This is important for my project, I just want to know if the tracks that you used on this model will be rigid enough to deal with a little larger amount of weight, like the zig-zag stuff beneath the thin layer of the cardboard at 2:24, whether they will be "squashed" under high pressure, and hence the tank will be ruined and it won't be able to move anymore. Also, I want to know if they won't tear apart like when they are moving with the wheels, since you fixed the two ends with some sort of glue or something, I was wondering if they would just tear and the tracks will be destroyed. Hope you will reply, and thanks for this cool video!
If you want to use cardboard... you're better off converting cardboard to the much stronger variant. First, you need a blender, cardboard, water, and a mold. (unsure if the glue in between some cardboard will cause a problem) Second, you need to soak the cardboard and process it in the blender... a goop is about the consistency I would go for. Third, you would need to empty the blender into the mold and compress it, unsure how you might speed up the drying process or how this step should properly be done; I recommend looking online if you have any questions. lastly, after a few days, it should be dry and maintain its shape with a hardness near to MDF or whatnot. Basically, you need two parts of a mold to compress it to a certain thickness, if you can maintain a constant height across the piece then you could probably use 2 flat tiles, but I would expect better results from using a frame. The goop will compress to extremely small thicknesses, and when dry, will remain at that thickness and be far more durable than regular cardboard. I first saw the process in a UA-cam video where a person compressed a few boxes or so into a small mold for a DIY Bluetooth speaker... the resulting material was rather hard and able to be drilled into while maintaining its shape.
@@sergeilushavenkhov You are welcome. Figure it would also increase its overall durability, and with a bit of watertight sealing like with an oil coat (forget the actual name of the oil-like thing they coat cardboard with that is not epoxy), it should be a toy you can enjoy for a long while :D
If the wheels are rotating in only one direction then how is the tank going right or left? I mean it should be confined to forward and backward movement.
There are 2 motors connected to each drive wheel. When you are pressing the buttons to go left or right on the controller, then the motors work individually.. Like if you are pressing left then the right motor is working or spinning the right drive wheel. Which is making the tank go left or rotate left. This is how actually tanks work.
I'm doing the same thing! but i am modifying an old italian toy called "orion 5" have you built yourself the electric circuit? or wher did you found it?
@@kevwulf5629 hey! yesterday i was building the tank it took me 1 hour to make it. the problem is my tank wont even run! The motors are too weak. my wheels are not circle but egg-shaped wheels.my bateries are the simple but cheap li-ion bateries. I need a much stronger motors and a heavy duty bateries. With a little more time and effort of cardboard and glue guns. My tank will soon run on our concrete floor.
Yo! so im trying to make a tank similar to this for a school project so could you please tell me the components you used in the video and if possible then the code you used as i can modify to fit my criteria.
if u attach some rubber on the tracks it will help on rough terrain and gives it more traction to climb up some steep terrain :D
Thank you for your opinion!
Thanks it helps me 😀😀😀
A cute but tough tank.Maybe you can puncture somebody’s car tire as a prank or revenge
Seriously this thing popped a ballon
8:45
the little tank was angry for not being able to kill the glass set..... hahahha
tooooo cute tank i have ever seen
This is important for my project, I just want to know if the tracks that you used on this model will be rigid enough to deal with a little larger amount of weight, like the zig-zag stuff beneath the thin layer of the cardboard at 2:24, whether they will be "squashed" under high pressure, and hence the tank will be ruined and it won't be able to move anymore. Also, I want to know if they won't tear apart like when they are moving with the wheels, since you fixed the two ends with some sort of glue or something, I was wondering if they would just tear and the tracks will be destroyed. Hope you will reply, and thanks for this cool video!
It's cardboard, just layers of paper
If you want to use cardboard... you're better off converting cardboard to the much stronger variant.
First, you need a blender, cardboard, water, and a mold. (unsure if the glue in between some cardboard will cause a problem)
Second, you need to soak the cardboard and process it in the blender... a goop is about the consistency I would go for.
Third, you would need to empty the blender into the mold and compress it, unsure how you might speed up the drying process or how this step should properly be done; I recommend looking online if you have any questions.
lastly, after a few days, it should be dry and maintain its shape with a hardness near to MDF or whatnot.
Basically, you need two parts of a mold to compress it to a certain thickness, if you can maintain a constant height across the piece then you could probably use 2 flat tiles, but I would expect better results from using a frame. The goop will compress to extremely small thicknesses, and when dry, will remain at that thickness and be far more durable than regular cardboard. I first saw the process in a UA-cam video where a person compressed a few boxes or so into a small mold for a DIY Bluetooth speaker... the resulting material was rather hard and able to be drilled into while maintaining its shape.
@@Suzuki_Hiakura Thanks for the advice fam, helps out a lot
@@sergeilushavenkhov You are welcome. Figure it would also increase its overall durability, and with a bit of watertight sealing like with an oil coat (forget the actual name of the oil-like thing they coat cardboard with that is not epoxy), it should be a toy you can enjoy for a long while :D
hey man, could you share blueprints and dimensions of each board? thank
bro it's not to have measurements because it's more for you to see the format and you already have an idea of how to do it
Tank's weakness the dredged water🤣🤣🤣👌
Quá đẹp🤩🤩👏👏 rất ủng hộ bạn những video như này tiếp tục phát huy bạn nhé
Nice video. It looks like a real tank
Nice working tank I wish I had make it
How do you control this tank and any other vehicles you made
You should give it a camouflage too... great video!!! Could you give measurements next time
Классно! Главное из подручных материалов. Я вот тоже делаю из подручных, только предпочитаю из дерева. Можешь посмотреть.
This is the most beautiful thing ive ever seen! Like it's impossible to make that with out this video thanks!
Love this new challenge for you add suspension
the tank is very nice
Bro can you tell which system you use two button car system or four
Very nice tank
If the wheels are rotating in only one direction then how is the tank going right or left? I mean it should be confined to forward and backward movement.
There are 2 motors connected to each drive wheel. When you are pressing the buttons to go left or right on the controller, then the motors work individually.. Like if you are pressing left then the right motor is working or spinning the right drive wheel. Which is making the tank go left or rotate left. This is how actually tanks work.
@@amitavabiswas5260 I get it now. Thanks a lot. 🙃
@@amitavabiswas5260 Thanks for the info, I am making a motorized tracked cardboard model of my own, hope this helps.
Wow! It's AMAZING😰😮
Great vid but I would suggest tightening the tracks.
X
nice video, mate!
i subscribed! :D
Very cool tank
খুব সুন্দর
You are a smart boy
Thanks
thanks!
Really cool tank! Very pretty as well! Thanks for upload!
Is it a one time fire mechanism, or can it be used multiple times?
Bác mua TX RX xịn quá. thích ghê...
strongest russian tank deployed in ukraine:
You actually swiped. This is strongest tank that Ukraine has 🎉💪💪💪💪🔥🔥🔥🔥🔥
You are true genius
Buddy
Awesome video man the tank is really great!
You are right
क्या टैंक बनाया है भाई
Thank you for this tutorial because our school challenge us that we will make our cardboard creations that can move
@D. DIY bạn làm bằng những mạch gì , pin gì với cái tay điều khiển nào vậy :v
I'm doing the same thing! but i am modifying an old italian toy called "orion 5" have you built yourself the electric circuit? or wher did you found it?
0:18 Việt Nam, Bạn Là Người Việt Nam
Hey, great craft, keep it up. But it'd be better if you added a material list in the description
YEP
Wawww aap kina acha bane te ho rc tank
Incredible video!
Fantastic job!
Bahut acha 😁😁👍
What transmitter and receiver was that??
Where to buy that
Bạn dùng keo dán sắt để dán luôn hả ?
QUESTION DID U JUST TOKK OF THE RC PARTSSS,I MEAN THAT GREEN STUFF
An you please give the blueprint of all the parts. Because I don't know what size should it be. Thanks
Hay quá 😄
hello, what are those yellow attachments with each tamiya motor?
It's a geared motor or a dynamo speed reducer
@@redjosefs.degamo4914 Thank you man! well appreciated! Cheers to tanks! Your tank has inspired me to build my own. :)
@@kevwulf5629 hey! yesterday i was building the tank it took me 1 hour to make it. the problem is my tank wont even run! The motors are too weak. my wheels are not circle but egg-shaped wheels.my bateries are the simple but cheap li-ion bateries. I need a much stronger motors and a heavy duty bateries. With a little more time and effort of cardboard and glue guns. My tank will soon run on our concrete floor.
@@redjosefs.degamo4914 We'll be awaiting your new creation, keep it up man! looking up to you and your ideas. :)
@@kevwulf5629 :)
Good tank
Hello , nice projec dude,
Where i can find the controller and receiver?
Thanks
Watch this video to learn more please!
ua-cam.com/video/ReMYMD6sjag/v-deo.html
Nice hard work
BRO WHAT REMOTE CONTROL DO YOU USE?! IS THAT HUINA? PLEASE TELL ME. THE EXACT AND DETAILED NAME OF IT :)
Được
Where can I find "engine" and battery? Thanks
Walmart
Watch this video to learn more please!
ua-cam.com/video/ReMYMD6sjag/v-deo.html
It's very nice
I subscribed you...
Awesome! Great job!
bro người việt nam đúng ko
Yo! so im trying to make a tank similar to this for a school project so could you please tell me the components you used in the video and if possible then the code you used as i can modify to fit my criteria.
Where can I found remote control and rectangle yellow thing
It's called ardruino mate ... ardruino gear motors
@@brianlulz4944 its not an arduino m8 u blind or somethin?
bro i need the part name thats amazing
nice tanks and neat, good video 1 sub
Can you also tell the names of the material required....
nice work .. look mine too from cardboard rc
Please ..make a video how to connect wire to canon please!
👍👍👍👍
Very nice detail
👍💪😍 جميل
Pls Make a Tiger Tank I subbed and liked
best. thank you
ممتاز وإخوانه
Great job!
hay thế đồng chí!
thank bro
I made a cardboard tank and the turret is a metal straw that you blow into to launch some wet paper or something
I made the tank itself but I used the turret design only
Hello người anh em :))
Chế hay
Nice tank
Bro, i need the name of all materials.
Watch this video to learn more please!
ua-cam.com/video/ReMYMD6sjag/v-deo.html
welcome to vietnam
It took me 2 hours just to make circles
Làm T-54 thử đi bro :) Mình cũng có 1 con T-54 :)
tôi Có Con T72 Nha bạn
@@pvt.jamesramirez1057 video làm ông ơi
@@minhquanhoang6122 làm lại để tôi Mất 3 ngày Làm à
@@pvt.jamesramirez1057 tôi xem kênh ông có thấy video T-72 đâu. Ống ném link fb đây tôi kết bạn xem tăng nào
@@pvt.jamesramirez1057 hoặc ông vào kênh tôi đi. Có đg link fb đó
Please describe details regarding remote control components and source
yo bro how did you achieve this? what did you study in school
Thanks for you
That one Russian tank ☠️
instructions not clear
a disappointed viewer
can you please share the dimensions
Is army tank a module ka to link bhejo😅
He is not Indian
Can u name the components please
Type of RC remote used
Motors used
That’s geared motor it can be found in robu.in
What is RC system name
Does it shoot a projectile?
Bộ tạo lửa là dùng cái gì vậy bạn
Watch this video to learn more please!
ua-cam.com/video/ReMYMD6sjag/v-deo.html
nice
Á dù anh là aem from việt nam and mỹ
No way
❤️ ❤️ ❤️ ❤️
I think you're in vietnam too also where to buy the mechanic thing im on Vietnam too please help
super
Yes
How does that cannon work?
can u share template of it ??
If you like this video, don't forget to subscribe to my channel 😘😘 ua-cam.com/channels/GNqrq8MOiC3COCyFQZGYYA.html
Bro, please explain me that firing mechanism , what you have used. Please bro
What are the dimensions?
what did you use to cut the cardboard