With all due respect, An IES officer should've been there in the place of an IAS officer. That not only would ensure quality, but would ensure efficiency at the same time. And efficiency is what our country desperately needs in order to become a developed country instead of a developing one!!
Wah yaar kya IPS.. faltu ki galtiyan nikal rha hai jo bnda thda stressed hai uski. He seems too confident in finding mistakes. He should boost confident instead of finding mistakes.
You do two things immediately right after you see my comment 1. Diffrence between a IAS and IPS 2. TAke online grammar courses and read newspaper daily..
Its not important if a IAS is qualified for checking this type of engineering work. Its is very important for an IAS to check this work becoz it is public property and very less IAS people check the quality of work on site.
@RationalThinker ur right. SDM belongs to adminstrative department. Civil engineering works is most corrupt area in india and an administrator should check all the technical and non technical process.
Sirji, I am a certified welding engineer. The first thing you must watch for welding inspection is a PWPS and WPS. That would determine the whole scenario. Next time ask the enginner to provide you with the same and make you understand it. Also they lied to you. The cleaner is applied just once. After application of the dye, you just wipe it with a cloth. If you again clean it with cleaner, you are hiding the cracks. However, cracks doesnot mean the welds have failed. You need to refer to right standards to determine that.
When everybody tries to impress the IAS officer..but rather confuses him. Don't know the actual scenario , but these r pure technical field and I think for such inspection trained professionals must be hired. Also don't think fr structural application dye penetration is a reliable method.
Exactly that why state government projects have so much faults because they don't have good post of Engineering responsible for engineering work ya pwd bridge corporation have many works of engineering stills comes under IAS which is wrong all Engineering work of state should be under pwd as they have engineers
Well IAS officer only ensures that the employee's are doing their work properly and whenever they are out to inspect such things they have one member from that field with them.
@@dhiruph with this mentality u can never be an ias officer🙂🙂🙂if u want to be🙂 I m damm sure u will comment some worst, so before commenting introspect why this is given.
He is trying to bully the fitter. At least have humanity and give him time to think and speak. You are acting like a feudal lord of the people. This type of arrogance should not be tolerated.
This IAS is trying hard to justify his existence as an officer even when he doesn't know anything about the job being done. Better to have inspection done by people who are qualified to do so. Publicity stunt is good.
He is cross checking whater the experts are giving correct information or not he have his experts with him it's just to ensure that no one is corrupt and sending the wrong report to the office it is very easy to hire people but you heve to keep a eye on just like you keep on checking everything when you build your house have some respect for him bro in this kind of projects karoro ka gotala happens and later on accedent happen IAS for a reason great man
For ur kind inf let me know u IES is already there Every work is tested at many levels je,Ae, executive and according to tender value (by superintending engg) But since DM is highest authority of all departments in a district he is supposed to give final assent (tech inspection is not his part of job he is a good officer because he's trying to learn all these)
Only NDT Level-II certificate holder can perform Dye Test and sign report on it Shocking that fitter was performing Dye Test. Also, Dye test can only detect surface deformation, UT or radiography is best to detect internal deformation.
Yeah ..that was very unprofessional..Even the Engineers didn't knew the Dye Penetration Test procedure.. There is a huge gap in the education system.. Being an Engineer..I started my career as an NDT Tech
Wrong procedure for dye penetrant test showed to DM Step 1 - apply cleaner/remover and wipe off Step 2 - apply dye on the surface, the wipe off dye with cloth. Step 3 - apply developer, so that dye come out of defect holes.
Thanks to DM that he conducted this kind of genuine inspection but the thing is that as per construction management procedures, the incharge of the site has to conduct this kind of detailed investigation on daily basis. That impatientness and mis conduct of operation shows that the incharge is not doing his job properly at all.
DPT test is surface defect test Principal is based on capillary action 1) step clean the surface 2) apply cleaner and remove by lintcloth 3) apply the penetrant after applying penetrant start progating in to defect area for this 10 minutes dwell time is given the after that again remove the penetrant by using cleaner no penetrant shall be seen on surface so that after applying the developer only penetrant which is progated in defect will bleed out if any defect is seen analysi and repair inspection shall be done by level 11 person
As par the rule ye video banana or kudh ko ese represent krna as officer wrong hi Agr administration chahe to 2 mint me ratwat ki dawat bnwa sakte hi It’s rule
मेरा नाम श्रवण मेघवाल पता- जिला पाली (राजस्थान) सर जी हमारे यहाँ हम सिर्फ यही जानते है की हमारे जिले का DM यह है सिर्फ नाम तक ही जानते है जिले मे मेरे देखने मे बहुत सारे तबादले हुए लेकिन किसी DM shab ने खुद को जिले की जनता से रूबरू नही करवाया.... हम सब जानते है की हर एक इंसान एक जैसे नही होते है लेकिन जब से मे आपको देखता हुआ आ रहा हूँ तो मुझे बिल्कुल लगा है की आपके जैसे जनसेवक की जनता को आवशयकता है सर Reply jaroor dena sir...... I am wait..
Sir, It's was Liquid Penetration Test(LPT), & it required ASNT level- II person. FITTER fit-up the 2 piece of material which is going to weld with proper ASME/API section. A grinder get the finishing of weld with proper safety.
Radiographic testing (X RAY) is recommended for welding inspection. Obviously DPT is inexpensive and available in field condition but it has some limitation as it's principal is based on capillary action. DPT can't detect void in welded joint.
I have worked as quality control engineer in a pipe industry where weld quality is most important aspect and there are various test to check welding quality. DPI is one of them which is used for surface crack . However X-ray or Ultrasonic is most reliable techniques which should be done regularly. And there should be some destructive test like tensile and compressive, flattening to find over all weld quality.
Its a part of NDT... It seems they are in hurry so crack would not be shown or developed... A cycle of this test needs 20 to 30 min time to see the fine line... Perhaps this job(work piece) is not as important other wise they will test it with patience...
Being INDIAN… I’m very sad to say … that … INDIA is great country… theoretically but practically our country is far behind to be a great country… because every one or mostly people are self centric…. Some people like to do buttering and also some people like to get buttered….
Sir fitter checks for fitting of plates. Generally for speeding up process welder and fitter both are pressed to work to utilise maximum efficacy. As welding equipment is costlier (like on site electricity generator and inverter welding equipment) overall cost lowered when used in combination. I think fault check was explained well in last so no comments on that.
What a shear waste of time & resources of the country , does any IAS is supposed to check the engineering technicalities of a construction project? If mr. IAS is so keen to do this , he should have some home work and technical knowledge done before coming to the site. They are just good for behaving like shahrukh khan in front of the camera with zero knowledge and interest about the work. Pity on our system.😏
हरिद्वार पवित्र नगरी में हिंदुओ का पलायन बढ़ता ही जा रहा है, सुदर्शन न्यूज़ चैनल पे भी दिखाया गया। निवेदन है आप वहा के राजा है और और राज धर्म का पालन आप कर जी रहे होंगे, लेकिन दुष्ट पापी लोगो से सनातनी लोगो की रक्षा कीजिए इंसानियत की रक्षा मां बेटी बहन की रक्षा🙏🙏🙏 बुरा लगे तो क्षमा कीजिएगा 🙏 लेकिन विषय बहुत गंभीर है आगे आने वाली पीढ़ी खतरे में है। पलायन किसी विशेष इंसानों द्वारा परेशान मार कूट की वजह से है।🙏
They are not CBI, Why should he go against any political leader he is their to provide administration for the laws and schemes made by govt for people of India. Why people vote for dishonest political leaders, it's the duty of people to unite against those political leaders who are corrupt. Corruption in politics can only be removed by people who vote. But people doesn't have time for thinking and acting for right causes and like to blame officials for their own failures. Most of the people have became selfish , they only think about themselves then how come there will be change and honesty. It must start from the base level. There is a lack of morals in public of our country they only like to play a blame game .
big political leader ? that's where we as a voter to choose a good candidate. we voluntarily elect a corrupted person and later ask the administrative officer to arrest/inspect ?
The dye setting time is 10 min and then the developer time is also 10 min . To properly test for the defects . The engineers on site were acting like a bunch of people in school scared on a practical exam day not like they do it everyday and fit it wrong too!
I work in a public department for the government of Queensland, and have to see my states Premier every now and then. We call her by her name , we never call he MADAM. It is my dream to see India change for good and I hope one day it will.
Best idea to test this is :- by using a light bulb or simple phone flashlight 👍 one man will go inside the box and one will show light from top ... When the light will seen by inner man he has to mark there with chalk , and then weld it 👍 ..... I am a non degree mechanical engineer 🙏 jai hind 🇮🇳
IAS sahab ko bana diya inhone, cleaner dal diya uske upar die daal diya. Itni jamaat khadi yha pe, procedure kisi ko malum nhi. Koi IES bheja hota to ye bewakoof nhi banate
I wonder how much tests they have done before.they didn't knew proper process,welder was not appropriate for that job . Finally the guy who done testing was probably with higher post who fortunately had some knowledge .
He explained 5 times and he still has doubt abay mujhe smjh aa gaya pehli bar mai tht agr koi hair line crack hoga dye usme absorb ho jayegi aur jb third solution marenge toh wo dye bahr aayegi aur pta chl jayega ki welding isnt good thats it ! Kbse lga hai time pass krne🤣
DM RAWATSir,apka dimag apke sawal.wakai dil khus or akal kholnewale h lekin ye officer jo apke charon taraf gud pe makhi ki tarah chipke h inka kaam sahi kijiye taki ye rishwat kha ke apna pet na fula sakein in officers ki aisi taisi kriye
Sabse best video sir ki 4ladko vali hi h 😂😂🙌
Konsi video bhai link bhejo
Bhai sir ki har video best hai
Ha wo computer coaching wala 🔥😂😂
Sai me funny the full
हीरा सुपारी वाला🤣🤣🤣🤣
This is called content creator 😅🤣😂🙏
With all due respect,
An IES officer should've been there in the place of an IAS officer.
That not only would ensure quality, but would ensure efficiency at the same time.
And efficiency is what our country desperately needs in order to become a developed country instead of a developing one!!
Agreed
Yes I agreed...An IES is supposed to check that stff 👋
Yes you are right
Here fitter testing welding test.and grinding..
moreover sir needs to do homework before visiting the sites...
Agreed
Wah yaar kya IPS.. faltu ki galtiyan nikal rha hai jo bnda thda stressed hai uski. He seems too confident in finding mistakes. He should boost confident instead of finding mistakes.
IAS
You do two things immediately right after you see my comment
1. Diffrence between a IAS and IPS
2. TAke online grammar courses and read newspaper daily..
महात्मा गांधी = गाँधीगिरी
नरेंद्र मोदी = नेतागिरी
दीपक रावत = प्रश्न पूछतगिरी 😂
Bhai puchna hi padta hai knowledge aise hi badti hai 🙄
Uttarakhand ke Dalal hai yah sab
Bas pucho sunno kisi ki na
@@DeepuPlayz18 right
Pappu= comedy giri
Its not important if a IAS is qualified for checking this type of engineering work. Its is very important for an IAS to check this work becoz it is public property and very less IAS people check the quality of work on site.
@RationalThinker ur right. SDM belongs to adminstrative department. Civil engineering works is most corrupt area in india and an administrator should check all the technical and non technical process.
Yeah that's very important for our country
Sirji, I am a certified welding engineer. The first thing you must watch for welding inspection is a PWPS and WPS. That would determine the whole scenario. Next time ask the enginner to provide you with the same and make you understand it. Also they lied to you. The cleaner is applied just once. After application of the dye, you just wipe it with a cloth. If you again clean it with cleaner, you are hiding the cracks. However, cracks doesnot mean the welds have failed. You need to refer to right standards to determine that.
Great reply...👌👍 They also performed DPT on final welded built up which is also wrong.
I am certified mechanical contractor & Engineer.....😉😁😂👍
You subscribe krk😂😂
Correct
Also they need UT to identify
Exactly.. Spraying the cleaner on the penetrant directly hides all defects.
3:27 the best part 👍
When everybody tries to impress the IAS officer..but rather confuses him. Don't know the actual scenario , but these r pure technical field and I think for such inspection trained professionals must be hired.
Also don't think fr structural application dye penetration is a reliable method.
Jdm bada chutiya hai
Exactly..
Me too noticed the same..inspite of impressing him they managed to confuse him..every sector has these kind of people.
Very right bilkul sahi likha hai
Dear sir
1 Unsafe activity ,grinder used without safety goggles.
Whenever grinder is used goggles are essential PPE
Yes sir but they people totali wrong not flow safty rule safty faste
Wrong DPT Test
Inspecting an engineering work by an IAS officer will still promote loopholes in work.
Exactly that why state government projects have so much faults because they don't have good post of Engineering responsible for engineering work ya pwd bridge corporation have many works of engineering stills comes under IAS which is wrong all Engineering work of state should be under pwd as they have engineers
Because of stupid reservations.
🤣🤣🤣🤣
Well IAS officer only ensures that the employee's are doing their work properly and whenever they are out to inspect such things they have one member from that field with them.
@@dhiruph with this mentality u can never be an ias officer🙂🙂🙂if u want to be🙂
I m damm sure u will comment some worst, so before commenting introspect why this is given.
He is trying to bully the fitter. At least have humanity and give him time to think and speak. You are acting like a feudal lord of the people. This type of arrogance should not be tolerated.
बड़े अधिकारीयो के पास जाओ
हमेशा गरीब मजदूर और आम आदमी पर ही करवाइए करते हो
3:27😂 ohhhhhhhhhhhhhhhhhhhhhhhh
सब लोग भगवान से🙏प्रार्थना करना हमारे जवान🇮🇳शहीदों की आत्मा को शांति दे🇮🇳🙏🏻🎉
Trinkejo
This IAS is trying hard to justify his existence as an officer even when he doesn't know anything about the job being done. Better to have inspection done by people who are qualified to do so. Publicity stunt is good.
He is cross checking whater the experts are giving correct information or not he have his experts with him it's just to ensure that no one is corrupt and sending the wrong report to the office it is very easy to hire people but you heve to keep a eye on just like you keep on checking everything when you build your house have some respect for him bro in this kind of projects karoro ka gotala happens and later on accedent happen IAS for a reason great man
For ur kind inf let me know u IES is already there
Every work is tested at many levels je,Ae, executive and according to tender value (by superintending engg)
But since DM is highest authority of all departments in a district he is supposed to give final assent (tech inspection is not his part of job he is a good officer because he's trying to learn all these)
That's method comes under NDT i, e Non destructive testing method and this method is know as liquid Penetration method. Very easy but need attention.
Maturity is when you realise this is not the official channel of IAS Deepak Rawat 😂.Just a fan made page
Bhai ye official hai!!!
@@upscjourney-thedreamcalled7628 channel ke about ke jao
Only NDT Level-II certificate holder can perform Dye Test and sign report on it
Shocking that fitter was performing Dye Test. Also, Dye test can only detect surface deformation, UT or radiography is best to detect internal deformation.
Yeah ..that was very unprofessional..Even the Engineers didn't knew the Dye Penetration Test procedure..
There is a huge gap in the education system..
Being an Engineer..I started my career as an NDT Tech
Bhai DM ko kya pta kayse hota hai
Oh to hm engineers ko pta hai n ki test glt kiy hai sb😂😂
Etne pass se spray kiya gya test sb barbad ho gya😂😂😂
@@abhijeetshrivastawa6827 Han...dwell time bhi nahi diya
Yes
Wrong procedure for dye penetrant test showed to DM
Step 1 - apply cleaner/remover and wipe off
Step 2 - apply dye on the surface, the wipe off dye with cloth.
Step 3 - apply developer, so that dye come out of defect holes.
As well as keep 25 cm away from spraying
Wrong procedure for DPT shown
What type of engineering team is it ?
@@mukhtarkhan1538 what's the right procedure then?? Kindly let us know guruji
Cost savings use the same cloth and apply dye before the cleaner is dried off. What a Mucken circus...
Just want to be same officer with this great passion in his work
My class is 12 and I am still loving it
IAS की वास्तविक तैयारी तो ट्रेनिंग के बाद surru होती है😂🔥🔥🔥💯💯🤗🤗🎊🎊🎉🎉
Thanks to DM that he conducted this kind of genuine inspection but the thing is that as per construction management procedures, the incharge of the site has to conduct this kind of detailed investigation on daily basis.
That impatientness and mis conduct of operation shows that the incharge is not doing his job properly at all.
sir ap na mask nhi dala hai corona bapis lana hai kya plz mask dalo 🙏🏻🙏🏻
Plz watch discrimination, it's 2019 video
Main aaj video ka hi intezar kar rahi thi aur video a gai Mera Sunday happy Ho Gaya ❤️🤣
😂❤️
😎😋ha aagi vdo
DPT test is surface defect test
Principal is based on capillary action
1) step clean the surface
2) apply cleaner and remove by lintcloth
3) apply the penetrant after applying penetrant start progating in to defect area for this 10 minutes dwell time is given the after that again remove the penetrant by using cleaner no penetrant shall be seen on surface so that after applying the developer only penetrant which is progated in defect will bleed out if any defect is seen analysi and repair inspection shall be done by level 11 person
आपके पहले जोश भरे कदम से पता चलता है, कि आपकी सफलता कितनी बड़ी होगी ।
Right neha ji
As par the rule ye video banana or kudh ko ese represent krna as officer wrong hi
Agr administration chahe to 2 mint me ratwat ki dawat bnwa sakte hi
It’s rule
Pass ho gya sunte hi sb khush ho gye.. Sir ne pass kr diya🤣🤣🤣🤣🤣🤣🤣🤣
मेरा नाम श्रवण मेघवाल
पता- जिला पाली (राजस्थान)
सर जी हमारे यहाँ हम सिर्फ यही जानते है की हमारे जिले का DM यह है सिर्फ नाम तक ही जानते है जिले मे मेरे देखने मे बहुत सारे तबादले हुए लेकिन किसी DM shab ने खुद को जिले की जनता से रूबरू नही करवाया....
हम सब जानते है की हर एक इंसान एक जैसे नही होते है लेकिन जब से मे आपको देखता हुआ आ रहा हूँ तो मुझे बिल्कुल लगा है की आपके जैसे जनसेवक की जनता को आवशयकता है सर Reply jaroor dena sir...... I am wait..
Sir,
It's was Liquid Penetration Test(LPT), & it required ASNT level- II person.
FITTER fit-up the 2 piece of material which is going to weld with proper ASME/API section.
A grinder get the finishing of weld with proper safety.
Yeah I also a NDT TECHNICIAN.
Next cm of uttarakhand deepak rawat sir....kaun kaun sehmat he is bat se....🙋
Whensoever I watch you, zeal to crack the exam increase multifolds. Best regards and keep rocking.
Questioning is the begining of intiligence sir questions evry thing 😂
Sirr mask🙏🏼🙏🏼🙏🏼
Bhai sardiyo ki vdo h ye😂🤣
2019 ki h check description
Radiographic testing (X RAY) is recommended for welding inspection. Obviously DPT is inexpensive and available in field condition but it has some limitation as it's principal is based on capillary action. DPT can't detect void in welded joint.
NDT
Sir Radiography test is performed on butt weld joints only and these are fillet weld joints...
We want more IAS officer like Deepak rawat sir ❣️❣️🙏
ua-cam.com/video/xHJhnOpfWDU/v-deo.html
He is more like a poster boy rather then being as IAS
This is the problem when generalist(s) go for technical work.
Sir i want to be an IAS like you in future.
Lo bhaiiii ek or prajati 😂😂😂
@@abhipandey4198 Haji bhai lol
Beta study krni padti hai
@@dollartoomuch2950 Tho kisnebola study nahi karna hai? dimak karak hai kya?
Bhaiii dimag sahi se likh le kya ias Banega ve tu....😂😂
IAS is confused and everybody is confused too 🤦🏻♂️. Confusing video 🤦🏻♂️🤦🏻♂️🤦🏻♂️
मै ने तो डाटा भाई नई... साहब आपकी आवाज ही काफी है।
🙏🙏🙏🙏🙏
जय जय श्री राम।
हर हर महादेव।।
🚩🚩🚩🚩
जय श्री राम
It's seems like old video . No body wearing mask
It's 2019 video plz watch discrimination
Karnataka needs an ias officer like u sir god bless u sir
Ravi channanavar is there as ips.. What more u want
@@vivan3996 Duffer, IAS and IPS are 2 different depts. Duffer.
I will suggest u to improve condition at har ki paedi and gAnga ghaat where tourist are more like goons with Hukka and alcohol all the time
I have worked as quality control engineer in a pipe industry where weld quality is most important aspect and there are various test to check welding quality. DPI is one of them which is used for surface crack . However X-ray or Ultrasonic is most reliable techniques which should be done regularly. And there should be some destructive test like tensile and compressive, flattening to find over all weld quality.
Magnetic particle inspection test is also reliable and cheaper. Most important it demands less expertise compared to x-ray and ultrasonic testing.
Its a part of NDT... It seems they are in hurry so crack would not be shown or developed... A cycle of this test needs 20 to 30 min time to see the fine line... Perhaps this job(work piece) is not as important other wise they will test it with patience...
Nice पर आपके पद से सब कि ऐसी कि तैसी हो जाती हैं 🌹🌹🌹🌹🌹🌹🌹🌹🌹
Being INDIAN… I’m very sad to say … that … INDIA is great country… theoretically but practically our country is far behind to be a great country… because every one or mostly people are self centric…. Some people like to do buttering and also some people like to get buttered….
Sari video dak liya ap ka channel ka
Sir fitter checks for fitting of plates.
Generally for speeding up process welder and fitter both are pressed to work to utilise maximum efficacy.
As welding equipment is costlier (like on site electricity generator and inverter welding equipment) overall cost lowered when used in combination.
I think fault check was explained well in last so no comments on that.
What a shear waste of time & resources of the country , does any IAS is supposed to check the engineering technicalities of a construction project?
If mr. IAS is so keen to do this , he should have some home work and technical knowledge done before coming to the site.
They are just good for behaving like shahrukh khan in front of the camera with zero knowledge and interest about the work.
Pity on our system.😏
सर अपना encyclopedia बढ़ाते हैं 😂
और नहीं तो क्या 👍😂🤣
बिलकुल जीवन भाई , पांच रुपया का एक केला भी देंगे न तो video 📸 आयेगा 😂🤣🤣
हरिद्वार पवित्र नगरी में हिंदुओ का पलायन बढ़ता ही जा रहा है, सुदर्शन न्यूज़ चैनल पे भी दिखाया गया।
निवेदन है आप वहा के राजा है और और राज धर्म का पालन आप कर जी रहे होंगे, लेकिन दुष्ट पापी लोगो से सनातनी लोगो की रक्षा कीजिए इंसानियत की रक्षा मां बेटी बहन की रक्षा🙏🙏🙏 बुरा लगे तो क्षमा कीजिएगा 🙏 लेकिन विषय बहुत गंभीर है आगे आने वाली पीढ़ी खतरे में है। पलायन किसी विशेष इंसानों द्वारा परेशान मार कूट की वजह से है।🙏
If this man is truly honest then he must take some action at least one big political leader but never did like this because he is a show-off king. 👍
They are not CBI, Why should he go against any political leader he is their to provide administration for the laws and schemes made by govt for people of India.
Why people vote for dishonest political leaders, it's the duty of people to unite against those political leaders who are corrupt.
Corruption in politics can only be removed by people who vote. But people doesn't have time for thinking and acting for right causes and like to blame officials for their own failures.
Most of the people have became selfish , they only think about themselves then how come there will be change and honesty.
It must start from the base level.
There is a lack of morals in public of our country they only like to play a blame game .
big political leader ? that's where we as a voter to choose a good candidate. we voluntarily elect a corrupted person and later ask the administrative officer to arrest/inspect ?
It's just layman , eating head of professional,so better come with engineer who is technically sound and act mere as supervisor
बहुत अच्छा कार्य कर रहे हैं सर आप, काश हर अधिकारी ऐसे होते🙏
Hai kya ya
हरिद्वार के डीएम
The dye setting time is 10 min and then the developer time is also 10 min . To properly test for the defects . The engineers on site were acting like a bunch of people in school scared on a practical exam day not like they do it everyday and fit it wrong too!
Those engineer who finally become IAS officers, must love this testing or inspection
Sir hamre village मे बार बार लाईट kati jati he 24 houar me 4/5 houar light aati he
परेशान हो gye हे हम me राजस्थाण ke chittorgar से hu
🥺
The most awaited video ,please upload videos of this lenght sir, wishing you a healthy life 👍
Nice sir ji
After seeing the comments, it's good to know that our youth is well versed in their respective field.
No masks...why?
I work in a public department for the government of Queensland, and have to see my states Premier every now and then. We call her by her name , we never call he MADAM. It is my dream to see India change for good and I hope one day it will.
Abhishek ji yeh India h aur uparse shriman IAS h 😂 is janam me to na ho payega yeh change India me.
सर आप 1 बार बिहार चले जाइये वहा के इंजीनियर बहुत भ्रस्टाचार फैला कर रखा है🇮🇳 जय हिंद🇮🇳
Best idea to test this is :- by using a light bulb or simple phone flashlight 👍 one man will go inside the box and one will show light from top ... When the light will seen by inner man he has to mark there with chalk , and then weld it 👍 ..... I am a non degree mechanical engineer 🙏 jai hind 🇮🇳
This kind of test is super flop because crack formed can be complex
That's why u don't know anything about structural things👍
हाहाहा, भाई जुगाड के बाहर भी एक दूनिया है।
Cracks can be very minute, dye pentrant and ultrasound are few scientific way to find them, not torch light.
Deepak sir plz watch this video and share this वीडियो to our वुवा
Toughest time for these people infront of rawat sir 🤣🤣🤣🤣🤣
IAS sahab ko bana diya inhone, cleaner dal diya uske upar die daal diya. Itni jamaat khadi yha pe, procedure kisi ko malum nhi. Koi IES bheja hota to ye bewakoof nhi banate
I wonder how much tests they have done before.they didn't knew proper process,welder was not appropriate for that job . Finally the guy who done testing was probably with higher post who fortunately had some knowledge .
red colour...kesa colour red colour...red colour kesa red colour...sir red is red😂
IAS Hokar mask nhi phna yhi toh haai Hindustan ki Pehchan
Plz watch discrimination, it's 2019 video
Sir for doing this test a qualified NDT TECHNICIAN MUST be present..its not the fitter responsibility after welding...
He explained 5 times and he still has doubt abay mujhe smjh aa gaya pehli bar mai tht agr koi hair line crack hoga dye usme absorb ho jayegi aur jb third solution marenge toh wo dye bahr aayegi aur pta chl jayega ki welding isnt good thats it ! Kbse lga hai time pass krne🤣
Sir's videos inspire IAS aspirants so much
Sir Hum apki Respect karte hai.... Lekin bina Mask ke itne sare sath me ho aap...
Mask Paheniye 🙏🏻
3:54
He : ghabarana nhi .
Worker : * does what he wasn't supposed to do * 4:18
😆😆😆
DM RAWATSir,apka dimag apke sawal.wakai dil khus or akal kholnewale h lekin ye officer jo apke charon taraf gud pe makhi ki tarah chipke h inka kaam sahi kijiye taki ye rishwat kha ke apna pet na fula sakein in officers ki aisi taisi kriye
मै ये सोच रहा हूं कि ऐसे ही सभी अधिकारी क्यों नहीं होते।
How stupid all other officials are … they all speak together in between… no etiquette… to speak one by one….
Most honest officer I have seen .
Ye to video kafe old lagte hai but uplaod ab kre hai bcoz keseke face mask nahe laga huwa hai or winter la mosam hai
Right
Sar aapke Jaisa Sab Adhikari Adhikari aapke Jaisa Sochta to hamare Desh Sudhar jaega Jay Hind Jay Bharat
jiska kaam usi ko sajhe...ab art side vale ko Engineering samjhayoge to yhi hoga😂
Sir aap dhristi IAS sir ke baare me kuch boliye, 2 shabd i am huge fan of him and yours both.
2,4 videos gareeb logo ki dikkat presani ko sunne ki bhi bna lo DM Sahab.
Plzzz sir mein apko bahut time se dhooond raha hoo mujhe apse bahut hi jaroori kaaam h aaap sir bahut logo ki madad karte h meri madad karo sir plzzz
What use of this video educated people skilled in the work are unemployed and unskilled person are employed 👍🏻
This is how contracting works
He is UA-camr or IAS, why this propaganda??😢
ये ग्रांडर चलाने से पहले सेफ्टी गोगल इस्तमाल करना जरूरी है सर यूटी या डीपी यान आरटी सेफ्टी करना अच्छी बात है
Best h sir aap
Mask pehna bnd hogya h 🤣🤣kya
Sir wrong Penetrate testing ho rhi h.
Technic wrong hai.
NDT
Mask lagna jaruuri .. toh sirf public ke liye hai ..
I think this was recorded before Covid19 spread .
Sir aapko dekh ke bruce Lee ki yaad aatai hai itna active or handsome😍 🙏
sir apko koi approved demo video dekhna chayie tha apko kaise pta ye pass hai
Kabhi Up ki haalat bhi sudhr jaye aap jaisa koi accha officer aa jaye
Sir appko kuch samagh me nahi atta wo bata raha hai crack ayega toh ayega
Are sir ek reject wale be check ker ra. Pata to chal Jata red colour kaisa Aata Hai
Sir monetize ur channnel and invest it in your work