Welding is truly an engineering art form. You don't appreciate how hard it is to weld once you've tried it. I cannot even imagine what our world would look like without professional welders.
There is so much to learn about welding(and every other trade). I remember in my youth I OVER did things to make them 'best' or 'better' or 'not fall apart'. The cost of remodel of those jobs will not match expectations. Recently, my son was welding the frame for a large slab sawmill and I suggested that 'fine' was better than 'that will never move' life provided the exclamation point when a few of those joints needed to be altered or removed. Also, my Dads only son had a similar issue with this listening skill. For the naysayers, please post your videos. They will help us all!
@@uk_siren got a lathe, milling machine, plasma cutter. mma, migmag, tig, platebender, roller . big bandsaw, drill press. and i also have a separate wood workshop. dont like dust on my metal machines haha. bought all from aside of my job projects. :D
I literally do the same stuff man I swear.. just thicker. I wish my supervisor would let me use some 045 hard wire on some of the stuff I weld. It would be better in most cases, but instead “i” use, “my supervisor makes me use” 1/16 dual shielded flux cord on EVERYTHING 🤷🏻😵💫😵💫🤦🏻🤦🏻🙄🙄. So needless to say I’ve learned to adapt… and mind you all our stuff gets x-rayed
Im a tig pipe welder, my first tip is never get happy with your weld. always improve yourself. in Europe we never finish the weld inside a elbow because is going to absorve more heat inside and will cosed, i know you secure the piece but we both know he will close a litle, we put in the level close to the risk to discount the closing. but you doing a good job i just notice you weld like i weld with mag.
hope you had a few quid in for that one kelv, should be a lovely price job with the skill involved, great fabbing and a beast of a spool mate, my old mate Tel has just been doing a bit with you :) love the content dude keep it up, and hope you have a great xmas PearD411 commenting off my brides account
Nice video, greetings from Finland. I wonder if you welded the socket in the wrong place - can you simply cut it out, weld the hole and grind it nice and clean?
good job man keep up the good work man on youtube we do heaps of pipes at our work as well with steel with a cut out in it so it can go into the ground for farming we do about 1000 of them in total all year anyway you deserve it man uploading your videos from your work 😊
Nice work fallar, nice little job to take on, bit of a change from welding pipe and flanges all day long.... i know what it is like, nice to have a change from time to time
Great job, if you don't mind a little tip, when fitting a small socket screw a plug into it, it's so easy to distort it when your tapping it into position, I know from bitter experience, I was asked to weld a 2" socket on a pipe that was already installed up in the air on a Friday afternoon, back in my disco days and i was very keen to get home, the job went fine so i thought on coming in on Monday morning I got my balls ripped off, i'd distorted the socket knocking it straight and the pipefitters couldn't do the job they come into do over the weekend, for the rest of my working life i wouldn't weld a socket on without a plug or any fitting screwed into it.
That came out looking really nice man, there’s so much to learn from watching these kinds of videos and the explanations you give when you’re doing something & why you do it the way you do at that given time. Those pull tabs/dogs to close the gap are actually clever. Gonna have to make me some of those! Keep up the good work man
Nice work. I work with pulling with the Fronius .. it's great... solid core and Flux core on top. 5 stars your are good and skilled. So im RELAXING ... good work come to DK and I show u Copenhagen!! ! drink beers
I work for a pipe fabrication factory. The biggest pipes I’ve built have been a 72inch elbow. Biggest we make in general is 122 inch that one takes 2 forklifts to move around
8:54 😱 !!!! How you can do that bro !!! 😲 You gone have huge problème !!! Put a sticker Kemppy on your Fronius welding machine !!! You live à dangerous life bro 🤭 Good job man 👍
I watch your content because it's different from what I do here in the US and I'm learning things from watching your stuff I just want to make my next will better than my last and I've always wondered what it's like to squeeze the trigger on a fronius welder they have them here in the US but I haven't ever been fortunate enough to work for a company that uses them first and no matter where they're at in the world they are pretty expensive
Some people can weld with a keyboard and do it all day long from the coffee shop. I challenge anybody that questions your work to show you how they would do it better. Spoiler, It won't ever happen. As always NICE JOB!
Top work. Thread protectors are weld type sockets in the UK as far as I know. From my supplier they are anyway. Suitable for steam and much higher temperature and pressure than the malleable ones sold.
I am a CWI….. in the states here that threaded socket as you say …… would never be used for code work…. Looks pretty much like a threaded coupling, and the root would need to be a full pen. Weld…. Just sayin ….. other than that the welds look good 👍
Made a good job of that👌 is a shame they wont let us use solid wire at work, most got to be tig root, every now and then a fleet root👎 Sometimes fluxcore fill, most of the time low hy
@@ARCONEWELDING solid wire would be great to use, especially larger sized pipe ie 18" and above. Even if just for the root, then dual shield or fluxcor (whatever you want to call it lol) for the fill and cap. Tig rooting them takes sooooo long. Have two miller pipepro in the shop with RMD, but clients wont come forward out of the dark ages 😒😄 Another great vid though, good to see other ways of doing things 👍
Great welds but that’s not really a positional, you’re in a nice clean shop while we bust ass in the field lol, good to see a great tradesmen achieve success.
Saw your garage video. now you need this ua-cam.com/video/il2iyT523sc/v-deo.html . For the big pipe you need bigger pipe stands with adjustable H beam inserts. If you were to do xray high pressure pipe welding outside of the bevels is not allowed. I welded with stick exclusively in my 45+ years and ran a welding rig as a contract welder in Alberta Canada. The job was 100% xray work and in the field mostly. Pipe sizes were mostly big inch 24"-48". Almost always hot work. Even wrote up a 70- page booklet on how some of it was done. It was done for something to do in retirement.
Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material. Free technical support (sealing, heat preservation, heat insulation, fire prevention problems) All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere
Welding is truly an engineering art form. You don't appreciate how hard it is to weld once you've tried it. I cannot even imagine what our world would look like without professional welders.
A blessing from God. Thanks Christ Jesus.
There is so much to learn about welding(and every other trade). I remember in my youth I OVER did things to make them 'best' or 'better' or 'not fall apart'. The cost of remodel of those jobs will not match expectations. Recently, my son was welding the frame for a large slab sawmill and I suggested that 'fine' was better than 'that will never move' life provided the exclamation point when a few of those joints needed to be altered or removed. Also, my Dads only son had a similar issue with this listening skill.
For the naysayers, please post your videos. They will help us all!
Every thing I've watched you do is top class your a credit to welders world wide and that's from an old Irish welder
That Froneus with auto wire speed... Wow. Sounded absolutely perfect. That's a monstrous job. Great work!
Thanks bro
7 years welding and fabrication later but finally starting my first pipe welding job monday, cant wait!! thanks for the tips, awesome channel!
you watch youtube for your work. that is crazy XD
@blackdaan I was actually a custom canal boat and barge builder, don't think these is alot of that on UA-cam 👌🏼😂. Why are you watching? 🤔
@@uk_siren i actually have a hobby workshop. I love metalworking. But i also work i metal so you can never tell i wqtch for work
@@blackdaan nice, I've also got the same kind of setup but in a friend's unit. Metal working is awesome. Can't beat it.
@@uk_siren got a lathe, milling machine, plasma cutter. mma, migmag, tig, platebender, roller . big bandsaw, drill press. and i also have a separate wood workshop.
dont like dust on my metal machines haha.
bought all from aside of my job projects. :D
Finally a welder and a proper job to be welding
Spot on bother
Big respect and quality vid
I literally do the same stuff man I swear.. just thicker.
I wish my supervisor would let me use some 045 hard wire on some of the stuff I weld. It would be better in most cases, but instead “i” use, “my supervisor makes me use” 1/16 dual shielded flux cord on EVERYTHING 🤷🏻😵💫😵💫🤦🏻🤦🏻🙄🙄. So needless to say I’ve learned to adapt… and mind you all our stuff gets x-rayed
I think pipe fabricators have all different methods and personal preferences. Keep up the good work
Im a tig pipe welder, my first tip is never get happy with your weld. always improve yourself. in Europe we never finish the weld inside a elbow because is going to absorve more heat inside and will cosed, i know you secure the piece but we both know he will close a litle, we put in the level close to the risk to discount the closing. but you doing a good job i just notice you weld like i weld with mag.
When you use pulse do you use pmc mode???
What'd u put ur root in with? Short transfer or stt?
hope you had a few quid in for that one kelv, should be a lovely price job with the skill involved,
great fabbing and a beast of a spool mate,
my old mate
Tel has just been doing a bit with you :)
love the content dude keep it up, and hope you have a great xmas
PearD411 commenting off my brides account
Bigger and Better my Friend.....love all your videos.....cheers, Paul in the USA
Thank you for climbing inside . I needed to see that
Surely those elbows came in measure wise start and finshing at the inside of the werld ? Is there Amy X-ray or us checks or these welds also ?
Nice video, greetings from Finland. I wonder if you welded the socket in the wrong place - can you simply cut it out, weld the hole and grind it nice and clean?
good job man keep up the good work man on youtube we do heaps of pipes at our work as well with steel with a cut out in it so it can go into the ground for farming we do about 1000 of them in total all year anyway you deserve it man uploading your videos from your work 😊
Thankyou mate
I am sure it is just me, but when you were doing the root pass it did not seem to me you were getting any penetration on the base metal?
Nice work fallar, nice little job to take on, bit of a change from welding pipe and flanges all day long.... i know what it is like, nice to have a change from time to time
Can’t believe you tack those line up clips on out of the weld zone
How can you stop this pipe from “pulling” from such a big weld?..or is there a certain tolerance?…
A really nice video, interesting piece & master craft work. I wish we could see more tig welding though!
Im not good enough at tig pipe to show you anything unfortunately
How did you do that gap spreader?
You are doing Fantastic Job, it is hard work but, I know you can sleep well, when job is done right !
Thats it, a weight off my shoulders once its done
Diesen Job habe ich 43 Jahre ausgeübt davon 25 Jahre Montage im in und Ausland heute bin ich seit 10 Jahren in Rente.
very interresting, thak you.
Absolutely fantastic work and quality skills there. That’s a beast of a pipe I would of had to clime through that for a laugh 😂
Cheers buddy
Is it possible cut a 18 inches pipe elbow with bevel by Plasma cutter?
you popping off the walls with excitement. great job man
Great job, if you don't mind a little tip, when fitting a small socket screw a plug into it, it's so easy to distort it when your tapping it into position, I know from bitter experience, I was asked to weld a 2" socket on a pipe that was already installed up in the air on a Friday afternoon, back in my disco days and i was very keen to get home, the job went fine so i thought on coming in on Monday morning I got my balls ripped off, i'd distorted the socket knocking it straight and the pipefitters couldn't do the job they come into do over the weekend, for the rest of my working life i wouldn't weld a socket on without a plug or any fitting screwed into it.
Yo bro your work is awesome I have just started watching your vids. Just brilliant I'm hoping to get into this line of work myself at some point. 👌👌👌👌
Cheers bro and goodluck
Thank you for this video.
Easy ,great job.😀😀😀😀😀😀😀😀
That came out looking really nice man, there’s so much to learn from watching these kinds of videos and the explanations you give when you’re doing something & why you do it the way you do at that given time. Those pull tabs/dogs to close the gap are actually clever. Gonna have to make me some of those! Keep up the good work man
Great work Thanks for sharing
Thanks buddy
How fit up ovality pipe with fittings
Fantastic work.
เชื่อมได้สุดยอดมากๆเลย👍👍👍
Keep up the hard work young man i use digital on my Race car pipe we love seeing bugeyes dead flat
Appreciate it 👍🏽
Nice work. I work with pulling with the Fronius .. it's great... solid core and Flux core on top. 5 stars your are good and skilled. So im RELAXING ... good work come to DK and I show u Copenhagen!! ! drink beers
nice work my friend
I learn a lot from you
very sensitive and clean work, well done
Thanks mate
Great work Buddy!
I appreciate it
I like your voice when you are in the pipe......
I work for a pipe fabrication factory. The biggest pipes I’ve built have been a 72inch elbow. Biggest we make in general is 122 inch that one takes 2 forklifts to move around
Nice work!
Cheers bro
Great job
8:54 😱 !!!!
How you can do that bro !!! 😲
You gone have huge problème !!!
Put a sticker Kemppy on your Fronius welding machine !!!
You live à dangerous life bro 🤭
Good job man 👍
🤣🤣🤣
Im causing trouble 😅
@@ARCONEWELDING 😋
I watch your content because it's different from what I do here in the US and I'm learning things from watching your stuff I just want to make my next will better than my last and I've always wondered what it's like to squeeze the trigger on a fronius welder they have them here in the US but I haven't ever been fortunate enough to work for a company that uses them first and no matter where they're at in the world they are pretty expensive
Yeah mate they are expensive but worth every penny, and not every weld will be your best so dont go crazy chasing perfection
why wouldn't you stick weld this?
Nice job👍
haters will be haters. looks good
love your work a true craftsman who enjoys his trade
Cheers bud
Umarım emeğinin karşılığını alıyorsundur.tabi UA-cam dışında;)
Your bad weld is better than my weld haha just ignore the bad comments man u need clear mind too weld that my important thing before i weld
Some people can weld with a keyboard and do it all day long from the coffee shop. I challenge anybody that questions your work to show you how they would do it better. Spoiler, It won't ever happen. As always NICE JOB!
Top work. Thread protectors are weld type sockets in the UK as far as I know. From my supplier they are anyway. Suitable for steam and much higher temperature and pressure than the malleable ones sold.
Very Nice ... Respect...
peace
Большое преимущество сварки труб большого диаметра, это возможность залезть внутрь трубы для контроля. Спасибо за профессиональную работу🙂
I am a CWI….. in the states here that threaded socket as you say …… would never be used for code work…. Looks pretty much like a threaded coupling, and the root would need to be a full pen. Weld…. Just sayin ….. other than that the welds look good 👍
omg! you melt your welding hetmet
Good job br
lovely job.
Nice bro...!
Sir i work in Dubai five year pipe line fabrication sir i need veza witch your country
It'll slap. 🤘😎👍
Damn thats an average summer day where i am you must of been dying
我是中国的焊工，请问你们有管工这个职业么
Nice
Have done about a thousand of them 😊…. It gets easier mate
i would love to watch your job too
Chaudronnier tuyauteur soudeur depuis Bordeaux France salutations
I should put this on my car
Never welded a pipe on mig
Those arent that easy to put together, welding isnt easier. Looks like you did a very good job. Keep those vids coming and ill keep watching. Cheers.
Cheers mate, i like the sound of that
Are y’all hiring? 👀
Cool
Made a good job of that👌 is a shame they wont let us use solid wire at work, most got to be tig root, every now and then a fleet root👎
Sometimes fluxcore fill, most of the time low hy
It would be fun trying different ways but all we do is solid wire
@@ARCONEWELDING solid wire would be great to use, especially larger sized pipe ie 18" and above. Even if just for the root, then dual shield or fluxcor (whatever you want to call it lol) for the fill and cap. Tig rooting them takes sooooo long.
Have two miller pipepro in the shop with RMD, but clients wont come forward out of the dark ages 😒😄
Another great vid though, good to see other ways of doing things 👍
a clearly see a tig torch baybe for the first pass
Great welds but that’s not really a positional, you’re in a nice clean shop while we bust ass in the field lol, good to see a great tradesmen achieve success.
Had the same thing happen to my helmet afew months ago scariest shit ever coz helmet isn't cheap
Good job son.well done. Steve from Sunderland just retired pipefitter/welder. Ps.hope you get well paid for a job you tured out too quickly. Lol.
👍👍👍🔥
Saw your garage video. now you need this ua-cam.com/video/il2iyT523sc/v-deo.html . For the big pipe you need bigger pipe stands with adjustable H beam inserts. If you were to do xray high pressure pipe welding outside of the bevels is not allowed. I welded with stick exclusively in my 45+ years and ran a welding rig as a contract welder in Alberta Canada. The job was 100% xray work and in the field mostly. Pipe sizes were mostly big inch 24"-48". Almost always hot work. Even wrote up a 70- page booklet on how some of it was done. It was done for something to do in retirement.
in canada? X ray hot work welds? You must have been earning 100 an hour
What a nightmare job. Had to feel good once that was done.
It really did! 1hr just to weld one flange is too much
As an ex multi coded welder, we’ve went back the way. It’s need doon, and arse up. Definitely underpaid.🤔
👍👍👍👍🇹🇭
Россия
First!
Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material.
Free technical support (sealing, heat preservation, heat insulation, fire prevention problems)
All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere
Cool