$400.00 YZ250 Running and Driving
Вставка
- Опубліковано 30 чер 2018
- Hey guys thank you for comming back to my channel! In todays video im just starting up the bike and leting it run for you because you guys ddnt get to hear it start up yet. I hvae big plans on projects for the future this channel is about to get sick! so SUBSCRIBE what are you waiting for!!?
If guys would like to support my channel go check my merch??
teespring.com/stores/diedrich...
Produced with CyberLink PowerDirector 16 - Авто та транспорт
Anyone else confused as hell with the MotoMigs entry?
Yeah I was like did he have a second channel I didn’t know about
Mwjwmmmwwmmjmmmj000jwtjwjt
Wjokyyykoyayayyoayoaoo
Ykyokwjwwjwjwawawwjwawwwwjjw
right here bro?????
Yea asf
Bro I was so confused with the Moto migs intro😂
Yep same
Yeah maybe Moto migs had it
Jared Miller Moto megs in the US this guys in Italy
Same
Same
250cc 2 strokes are so beautiful.
Great job my man! Loved the series and look forward to watching another. Keep up the great work 👍
lmao the migs meme has me ded rn LMAO
Bike looks and sounds amazing! Great job man, would love to see another dirt bike build or something of the same area!
Redemption is yours! Thanks for posting the running video! I subbed and will be looking forward to more of your content!
You know that rear shock is clapped when the bike rocks back when you rev it😂
This bike is a Ebay special
i think its because of the clutch not seperating completely. that puts tension on the chain thats to short and thats what causes the diving
@@bikewolf7455 the bike was in neutral bruh...
@@bikewolf7455 It's simple physics like on any other engine reving up. There's a momentum pointing into the opposite direction of the crank and as the crank is spinning forward, the momentum wants to tilt the engine backwards so the bike goes down. It's Newton's third law.
@@AbcAbc-ox6pg Obviously you use your head beside something to put a helmet on. 😂😂😂
HAHAHA! You got me with that music. You're videos are always comedic genius!
0:10 broke my heart
I’m in the middle of restoring my 2001 yz 125 this series has excited me so much to get it finished ASAP
Watched the whole series start to end favorite channel on UA-cam
Good work young Bro! Now let's go get it dirty!
Awesome dude, congrats for the result!
This is amazing! This baby looks so good.
That was a great restoration I love Yamaha's that's what I've rode my whole life
Yessss, looking good!
I loved the intro 😂
Loves your vid bro! Love from malaysia ! ❤️🇲🇾
I'm impressed. You've taken an old dog and made it look like a new machine.. Looks like you are in Europe but have some American Trucks! How cool is that!
Love how the graphics come before replacing the tyres ! 😂
bel video continua cosi fra!
Non pensavo fossi italiano! Hai fatto una bella serie complimenti
That thing is sick ngl I wish I had one I love those things
I‘d love to see a Hercules Prima 5s Tuning Project
You are in Italy here 🔝
spettacolare! spero di vedere altri restauri in futuro ahah
Sounds great!
Really nice video! 🤙 fiat 500 project
Keep going with the dirt bikes
Nice bro it sounds like a Lamborghini
Intro dead ass got me
I would like to see the project about the orange truck ! ( sorry for my english, i'm french ^^ )
I like the song sir!
Nice build!
Great vid 👌👌
Lmaooo you actually got the 69!!😂😂
imagine he doesnt even know what that means xD
Kevo Morider The 69 is just cringy. Funny thing in middleschool probs
I have a Nicky Hayden tribute 69 on my bikes.
69 REALLY LOOK RC GROW UP
Lmao fr
Dajeee è una bomba🤙
The orange pickup ! :)
My nigga, you just earned a new subscriber. 💪🏾🔥
so you live in italy? oh my gaaaaaad, really? btw great work on the bike, i've followed the entire series
Amazoing
Nice build
Great video, i live in caneva. In the video bike ride that coincidence ahahah.
D i o c a n
Só faltou ajustar a lenta dela....moto ficou muito linda.parabens
ITS SHINING!!
1998 firebreathing CR250 Ronnie Mac rebuilt plz
Wow gran bel lavoro 💪👍
dude you should put that in the garage and cover it haha 98 yz 250 that's fair old man looks good as
I like the Moto Migdalia intro😏🙃🙂
I meant Moto migs
You should do a build on a quad or a pit bike next!
So glad you shaved that moustache off 👍🏻
You don't drive a dirt bike. You ride it!
Take off the hand guards but other than that, that bike looks amazing
Like the halo reach hud
Overall you did a nice job of rebuilding your bike! Not sure if you did anything with the suspension but that shock needs to be rebuilt and I bet the forks do as well. When you were revving the motor you can see the shock move and that's not good.
Great
Bruh the migs intro😂
Good work friend👌 I also have a yz of the year 1998 and i would like know which tank of petrol is it and where I can obtain it.
The C-10 would sick all redone
250 cc two stroke honda please !!
I got a question bud does your bike have a pwm carb with a choke idle adjust? My 99 has that carb and it never idles and it's always thirsty
I could help you with that idle. I'm sure you probably already have that handled. It appears to be running good, you just need some fine adjustments.
Great..
if you did a rebuild on that crf that be dope
I follow you from Veneto
Omg yes
Ottimo lavoro😍😍😍
What’s with the moto migs intro?😂
Does this thing not idle or what?
yeah i just want to hear it idle not reaving
kurt jago facts
kurt jago its a 2 stroke they have low to no idle
2 stroke and idle doesnt mix very well
See what i did there?
Jimbo i got 2 stroke and he idle just fine
That little yellow car would be awesome if you could
that sit nice
Wasn’t you going to build a shifter kart with a big vtwin ? if so do that plz
Why weren't you getting it in the band😭😭😭
George Bowman hes scared
I think he was breaking it in
brand new engine rebuild, have to break it in before that
Probably doesn’t hit band for 450 dollars 😂
George Bowman I think gunning it with a new engine can blow it up lol
Your english is perfect
yamaha banshee can be a NIICE project
The hondaaaa
Nice work bro!!! What did it end up costing u to fully rebuild that yz250??
Lol being it's a ebay special and parts are spray painted and not replaced. No more than 400. Feel bad whoever gonna buy the bike next.
@@fatrickspark1090 lol that really doesnt mean If you buy anything on ebay that would be shit. In ebay you can buy wiseco pistons and more good parts
@@urhopulkkinen9044 yeah I know that. I buy some of my parts from ebay. But my yz250 isn't spray painted or have the cheapest parts on it. That's for sure. Like I said. I feel bad whoevers gonna buy the bike next.
beutiful dirt bike
Orange pickup👍🏼
Pickups, motorbikes etc do what you got most interest on at that time lol
The🔝🔝💨
Get one of the c10s up and runnin
He might actually have a nice bike when he’s there with our rm
How have the spray painted wheels stood up to riding/use? They still look decent?
So I'm positive you've got this question (a million times), but what was the cost purchase-through restoration? I have a 99 kawasaki 250 I'm eyeing!
ima few years late but, 400 for bike, 1800 in parts. total 2200....hope i helped some lol..you ever get the kx250??
@@Phuckles1 😂 I’m wondering the same thing
nice moto migs into😂😂
Matt Hermann lmao I was so confused at first 😂
Lightning 12 I was 2
Lightning 12 same😂
I thought it was a glitch or something
Running and driving YOUUU FAKING RIDEEE MOTORCYCLE IIIMMMM TRIGGGERRRED
Where do you live in the world??? Cause that defender is siiiiiiick
Bellissima moto, complimenti
interested to see how the painted rims hold up??
bro u should do the Kawasaki ksr 110 please!!! u awesome btw
Hey man if your looking for levers I bought my 98 yz125 brake and clutch for a great price on rocky mtn atv
nice build mate but you need to tune the thing its not running or sounding nice and crisp like it should
When is saw the moto Migs intro I thought my UA-cam was bug’t
You should make a Honda 250 CR 1998 rebuild
cr500 complete restoration 😈
Glasgow song love it I'm form Glasgow
It's probably your carburator needle you need to adjust ...haha
I think you have the wrong kickstarter on it, that kickstart is meant for a left hand kick engine since the bolt that holds everything together is on the inside and the scuffs the foot peg makes on the lever are on the other side