Been following you're channel past couple weeks, I've been a installation engineer for the past 6 years.. really helpful watching these service and breakdown videos brilliant!
Thanks mate, appreciate it ! I did the same as you when I first started. Always thought it would have been interesting to see how other people do things 👍🏼
Also a good idea for taking photos of PCBs is when you remove the old one the apprentice will ALWAYS play with the dip switches. So good thing to double check they're all in the original positions 😂
Top work mate. I like bouncing the way I do things off of you. I'm a sparky and refrigeration mechanic, but never done too much service work. I'm doing more now these days as I'm over installs and I'm finding your videos an invaluable resource.
Thank you for taking the time to construct these vids. Love em. Little tip I was told is you could swap over the connector plugs to confirm it is a doggie cfm Bit shocked we didn't hear "to be fair“ you consciously not saying it anymore?
great video , couldnt you have switched the fan connectors to diagnose the fan problem , I am thinking plugs would be the same , excellent descriptions of your work thanks
Yes mate, usually different manufacturers will put this sort of info into the Service Manuals. Mitsubishi Electric also had an app with loads of info. Well worth a download 👍🏼
Those fan motors are bldc motors with built-in control board. So they take rectified mains which is basically what u get after putting a FULL BRIDGE RECTIFIER & capacitor across 240v mains. If u apply the formula of calculating ac peak voltage u will get 340v & the control signal i do not know much about cus if that goes out u will have to replace the motherboard.
Mine hasn’t had much use yet either to be honest 😅 Hoping it’s going to pay off this winter though ! It did the job perfectly here mate ! Hoping it will be good for fault finding and small repairs like this in the rain 🤞🏼
hi, i love your videos, a nice one again. Where did you get your Mitsubishi Pullover from :) ? I like Mitsubishi units i have one on my own and also do install these sometimes, i think these are very good units. Couldnt you try to swap the two Fan motors, to see if the fan motor was working? regards
Thank you mate, appreciate it 🙌🏼 We have the tops embroided with the Mitsubishi logo on ourselves. Yes, definitely could have swapped the plugs over just to try 👍🏼 👍🏼
Hello can you pleaste tell what is cause of e5 error on daikin 3,5kw ceiling mono split.I know its compressor overheating but what do I need to test to see what’s wrong sorry for bad english😅
Bruv where did you get your Fieldpiece meter , and how the heck did you get Milwaukee to send you stuff , their EU website you can't even buy directly from ... Good on ya though to be fair 👌 Next thing you gonna be sponsored by veto as well eh 😎
Been following you're channel past couple weeks, I've been a installation engineer for the past 6 years.. really helpful watching these service and breakdown videos brilliant!
Really enjoying the videos mate👍🏼 just moved across from 6 years of install to service, so finding the videos very helpful👏🏼
Thanks mate, appreciate it ! I did the same as you when I first started. Always thought it would have been interesting to see how other people do things 👍🏼
I can't believe i've just come across this channel. Finally a UK version of Air conditioning fault finding and repair! Great video!
Also a good idea for taking photos of PCBs is when you remove the old one the apprentice will ALWAYS play with the dip switches. So good thing to double check they're all in the original positions 😂
Very true 🤣👏🏼
Top work mate. I like bouncing the way I do things off of you. I'm a sparky and refrigeration mechanic, but never done too much service work. I'm doing more now these days as I'm over installs and I'm finding your videos an invaluable resource.
Thanks mate 🙌🏼👍🏼
I'm one of your subs from the Phils. Thanks for sharing your video. 👌👍
Thanks mate, appreciate it 🙌🏼👍🏼
Great watch again. Keep them coming, very useful 👌👍
👍🏼👍🏼
Top man great video and a big like from me 👍
🙌🏼 Thanks mate
Another good vid, Will. A good explanation and fix. Keep up the great work.👍👍
Thank you mate, appreciate it 🙌🏼👍🏼
Very interesting to see how different HVACR is across the pond here in Georgia(USA) it’s a lot of furnaces and heat pumps
to be fair I love your videos, waiting and looking forward to the next one! - *hurry up* - keep up the good work
nothing from him for ages maybe he cant be bothered to film anymore
love your work m8!!good video
Thanks mate 🙌🏼🙌🏼👍🏼
Could you show more general maintenance? Cleaning etc
Yes mate definitely. I do a fair amount so I’ll get some filmed when I can 👍🏼👍🏼
@@hvacuk8975 great!
Double thanks for this vid!!
:)
Hi bro, this is Elitech UK. We are amazed by your talented video
Thank you for taking the time to construct these vids. Love em.
Little tip I was told is you could swap over the connector plugs to confirm it is a doggie cfm
Bit shocked we didn't hear "to be fair“ you consciously not saying it anymore?
No problem mate ! Thanks for watching 🙌🏼 👍🏼
😂 Yeah, maybe it finally sank in…..or maybe I realised I could edit some out 👀
@@hvacuk8975 lol but it's kinda like your catchphrase. Got me saying it for a bit.
great video , couldnt you have switched the fan connectors to diagnose the fan problem , I am thinking plugs would be the same , excellent descriptions of your work thanks
I bought myself a big fishing umbrella. I use a circular magnet with a Munson ring screwed in to it to hold the brolly up. Works fine 👍🏴
I thought about doing this too mate, definitely would of been the cheaper way 😅👍🏼
Great video once again
Good work, how did you know what DC voltage it needed 15 VDC and 340VDC? Does it state it from the manual or?
Yes mate, usually different manufacturers will put this sort of info into the Service Manuals. Mitsubishi Electric also had an app with loads of info. Well worth a download 👍🏼
Those fan motors are bldc motors with built-in control board. So they take rectified mains which is basically what u get after putting a FULL BRIDGE RECTIFIER & capacitor across 240v mains. If u apply the formula of calculating ac peak voltage u will get 340v & the control signal i do not know much about cus if that goes out u will have to replace the motherboard.
Whats the umbrella like, bought one last week, but nor had chance to use it
Mine hasn’t had much use yet either to be honest 😅 Hoping it’s going to pay off this winter though ! It did the job perfectly here mate ! Hoping it will be good for fault finding and small repairs like this in the rain 🤞🏼
hi, i love your videos, a nice one again. Where did you get your Mitsubishi Pullover from :) ? I like Mitsubishi units i have one on my own and also do install these sometimes, i think these are very good units. Couldnt you try to swap the two Fan motors, to see if the fan motor was working?
regards
Thank you mate, appreciate it 🙌🏼
We have the tops embroided with the Mitsubishi logo on ourselves.
Yes, definitely could have swapped the plugs over just to try 👍🏼 👍🏼
Good content 👌👌
I just bought one of those umbrellas, different reasons, I live in Australia and am tired of nearly burning to death doing repairs and installs.
Your information is good
Hello Good video. I m french . Can you give me the reference for the tester Mitsu at 18:27. Thanks
do you do much on the install side
Hi there, I’ve got a fluke and a testo tester do you know where I can get any thin testers like the Fieldpiece ones cheers
where u get your meter from ta
I have never seen a fan blade come off that easily 😂
😂 pure relief right there mate 👍🏼
Hello can you pleaste tell what is cause of e5 error on daikin 3,5kw ceiling mono split.I know its compressor overheating but what do I need to test to see what’s wrong sorry for bad english😅
What's up back on track Mr engineer
👍🏼
This video in actual problem is DC fan motor ya pcb bord?
Where u at ol chap? You still with us?
Ya doin ok?
U8 is a fan motor fault? Haven't watched the video just going off memory
Spot on 👍🏼👍🏼
Where u at mate?
Bruv where did you get your Fieldpiece meter , and how the heck did you get Milwaukee to send you stuff , their EU website you can't even buy directly from ... Good on ya though to be fair 👌
Next thing you gonna be sponsored by veto as well eh 😎
Good stuff mate greetings from Sydney, Oz. What's the demand like over there for hvac technicians?
There is quite a lot of jobs for HVAC in UK
£100 for an umbrella crazy world we live in
That shit magnetic tho
But you could not diagnose the fault , you decided to change both of them….
Spin first
Bro. can I get a job
I am from India
mate please lose the music
Enjoyed that 👏 follow u on insta, didnt no you were on here
Nice one mate 🙌🏼👍🏼