Stumbled on this and glad I did- lots of great additions. I had some of these already but picked up a few nice ideas too! The BXpanded backhoe cart was one of the first 1025 accessories I bought in 2016 and although it’s simple it is one of my favorites. Having the flexibility to maneuver the backhoe right into place on the tractor is huge. Love my summit rear hydraulics too!
Saw the level gage you had. Don't need it because I drove a top heavy concrete mixer for nine years and I have a new sense in my brain that tells me the limit I can lean. Discovered this limit when I took a corner at faster and faster speeds until the rear inside tires lifted off the ground short of rolling over the truck.
cool vid im still buying just had my 1025 since march 2022 so far I bought a bx dolly, grapple ,summit 3rd function, tooth bar, front forks and frame, quick hitched over all, snow plow power angle ,i' m going to get some of the things you have hood latch stuff like that, my pocket book isn't like it used to be im retired ? for you is that a Honda dream I saw there
Tractor stuff is an expensive hobby.... Bike is a 72 CB500 with 550 Engine. It's been a rebuild in progress for years. I've owned it for 15 years. I just got the engine rebuilt this year. I still need tires, tubes, chain, brakes before I can ride it. I have a few videos of it running
I use red dye. MT3668 is the deere part number. It's a small jar. I put about half of it In the rear and about 10 drops in front axle with a pipette dropper.
The hooks on the bucket come from Boltonhooks. They were the one of the first and most useful addons I installed. They don't get used as much since I have a grapple but before I used the hooks and chain to move a lot of material out of the woods. Thanks for watching!
Does the higher flow hydraulic pump cause the loader and other hydraulics to be more jerky? I already find the loader to be a little touchy especially when trying to use the pallet forks with any type of load and I don’t want to cause it to be even more jerky or sensitive.
Yeah the loader is scary fast. Flow restrictors could be added to the loader hoses to slow things down though. The Hydrosplus flow divider is adjustable and you could change how much goes through the implement circuit as well. Its very nice to have if you have a backhoe machine though.
Stumbled on this and glad I did- lots of great additions. I had some of these already but picked up a few nice ideas too!
The BXpanded backhoe cart was one of the first 1025 accessories I bought in 2016 and although it’s simple it is one of my favorites. Having the flexibility to maneuver the backhoe right into place on the tractor is huge.
Love my summit rear hydraulics too!
Saw the level gage you had. Don't need it because I drove a top heavy concrete mixer for nine years and I have a new sense in my brain that tells me the limit I can lean. Discovered this limit when I took a corner at faster and faster speeds until the rear inside tires lifted off the ground short of rolling over the truck.
I’m stealing the magnet idea. Lol
The ones I'm using have about 10 lbs pull strength. I find them in dumpster at work. 😎
Same, I’m going to be putting magnets on tomorrow.
Great review,like all the add-ones👍‼️
Thanks for watching!
Funny thing is I actually missed a few accessories somehow. It's like an addiction 😁
I know what you’re saying, me too👍🏻
You have a ton of useful modifications - nice job! Subbed.
cool vid im still buying just had my 1025 since march 2022 so far I bought a bx dolly, grapple ,summit 3rd function, tooth bar, front forks and frame, quick hitched over all, snow plow power angle
,i' m going to get some of the things you have hood latch stuff like that, my pocket book isn't like it used to be im retired ? for you is that a Honda dream I saw there
Tractor stuff is an expensive hobby....
Bike is a 72 CB500 with 550 Engine. It's been a rebuild in progress for years. I've owned it for 15 years. I just got the engine rebuilt this year. I still need tires, tubes, chain, brakes before I can ride it. I have a few videos of it running
I enjoy the video. Thanks.
Lookin Good Brother!
I try to check my hydraulic fluid in the rear of my 1025R but have a hard time "reading" the oil level......any ideas on what works better??
I use red dye. MT3668 is the deere part number. It's a small jar. I put about half of it In the rear and about 10 drops in front axle with a pipette dropper.
@@projectswithjw great idea
Nice vid, where did you get the grab bar on the left side connect to the ROC
Do you mean the handle on the ROPS? It's part of the backhoe package.
Where’d you find those hooks pal? Can’t find that style on Amazon
The hooks on the bucket come from Boltonhooks. They were the one of the first and most useful addons I installed. They don't get used as much since I have a grapple but before I used the hooks and chain to move a lot of material out of the woods.
Thanks for watching!
Does the higher flow hydraulic pump cause the loader and other hydraulics to be more jerky? I already find the loader to be a little touchy especially when trying to use the pallet forks with any type of load and I don’t want to cause it to be even more jerky or sensitive.
Yeah the loader is scary fast. Flow restrictors could be added to the loader hoses to slow things down though. The Hydrosplus flow divider is adjustable and you could change how much goes through the implement circuit as well. Its very nice to have if you have a backhoe machine though.
my forks are jumpy as well I already broke a few things
I had a cl350 made it look like a chopper then sold it
Can you come to my house and do all of these upgrades to my 1025r? Please?!?!
I spent all my gas money on the tractor ! 🚜
What year is your 1025r sir
2020