hope this helps!
Hi i CANNOT SWITCH TO OTHER FM LIKE FM 2, 3 4 etc,even after pressing band button as u said,might be some setting is changed,i even reset the system too,pls guide where i need to change settings?
Hey man, I have a question about this head unit model my button unit can not fuction as usuall the head unit is turn on but all the button can not use. Already try to take of the accu and push the reset button, but the problem is not fix . Thanks
Dedy Hermawan try disconnecting the power to the head unit by removing the connector at the back, if not - the button itself might be faulty which can only be fixed by taking the HU apart.
Hello, first you need to check whether the antenna is connected to the receiver using the connector provided at the back of the receiver. Then Select the source to tuner. Then using the track skip buttons (next and previous buttons) you can change the frequency of the radio. Once you are tuned to a specific frequency, press and hold the memory keys, those are 1,2,3,4,5,6 on your receiver or on the remote. That will store the tuned frequency to a channel. Hope this helps! please get back if your issue isn't solved.
hi dear can you please help i have recently installed kenwood dpx u5130 i am facing an issue when i turn on my receiver or switch on my car i need to do all the settings again, i have to turn off demo mode select usb every time and reset time again and bass level and all please help why it is so?
Sagar Khichi make sure that you have connected the main power cable to the battery and the other one to ignition switch cable. This problem happens when the battery is disconnected, so you just need to check your wiring. You can refer to the user manual for wiring instructions specific to your model.
Hello! Tonight I was listening to a CD and went to skip to the next track now all the buttons don't work!? It's like it's locked. This has happened once before and somehow by pressing random buttons I unlocked it but I don't remember what I did.Do you know how to fix this?
i am trying to connect my android device through usb but its not working my device and usb cable as well as music system all the three are in a working condition then also its showing no music found
my speakers got wet, now this headunit wont select tuner aux or usb! everything else on it works perfect, even after putting new speakers in still does the same thing
I'm sorry to hear that, please try resetting your head unit by pressing a small reset switch positioned in the bottom left corner of the head unit. Please let me know if this helps or not.
hi sir, i recently have the same problem like your HU. Still plays music but only the volume knob works, the other button didn't work at all. Did you find out how to fix it? thank you :)
Radhe Radhe मैं श्री धाम वृंदावन से मेरे पास इनोवा गाड़ी में यही सिस्टम है अगर एक कोई बटन दबा हुआ रह जाता है कब कोई भी बटन काम नहीं करेगा अतः उस को आगे का बोर्ड खोल के बटन साफ करो मेरे कांटेक्ट नंबर 9828184334
Function of DPX-U5120/ DPX-MP3120 Clock Adjustment. You can adjust the clock and date.1 Enter Clock adjustment mode Press the [B.BOOST] button for at least 1 second.The hour display blinks.2 Adjust the hour, Turn the [VOL] knob to adjust the hour, and then press the [VOL] knob.The minute display blinks.3 Adjust the minute Turn the [VOL] knob to adjust the minute, and then press the [VOL] knob.Finish the Clock Adjustment.
Ankit Verma I'll send you the link for user manual, there is an option to turn the aux on and off, just follow the steps and it should solve the problem.
There's a small reset button located on the front of the head unit, use something like a pen or a needle to push it and that should reset your head unit.
Hi, please check all the wiring and then press the RESET button located at the bottom left of the head unit. You'll need a sharp object like a pen to press the RESET button. Hope this helps!
chetan mangaonkar there’s a small reset button on the bottom left, it may change depending on which model you have, just press that reset switch and the system should reset itself. Hope this helps!
prasad patil thanks for the prompt reply..I have the same model which is shown in the video.. I have tried resetting it but hasn't worked for me..this has happened on pressing fwd keys..Any solution..??
Ramsha Shaikh it might be due to a faulty aux cable, the cable is stereo that is one of the channel is left and the other one is right, try changing the cable. Hope it solves your problem.
In my system it is written over their word called "PROTECT"..and nothing working..what's the meaning of it
Hi, i have the same head unit but unlike yours the latest firmware i found on kenwood websites is ver 2.01 for dpx u5120 model. So please tell me that your ver 2.3 is factory installed or you updated it by yourself ( If yes , then plz share the link or details if possible).
Thanks
hi nice review, i really liked it but i wonder, can there be no clock display at all? thank you
yes, you can do that by setting the clock to off in display off mode under the display settings, hope this helps! :)
I have same set. But prob is front panel is stuck. How can I fix it
Hello, can you please help me get my sterro out of the store showing mode.
thanks a lot for review buddy!! :) Cheers!!
Happy to help you! Hope you have seen both the parts of the review! :)
I would like to know, this unit able to connect oem car remote steering control?
+Yong Yuanfook you get a remote control with the remote. I doubt any other remote will work with it.
Yong Yuanfook Hi, there is a wire (Blue/Yellow) at the back of the head unit labeled as "Remote Cont" which goes into an adapter. You can buy an adapter that is specific to your car remote. By connecting that adapter to the OEM steering remote, you can use it. I haven't tried this yet cause my car doesn't have steering mounted audio controls, but I think this should work.Hope this helps! :)
+prasad patil thank you very much. I will try it.
Apart from volume none of the options working. Kindly let me know how to fix it
How to unlock this audio bro?
dude how to fix the stereo when it displays p protect on the screen
The protect mode comes on when there's some short circuit, so check all of the wires and connections. Once done with that, press the small reset button on the head unit to take it out of the protect mode. Hope this helps!
Hi i CANNOT SWITCH TO OTHER FM LIKE FM 2, 3 4 etc,even after pressing band button as u said,might be some setting is changed,i even reset the system too,pls guide where i need to change settings?
hello , i can not change standby mode if i press the volume knob is shows only standby does not show function , any solution?
Sir my kenword music system any button not work what can i do
I am also facing the same problem. Please help to resolve the issue
ua-cam.com/users/shorts2jjELEPtM6g?feature=share
Bhai mere receiver me koi bhi buttons kam nahi kar rahe hai . Sirf volume increase and decrease hota hai kya problem hoga
ua-cam.com/users/shorts2jjELEPtM6g?feature=share
Hey man, I have a question about this head unit model my button unit can not fuction as usuall the head unit is turn on but all the button can not use. Already try to take of the accu and push the reset button, but the problem is not fix . Thanks
Dedy Hermawan try disconnecting the power to the head unit by removing the connector at the back, if not - the button itself might be faulty which can only be fixed by taking the HU apart.
ua-cam.com/users/shorts2jjELEPtM6g?feature=share
Hye. Can u teach how to set a tuner. I try follow the manual but it seems to teach half way. I really appreciate if u show how to do it. Thanks
Hello, first you need to check whether the antenna is connected to the receiver using the connector provided at the back of the receiver. Then Select the source to tuner. Then using the track skip buttons (next and previous buttons) you can change the frequency of the radio. Once you are tuned to a specific frequency, press and hold the memory keys, those are 1,2,3,4,5,6 on your receiver or on the remote. That will store the tuned frequency to a channel. Hope this helps! please get back if your issue isn't solved.
Same my head unit toyota avanza in the Philippines sounds 🔊 is awesome
I have same set. But the problm is front panel doesn't work. Only lights working. Nothing press any button. Can u help. Explane
ua-cam.com/users/shorts2jjELEPtM6g?feature=share
hi dear can you please help i have recently installed kenwood dpx u5130 i am facing an issue when i turn on my receiver or switch on my car i need to do all the settings again, i have to turn off demo mode select usb every time and reset time again and bass level and all please help why it is so?
Sagar Khichi make sure that you have connected the main power cable to the battery and the other one to ignition switch cable. This problem happens when the battery is disconnected, so you just need to check your wiring.
You can refer to the user manual for wiring instructions specific to your model.
Dear Sir please tell how can I receive and call from mobile without taking phone in hand i.e while driving
How do you set the time on the ken wood deck
on this particular model, you can do that by pressing and holding the bass boost button for a few seconds when in "Standby" mode... hope this helps..
@@prasadpatil92 thanks alot bro you solved my problem of clock setting...
Pleasure! please subscribe to the channel! It helps me a lot!
Hello! Tonight I was listening to a CD and went to skip to the next track now all the buttons don't work!? It's like it's locked. This has happened once before and somehow by pressing random buttons I unlocked it but I don't remember what I did.Do you know how to fix this?
I should mention the remote works to control the unit still
Milly Jay Hello, you can try re-setting the head unit by pressing a small button located below the USB/ AUX ports. I hope this will solve the problem.
Please tell me how to fix this. I have the same problem..
Had the same problem...can someone help me??
How to fix it .I have same problem
Had same.. but my keys are not functioning... can you help pls? 😫😫😫
Please try resetting the unit.
Thanks a lot
Bro my this tap not working a single button what to do
Bhai standby dikha rha h ab song nhi chal rhe
i am trying to connect my android device through usb but its not working my device and usb cable as well as music system all the three are in a working condition then also its showing no music found
Hi, please make sure that your device is connected in mass storage mode in the USB settings.
my speakers got wet, now this headunit wont select tuner aux or usb! everything else on it works perfect, even after putting new speakers in still does the same thing
ohhh... that's sad... did you try resetting the head unit?
Sir sstems mp3 next nahi ho Raha hai kuch seting batao
i have a problem in that stereo suddenly the buttons not working only the volume is working if you have any solution please help me
I'm sorry to hear that, please try resetting your head unit by pressing a small reset switch positioned in the bottom left corner of the head unit. Please let me know if this helps or not.
+prasad patil had the same problem and resetting won't help anything. any solution?
+Braham Bram sorry bro, only service center guys might help you...
hi sir, i recently have the same problem like your HU. Still plays music but only the volume knob works, the other button didn't work at all. Did you find out how to fix it? thank you :)
Did you try resetting the head unit?
How to remove standby
Music system is stucked on standby
Bhai mera msc systm kam nhi kr rha ha uska sttng bachho k karn gdbd ho gya ha plz help me
Hlo sir ,sir plz help mere kenwood sistem ka remot mispleas ho gya hai .Aur iska koi v butten kam nahi kar raha .remot ke bina Kase kam kare ga .
Gurwinder pannu hello, please try resetting your unit by pressing the reset button or disconnecting it from the battery
prasad patil sir ok thanks me moring try karaga
Radhe Radhe मैं श्री धाम वृंदावन से मेरे पास इनोवा गाड़ी में यही सिस्टम है अगर एक कोई बटन दबा हुआ रह जाता है कब कोई भी बटन काम नहीं करेगा अतः उस को आगे का बोर्ड खोल के बटन साफ करो मेरे कांटेक्ट नंबर 9828184334
Switch's not working
ua-cam.com/users/shorts2jjELEPtM6g?feature=share
Plz tell me clock setting, how to set clock time
Press and hold bass boost button when in standby mode
How to remove the standby mode?
Demi God same problem
Anyone that could help with video?
Can someone help please my buttons stopped working.
FM and all switches not work except volume button
Spray WD 40 or any other electric contact cleaner on the unit especially over the buttons and turn on after spray has dried. Worked for me
Please help because my Kenwood like that says PROTECT
Try resetting the head unit and if not done, check the wiring for any short circuit.
can you please tell how to adjust time and date.
Hi, this one doesn't have the date function, you can adjust the time by holding down the bass boost button. Hope this helps!
Function of DPX-U5120/ DPX-MP3120 Clock Adjustment. You can adjust the clock and date.1 Enter Clock adjustment mode Press the [B.BOOST] button for at least 1 second.The hour display blinks.2 Adjust the hour, Turn the [VOL] knob to adjust the hour, and then press the [VOL] knob.The minute display blinks.3 Adjust the minute Turn the [VOL] knob to adjust the minute, and then press the [VOL] knob.Finish the Clock Adjustment.
Keypad lock kya problem rahega
hello, bhai jb me apni AUX esne lagata hu to ye baar baar disconnect ho jati h , eske leye keya karna chaye?
Ankit Verma bhai aap ke paas user manual hai?
no sir, 2nd car me laga hua aaya tha
Ankit Verma model number kya hai?
DPX-U5120 ye h sir
Ankit Verma I'll send you the link for user manual, there is an option to turn the aux on and off, just follow the steps and it should solve the problem.
how to remove protect
Protect mode aa gaya kaise khole
How do I change the time on it
don jon press and hold bass boost switch
Ok gonna try
Awwww man thanks alot bro
Yeh satrr nhi hor rha
hi, how do I connect via Bluetooth?
Jay R 15 hi, this particular model doesn't have Bluetooth, you can purchase a Bluetooth adapter and connect it externally, hope this helps!
prasad patil it does help. I've had this unit for a few years now, guess I was reading it wrong
How to set time?
ravi patel press and hold the bass boost button while in standby mode
@@prasadpatil92 ok got it thanks
Bro buttons are not working
Spray WD 40 or any other electric contact cleaner on yhe unit over the buttons especially and let it dry and then turn on. Worked for me.
Only router dial is working for volume rest not working
my radio is luck who have and ideas I lost my book let I need help
Poteting mode
how to reset the settings of dpx 5120
There's a small reset button located on the front of the head unit, use something like a pen or a needle to push it and that should reset your head unit.
Dude how to remove the PROTECT MODE... U have made such a long video but not shown how to remove the PROTECT mode
Hi, please check all the wiring and then press the RESET button located at the bottom left of the head unit. You'll need a sharp object like a pen to press the RESET button. Hope this helps!
@@prasadpatil92 sir
Your contact number
Dimirrrrrrrrr,dimmirrrrrrr, manyual brighterrrrr,sucks
My Kenwood double din music system has hung. Need help to restart the system
chetan mangaonkar there’s a small reset button on the bottom left, it may change depending on which model you have, just press that reset switch and the system should reset itself. Hope this helps!
prasad patil thanks for the prompt reply..I have the same model which is shown in the video.. I have tried resetting it but hasn't worked for me..this has happened on pressing fwd keys..Any solution..??
chetan mangaonkar can you try removing the fuse at the back of the head unit? That will disconnect the power supply. That might help.
@@prasadpatil92 sir
Sir mere music system me protected bs show kr rha kya kare plz reply me
How to unlock it when goes protect mode
When I use Aux option in car only one side speaker is work why this is so???
Ramsha Shaikh it might be due to a faulty aux cable, the cable is stereo that is one of the channel is left and the other one is right, try changing the cable. Hope it solves your problem.
How to unlock it when goes protect mode