Hi, this break easily because you not mix powder first. If you add sand aswell and mix powder before water, it will become much stronger @@BearBearCammy
Try to mix the 2 powders first, then add the water slowly.. if you add pva bonging agent sure the whole mix will be so strong when dried.. just try it.
Heyyyy. I tried my first concrete dish just poured it in the molds but theres a problem; theres water over the poured molds like its water i drained it carefully n theres water over it again, i had the pancake consistency; is that normal? Or what am i doing wrong?
@@aphrodite9267 a layer of water appear is normal. You can leave it like that and sand it off later. Or you can use paper towel to gently soak it. It won’t ruin your concrete :)
@@sameerzaz2250 what type of sand, when I search for white sand in my country, usually the only white sand available is the one used in aquariums and all. Would that work?
@@areejfatima270 it is work if you add some any type of sand and also the process of make mold is very important, do not add water into the powber , first you mix pop and sand then you add this mixture into the water . Ratio is 4 plaster 1 sand
Just a quick tip when mixing 2 different powders. It's easier to mix the dry powders first before adding any liquids to the powder.
Thank you for the tip :)
Hi, this break easily because you not mix powder first. If you add sand aswell and mix powder before water, it will become much stronger @@BearBearCammy
2 powders should be dry mixed before adding water to get homogeneous properties in final outcome.
Definitely 🤝
Thanks for sharing :)
Hi, You had to add sand to bind the whole composition, try the experiment with sand again... Good Luck 👍
Thank you for sharing ☺️
Try to mix the 2 powders first, then add the water slowly.. if you add pva bonging agent sure the whole mix will be so strong when dried.. just try it.
Thanks for the tips!
There are 2 types of plaster. Alpha and Beta. The plaster you used is beta. If you use alpha one you will get perfect result without crack.
😮😮😮 Gesso pedra, caucita, hidrofugante para impermeabilizar, terá um produto muito resistente!
1x1, 1 colher de hidrofugante....
Cement is best choice. Very strong.
I made a small vase with white cement but it broke and not stong
I dont think you made any mistake with the ratio and stuff, plaster just isnt that solid to hold up unlike cement.
Great content btw❤
Thanks for your reply.☺️
Heyyyy. I tried my first concrete dish just poured it in the molds but theres a problem; theres water over the poured molds like its water i drained it carefully n theres water over it again, i had the pancake consistency; is that normal? Or what am i doing wrong?
@@aphrodite9267 a layer of water appear is normal. You can leave it like that and sand it off later. Or you can use paper towel to gently soak it. It won’t ruin your concrete :)
@@BearBearCammy thank u sm, you're amazing ❤💗
@@BearBearCammy one of my dish broke😔idk wat happened. What do i do?
Always ad ciment and plaster to " water " 👍
If I want to make a mold, should I use white cement or plaster?
You need a silicon mold maker to make a mold.
Mix plaster into the watter and use less watter. Ut mixes better
sy pon tgh experimen lg ni.mcm² teknik dh guna tp mmg x mengeras.😢
@@mussqeedal3200 cuba tukar plaster lain. Plaster yg saya guna ni kualiti kicap. Dah tukar plaster baru skarang okey.
I wonder what if u mixed 6scoop of cement and 3scoop of plaster?
Never try that yet but can be try 😉
Actually if u get the mix right plaster and white cement work very well together
I use white cement but for a make-up tray it broke so what can I use to make my mould strong and lasting
Add sand with white cement that will not break
Add gray cement
@@sameerzaz2250 what type of sand, when I search for white sand in my country, usually the only white sand available is the one used in aquariums and all. Would that work?
@@areejfatima270 it is work if you add some any type of sand and also the process of make mold is very important, do not add water into the powber , first you mix pop and sand then you add this mixture into the water . Ratio is 4 plaster 1 sand
@@areejfatima270did u find the right sand i am also looking for it
Or equal parts?
Hi…plaster of paris jual kat mana ye?
Boleh cari kat Shopee ataupun lazada ya.
I did the same mistake, 2:1 than I used 1:1 that was perfect
Thank you. I will try it next time :)