where should I place my Denafrips Hermes DDC in the hifi chain, between pc/laptop and the DSP processor (minidsp shd studio) or between the DSP processor and DAC?
7:04 good, but I don't entirely follow. If the Hermes was set to 000 and the DAC at 000, why the trial and error approach? Or is this specific to DSD in order to accommodate the different wiring configuration types of HDMI cables? If it's a cable issue, then if the chosen cable had no signal crossing, parallel wiring (which I think is the Denafrips way), then just setting both to 000 would be the way to go for everything?
Hi Alvin, Great turorial. BTW I have a question. I have a plan to buy Terminator II and Hermes. If I use iPhone (Apple Music/ALAC format) and connect the iPhone to Hermes using Lightning to USB Cable, can the clock synchronize works? Thanks.
Alvin, Very interesting video. I am in the process of possibly buying a terminator 2 this afternoon, from You. I have been looking forward to owning one. As the Terminator 2 is as high as I can go $$ Why would you need to buy the other unit too? What does it do that a $4500 Terminator unit can't. I am truly hoping that the Terminator 2 is an end all addition for me. Plus I was looking for a DAC with Simplicity. Is the Terminator 2 not as good without it??? Robert TN
Hermes, it is the gift which keeps on giving..
where should I place my Denafrips Hermes DDC in the hifi chain, between pc/laptop and the DSP processor (minidsp shd studio) or between the DSP processor and DAC?
7:04 good, but I don't entirely follow. If the Hermes was set to 000 and the DAC at 000, why the trial and error approach? Or is this specific to DSD in order to accommodate the different wiring configuration types of HDMI cables? If it's a cable issue, then if the chosen cable had no signal crossing, parallel wiring (which I think is the Denafrips way), then just setting both to 000 would be the way to go for everything?
I see. so it is a cable issue - referred to in your other video ua-cam.com/video/db3YaZnZcuE/v-deo.html
Hi Alvin, what if I only connect usb to usb (and clock), is that enough? Thanks.
Nice vid Alvin!
Thanks Dave!
Hi Alvin, Great turorial.
BTW I have a question. I have a plan to buy Terminator II and Hermes. If I use iPhone (Apple Music/ALAC format) and connect the iPhone to Hermes using Lightning to USB Cable, can the clock synchronize works?
Thanks.
Hi sir, certainly, the clock sync will work with your desire setup using an iPhone as source. Hope this helps!
Alvin, Very interesting video. I am in the process of possibly buying a terminator 2 this afternoon, from You. I have been looking forward to owning one. As the Terminator 2 is as high as I can go $$ Why would you need to buy the other unit too? What does it do that a $4500 Terminator unit can't. I am truly hoping that the Terminator 2 is an end all addition for me. Plus I was looking for a DAC with Simplicity. Is the Terminator 2 not as good without it??? Robert TN
Hi Robert, TII undoubtedly is a great DAC on its own. I can confirm that :)
Do all DACs benefit from a DDC?
Alvin, thank you very much for this presentation. Would you please enable english captions on this video? thank you.
Let me try to enable the auto CC. I am not sure if it will work though
NICE vid Alvin, Are these test tracks available somewhere?
Thank you. The test tone can be downloaded here: www.denafrips.com/config-i2s
The trick for reversing left and right channels does not work for PCM. How would you reverse the channels for PCM?
Hi sir, please reach out to our technical support at support@vinshineaudio.com. We’ll be able to assist you sir :)
Great video Alvin thank you. Are these test tracks available somewhere?
Thank you. The test tone can be downloaded here: www.denafrips.com/config-i2s
@@VinshineAudio Thanks again Alvin these will be very useful! Hermes and Terminator II arriving tomorrow in Melbourne, Australia.
Does the BIC-500-US goes straight to the house mains?
Yes, then connect each piece of source equipment to the four filtered outlets on the back of the unit.
Hi Rayner, yep. House AC Mains->BIC500-US
The configuration of the DDC is too complicated for me, that why stopping me to purchase . Manufacturer should make it user friendly.
The DAC is all good on its own!
Where to get the clock cables?
Here you go sir: www.beatechnik.com/product-page/digital-spdif-coaxial-cable
where should I put room correction software in the chain?
You may, if you need it :)