In the past I have used a normal rivet press and a vice to repoint darts. Being a mechanic I wouldn't recommend it to anyone who isn't familiar with material stress as it needs some precision and muscle memory so as not to ruin your darts. That said, I quess you could use a long nut or an assortment of nuts (maybe pc spacer nuts) to connect the dart with the repointing tool. Thanks again for the great content WWD, love it!
I used to have a set of Slim Jim darts which used a 4mm thread for the shafts not a 2BA thread. They were great darts , but the shafts on the market became worse and worse in quality . There were only aluminium shafts in 4mm available and the quality of the threads were variable . In the end I had to find a replacement dart as I could not buy decent shafts in 4mm . In addition I had to replace shafts just about every time a dart bounced out , as they bent . Also replacement was always the only cure with Robin Hoods due to bent flight slots . You must use a rubber ring between the dart and shaft too , not a problem , but this necessary to counter vibration . Honestly I have never found a dart that I can throw as well the Slim Jims . I use Winmau Stratos now , but I wish I could use the Slim Jims . Beware of alloy sharts in any dart though ....just saying WW !
I got given some Slim Jim's to try out and I was the same, always bending the shaft. Which I then had to change. you could straighten out the shafts to a point and the darts still threw OK but them being bent messed with my head. I did get them repointed but in the end I gave them back to the chap that let me have them as they were too much like hard work. Having a mind like a box of ferrets I don't need anything messing with it and bent shafts did that even if the darts kept going where I wanted them to because they're going to spiral a bit.
So slim, I don’t think I could hold them well enough to throw. But great review, unique darts. The shafts screw on similar to the Bottelsen hammerhead gt3. Very cool setup. Great review!
Cheers. Yeah, there is definitely an adjustment period trying to figure out a grip for such thin darts. I'm not entirely convinced I'll stick with them.
Hey WWD you can directly heat the point with fire and once it’s hot enough you can remove the points then add new ones then just superglue it shut and your good to go
Great review once again! I have always been on the fence with M3 darts because of how thin they are. Not sure if they would help or hurt my throw. They do look super nice and I love the color red! As others have said, would probably need an adapter for your re-pointing tool and if these were my darts I would definitely want them re-pointed. Such a nice set of darts looks cheap with a trident nose cone. Sure they will work for the time being but a specialty point is the real solution. Keep the excellent reviews coming!
great video, as alwasy! you should have noted the depth negative ** mm. but maybe I am too nerdy. keep it up. by the way, I was thinking you could do some q&a video or maybe comment on darts desicions (routes or out ways) and how they changed over time. Either way, you are my go-to channel ❤💪🎯🇨🇭
Amazing darts, I’ve looked through their catalogue several times the past few years, only for soft tip though, and I hate the m3/4ba tips so I always passed, now that I’m throwing more steel tip I might give it another go. There has to be a conversion jig out there somewhere. Maybe contact Empire, or Custom Made in the UK. I can’t imagine you’d have to buy a whole new repointing tool when a conversion screw would fit the bill. I’ll look around some more, but if you find one please update us! Thanks for the review!!!
Cheers Zolto. I know I can use a rivet tool to get the points out so that shouldn't be an issue. Getting new points back in will prove tricky. I'm going to head to the hardware store today and see what I can find. I think a short hollow tube is all I need. I'll slide it over the M3 threads and onto the lip on the back of the dart. From there I should be able to use my repointing tool. Here's the lip on the back... ibb.co/vdKYj14
There's mixed opinions but I think a lighter dart is a bit more forgiving over a long format match. We've all heard that a heavier dart is easier to throw right? That might be true but I think over a longer format most people will get a bit sloppy as the match drags on with a heavier dart.
I think, it's possible to make m3/2ba adapter using some turning machine. May be some DIY enthusiast in your area have one. Then you can simply use your repointer.
I did find a way to translate the website in the search bar where you type in the web address, but I don't see that they ship to USA when I tried to place the order.@@jonnyfoster8414
What happened to your Yoshimura Darts that you planned as your new Matchdarts? I myself am from Germany and Jochen did 2 Handmade Sets for me. One M3 and one 2BA. I am very pleased by his work and can only recommend him.
I'm not sure, but maybe m3 have a kind of adapter with 2ba on both ends. They are ready think, it almost looks like you just got a 9mm long stamp with steel tip. 😁
2nd comment ..... I do like the external screw thread idea in principle at least . Like my old Slim Jims though the dart owner is going to have a limited number of places to buy replacement shafts from .....prices hopefully will remain affordable and hopefully the quality remains good . I know some people will be thinking 'this guy is really pessimistic and anti ' but I am passing you my past and real experience ; I am not in any way being paid to comment , I am just tell you my opinion from experience . I am tempted to try these myself to tell the truth , but I wonder how long shaft supplies will be available and of good quality . Best wishes
I remember the Red Dragon Slim Jim's. I always wanted a set of them but could never find them. Anything with specialty stems has the risk of them no longer being made. I'll pick up a couple extra sets of the alloy stems from A-Z Darts for now.
My Slim Jims were given to me by a friend , Darryl , god rest his soul , and I absolutely loved those darts ; shame shaft production messed up . Where I have safely stored them away is a mystery ! Hope you continue liking the M3 dart and thanks for showing them to us .@@WorldwideDarts
Man, these look like they would be fun to throw! There are some nice/unique items on their website. Don't think I'd invest in a new "system" though... As far as repointing, they sell a M3/2BA converter for tips, and using something like the D.Craft mini darts, you can throw that on the back end & still insert the 2BA thread from a repointing machine with room to spare.
@@WorldwideDarts Yup, nevermind... I missed a step! Had to see it in picture form to realize my error. I was using their M3/2BA converter backwards. My bad...
A severe case of dartitis did me in. I had to stop playing darts completely for quite a while. This is the end result. Somehow I'm still able to put up 90+ averages if I'm playing a lot.
There's a video somewhere here on UA-cam of Peter Wright repointing his darts in the worst way possible with a vice, a piece of wood and a hammer. Might need to do that 😂
@@WorldwideDarts that’s his game darts, he loves them so much he bought a 2nd set, doesn’t hit a 180 all the time but hit one yesterday. He likes thin light darts, his previous darts where the colonial soft tip 12 gram darts. He’s also a big guy 7’2” lol
The slimmer the better road, feels like cheating in videogames. Buy 40g brass bombs, pactice your game and get better, so you dont need to throw pencils to hit trebles anymore. 😂 Now Jokes aside. Its a not a bad idea, but the repointing tool needs either some kind of adapter or you need new repointing tool.
*Dartkiste dart shop* www.dartkiste.de/m3-darts/
Did you have to contact them for shipping price?
In the past I have used a normal rivet press and a vice to repoint darts.
Being a mechanic I wouldn't recommend it to anyone who isn't familiar with material stress as it needs some precision and muscle memory so as not to ruin your darts.
That said, I quess you could use a long nut or an assortment of nuts (maybe pc spacer nuts) to connect the dart with the repointing tool.
Thanks again for the great content WWD, love it!
Great Video as always, I would probably not find this content with out you bringing it. Keep it coming!
Thanks Frank! 👍🏻
Good video. I just started playing darts plus, I was born in Stuttgart, Germany in 1982.
As always great video and always happy to see you post another video! Big fan WordWide
Much appreciated!
Thanks for the review. I bought a Set m3 Soft tip darts in the late 90s but i never learned to throw them well.
I've actually got a thinner set at 4.5 diameter, and a special made part to allow me to change points
You have to do the custom made super slim slicks generation 1 darts review. They are 4.5mm wide.
This guy never misses anything with any darts
You should see how I'm playing now. Not good!
Just WOW, they are so cool. I find 6mm too thin for me though so I'll just drool and dream of incredible groupings and enjoy your expertise
I used to have a set of Slim Jim darts which used a 4mm thread for the shafts not a 2BA thread. They were great darts , but the shafts on the market became worse and worse in quality . There were only aluminium shafts in 4mm available and the quality of the threads were variable . In the end I had to find a replacement dart as I could not buy decent shafts in 4mm . In addition I had to replace shafts just about every time a dart bounced out , as they bent . Also replacement was always the only cure with Robin Hoods due to bent flight slots . You must use a rubber ring between the dart and shaft too , not a problem , but this necessary to counter vibration . Honestly I have never found a dart that I can throw as well the Slim Jims . I use Winmau Stratos now , but I wish I could use the Slim Jims . Beware of alloy sharts in any dart though ....just saying WW !
I got given some Slim Jim's to try out and I was the same, always bending the shaft. Which I then had to change. you could straighten out the shafts to a point and the darts still threw OK but them being bent messed with my head. I did get them repointed but in the end I gave them back to the chap that let me have them as they were too much like hard work. Having a mind like a box of ferrets I don't need anything messing with it and bent shafts did that even if the darts kept going where I wanted them to because they're going to spiral a bit.
Can't wait for "match day Monday " great content as always, keep it up!
This is amazing. Great stuff ! Perfect throw!
Great video as always. Do not think they would work for me because they are so thin but i think the grip is nice. Keep up the good work👍
Thanks. Definitely not a set for everyone. 👍
Super Slim Slicks Gen 1 darts are even thinner, barrels are 4.50mm .
Looking forward to the matchday mondays
Bloody hell I thought my Wayne Warren darts at 6mm were slim, these are even slimmer will be looking into these for sure. Big fan of slim barrels.. 👍😊
They make my One80 darts feel fat 😂
Great-great-great video!! Don’t know what is matchday monday, but consider me interested!
A series that I did a while back that gives tips and hints while in an actual match. Here was the last one... ua-cam.com/video/7kZjQ0F02ts/v-deo.html
So slim, I don’t think I could hold them well enough to throw. But great review, unique darts. The shafts screw on similar to the Bottelsen hammerhead gt3. Very cool setup. Great review!
Cheers. Yeah, there is definitely an adjustment period trying to figure out a grip for such thin darts. I'm not entirely convinced I'll stick with them.
You are a genius WWD
Hey WWD you can directly heat the point with fire and once it’s hot enough you can remove the points then add new ones then just superglue it shut and your good to go
Great choice of darts for a great video.. so cool ...
awesome shot!
Thanks 😁
M3 are real Fine Darts to throw 👍👌🎯
Great review once again! I have always been on the fence with M3 darts because of how thin they are. Not sure if they would help or hurt my throw.
They do look super nice and I love the color red!
As others have said, would probably need an adapter for your re-pointing tool and if these were my darts I would definitely want them re-pointed. Such a nice set of darts looks cheap with a trident nose cone. Sure they will work for the time being but a specialty point is the real solution.
Keep the excellent reviews coming!
Matchday Mondays YAY
I wouldn't get too excited. My standard of play at the moment might put you to sleep 😂
Very nice vid!
These are ideal for my small hands! :D
great video, as alwasy! you should have noted the depth negative ** mm. but maybe I am too nerdy. keep it up. by the way, I was thinking you could do some q&a video or maybe comment on darts desicions (routes or out ways) and how they changed over time. Either way, you are my go-to channel ❤💪🎯🇨🇭
Love to see you in a germany jersey. Greetings from Leipzig
Cheers. I get to wear it every so often as Germany makes some great darts! 👍🏻
Great shot intro ....
Thanks!
Awesome
Amazing darts, I’ve looked through their catalogue several times the past few years, only for soft tip though, and I hate the m3/4ba tips so I always passed, now that I’m throwing more steel tip I might give it another go. There has to be a conversion jig out there somewhere. Maybe contact Empire, or Custom Made in the UK. I can’t imagine you’d have to buy a whole new repointing tool when a conversion screw would fit the bill. I’ll look around some more, but if you find one please update us! Thanks for the review!!!
Cheers Zolto. I know I can use a rivet tool to get the points out so that shouldn't be an issue. Getting new points back in will prove tricky. I'm going to head to the hardware store today and see what I can find. I think a short hollow tube is all I need. I'll slide it over the M3 threads and onto the lip on the back of the dart. From there I should be able to use my repointing tool. Here's the lip on the back... ibb.co/vdKYj14
Nice triple bull
Thanks! 😁
These look great. Think i will buy these. Another quality video, tnx! How is that weight? Do you have to throw harder. Am used to 21 gr
There's mixed opinions but I think a lighter dart is a bit more forgiving over a long format match. We've all heard that a heavier dart is easier to throw right? That might be true but I think over a longer format most people will get a bit sloppy as the match drags on with a heavier dart.
@@WorldwideDarts yeah I think you might be right
I think, it's possible to make m3/2ba adapter using some turning machine. May be some DIY enthusiast in your area have one. Then you can simply use your repointer.
Cool Darts!! The website is totally in German, and I don't see any way to use for USA customers. Any advice on how to order these darts?
I did find a way to translate the website in the search bar where you type in the web address, but I don't see that they ship to USA when I tried to place the order.@@jonnyfoster8414
You should try One80 bavaria darts. Nearly the same Diabetes. But you can user normal shafts and the are at half the price.
What happened to your Yoshimura Darts that you planned as your new Matchdarts?
I myself am from Germany and Jochen did 2 Handmade Sets for me. One M3 and one 2BA. I am very pleased by his work and can only recommend him.
I couldn't throw them and they found their way to Ohio USA 😂
Well this proves your point that good Darts dont have to cost a lot of money 😅
@lKleenexl Well the new owner doesn't think so. They cost him a lot of money 🤣
@@lKleenexl Sarcasm assumed ! 179 Euros for the steel darts , plus special shafts , which are reasonable cost wise at the moment ....... hmmm
Always enjoyed matchday Monday.
Problem is, my form/standard blows at the moment.
Late reaction. But. You can repoint the darts with a rivet pliers. And press it in with a normal repointing tool
I need to get a hollow adapter at my local hardware store and I'll be able to put the points in
I removed the Screw where normal darts screw on. The thread of the m3 then comes in there and just push it in like normal
Remove the repointing screw! Genius!! I'll have to make a video as soon as I get a rivet tool. Thanks bud! @@pascaltheskull
@@WorldwideDarts okay
@@pascaltheskullgreat idea 👍🏼
Just machine an adapter for the pointer but make sure its a snug fit on that little 3 mill thread.
“dart-kissteh” it just means dart chest or dart box. Thanks for the video. Those darts are wild, but I kind of want to try them out…
Hey could you possibly review the target agora A04 please I’m thinking of getting it
Please bring back match day Mondays
Greet you warmly
What is the name of the dartboard you are playing with?
Thanks Kurt
Skipjack. ua-cam.com/video/oR6UqOnZ798/v-deo.html
You could ask the guy from Dartkiste to machine you a light adapter from M3 to 2BA
Could you not repoint them with the winmau craftsmen by screwing them directly in and not using the plug
I think Voks Darts might have something to say about the “thinnest dart” claim.
I can’t seem to get onto the website to find these darts any help would be appreciated
I'm not sure, but maybe m3 have a kind of adapter with 2ba on both ends.
They are ready think, it almost looks like you just got a 9mm long stamp with steel tip. 😁
2nd comment ..... I do like the external screw thread idea in principle at least . Like my old Slim Jims though the dart owner is going to have a limited number of places to buy replacement shafts from .....prices hopefully will remain affordable and hopefully the quality remains good .
I know some people will be thinking 'this guy is really pessimistic and anti ' but I am passing you my past and real experience ; I am not in any way being paid to comment , I am just tell you my opinion from experience . I am tempted to try these myself to tell the truth , but I wonder how long shaft supplies will be available and of good quality . Best wishes
I remember the Red Dragon Slim Jim's. I always wanted a set of them but could never find them. Anything with specialty stems has the risk of them no longer being made. I'll pick up a couple extra sets of the alloy stems from A-Z Darts for now.
My Slim Jims were given to me by a friend , Darryl , god rest his soul , and I absolutely loved those darts ; shame shaft production messed up . Where I have safely stored them away is a mystery ! Hope you continue liking the M3 dart and thanks for showing them to us .@@WorldwideDarts
Did you order these from the German website? Or do they have a website in English???
Man, these look like they would be fun to throw! There are some nice/unique items on their website. Don't think I'd invest in a new "system" though... As far as repointing, they sell a M3/2BA converter for tips, and using something like the D.Craft mini darts, you can throw that on the back end & still insert the 2BA thread from a repointing machine with room to spare.
Also, pretty sure you could have fit 10 of those barrels into the bull at the beginning! Nice shot!
I'm still not seeing how that would work. I'd need a female M3 converter.
@@WorldwideDarts Rudimentary photoshop skills inbound shortly! haha
@@WorldwideDarts Yup, nevermind... I missed a step! Had to see it in picture form to realize my error. I was using their M3/2BA converter backwards. My bad...
Told ya 😋@@BADThreeXL
Love the review .... but dont think i will be getting a set .. it costs more in shipping than the darts cost to get them to me
Can u use a radar gun to check your darts speed and ultimately ur consistency?
I want to buy one but they're quite expensive and I have no idea if they will pick up on a dart travelling 6 feet through the air.
Maybe someone could use one of those 3d printers to make shafts so long as they did not break any patent ....
Use them for a league
Change the points and you are all set
I can’t throw really thin darts, it’s weird, if it’s about 6.7mm it’s fine, but just dropping to 6.5mm and I just have no grip when throwing
I can't get how you hit anything with the way you pull your arm in and across your chest... You do.. but how is that working??
A severe case of dartitis did me in. I had to stop playing darts completely for quite a while. This is the end result. Somehow I'm still able to put up 90+ averages if I'm playing a lot.
Maybe you can repoint the darts with a adapter or something.
There's a video somewhere here on UA-cam of Peter Wright repointing his darts in the worst way possible with a vice, a piece of wood and a hammer. Might need to do that 😂
@@WorldwideDarts Okay, then I'll check back next week for your next video and I'll be waiting for you with bandages around your hand. Be careful. 😂
Nice one's
They just need to use special points🤔
Is there a way to view the site in English?
Top right... ibb.co/mBFBYqr
I wonder why they don't make 95% tungsten version
What's the cost?
Link in the pinned comment. About 63 euro
For repointing can you just not buy Female/Female standoffs. Hope the threat diameter is not M3 but 2BA like normal shafts. 😊
I'm going to go to the local hardware store and see what I can find. Should be simple enough
Jochen Weissmann himself is actually a pretty good player. He plays in the 2nd Bundesliga, which is the second highest league in the country.
Oh wow! I wasn't aware. I figured he played darts but usually people with shops don't have the time to compete. Thanks for letting me know
@@WorldwideDarts Yeah, he also used to sponsor some big players in the region like Pietreczko (now Datadart) or Unterbuchner (now BULL'S Germany).
@@kirbosparent5863Order my Darts always by Jochen
Great darts do not cost a lot.....how about these darts?
63 euro. Not too bad considering it's a specialty dart.
Nice looking darts but safe not for me😊😊😊
Definitely not a dart for most people but the shop has a bunch of other nice M3 darts 👍🏻
@@WorldwideDarts yes i know them they Dartkiste is a quite poular shop for m3 darts here in Germany
My roommate has them lol
What do they think?
@@WorldwideDarts that’s his game darts, he loves them so much he bought a 2nd set, doesn’t hit a 180 all the time but hit one yesterday. He likes thin light darts, his previous darts where the colonial soft tip 12 gram darts. He’s also a big guy 7’2” lol
@@WorldwideDarts I’d also add he has the bulls repointer and has no problem changing the points.
7'2?!?!? That's MASSIVE!!
The slimmer the better road, feels like cheating in videogames.
Buy 40g brass bombs, pactice your game and get better, so you dont need to throw pencils to hit trebles anymore. 😂
Now Jokes aside. Its a not a bad idea, but the repointing tool needs either some kind of adapter or you need new repointing tool.