There are not many real test reports on the Bosch GTS 254. So if you want to know more than just the unboxing, this test is very helpful to make a decision. Thank you very much! 👍🏻
Great video. Thanks also for us foreigners here that don’t speak Tagalog in PH. The subtitles are helpful. I’m considering the 254 for my first year and then maybe upgrading later to the higher end model. Hope to see more informative videos!
Thank you for sharing, very helpful information, based on your video it seems that GTS254 is much better option for DIY use than Einhell or similar. Also thanks for the Eng subtitles!
Great video, was looking at the GTS254 but maybe I’ll save up some more money for a 10J or 10xc. I know the English Subs are probably a lot of work but they are greatly appreciated.
First of all, thank you for this wonderful video. I was wondering if needed to be compared with Bosch GTS 635-216 and Erbauer ETS1500 which one would you prefer? Many thanks...
hi sir! im sorry but we dont have those models here in the philippines. im not familiar with Erbauer ETS1500. But if looking for a brand, check the warranty they offer and check if theyre near you. thanks!
Dear @@RoiDiola, first of all thank you for your kind reply. If needed to compare bosch gts 254 vs bosch GTS 635-216, which one would you prefer? I'm especially concerned about the sound, durability and the precision. Thanks and regards
boss nabili ko na rin sa wakas yan bosch 254, hnd ko lang alam paano i-adjust ang reving knife nya, hnd kc parallel don sa blade, hope matulungan mo ako paano. thanks
Hangang ano lapad kaya neto i-rip cut? Sa manual 545mm parang may nag review ako napanood sa youtube pwede pa daw maiadjust para mag cut ng mas malapad pa ng konti.
Hi sir Roy, Ihave the same kararating lang, medjo nahihirapan ako mag adjust sa blade para magng 90 degress exact, loosen lang ba yung allen nut at ipush? matigas kasi. Thank you
@@RoiDiola yung para po ma perfect square yung blade, illoose po ba yung red na handle at yung black na nut sa tabi? medjo matigas po eh, bumabalik. need po ba iforce ng kunti?
Sir roi... mkaka bevel cut din ba ? 45degrees..? Mkaka gawa din po b ako ng mga octagon shleves? I have 10k on hand.. plano ko miter saw. . Nakita ko po ito nsa 12k plus lang.. gusto konlang po ma sure na mgagawa ko small project ko jan. Salamat po ng mArami. Morw power...
Kaya yan ng hardwood. Kung lotus na 1800hp din kaya yung maple, walnut, acacia mahogany eto din kaya din. Palit lang ng blade na 24T prefably freud industrial LU87R010 cuts like butter.
Additional; The table saw is not soft starting. so be careful when turning it on. You can adjust the fence by the 2 screws at the top and the knob on the furthest end of the fence. if you have other questions feel free to comment. thanks!!!
Madali lang mag-add ng soft start na circuit. Baka lang ma-void yung warranty. Pero baka kayang mai-lagay without altering the original wiring if it uses terminal blocks instead of direct connections.
Sir Roi ask ko lang pano i adjust yung exact measurement pag ginamit na yung main fence?nung tinanggal ko na yung accesory fence may discripancy na ng 1 cm, hinahanap ko pano sya mai adjust. Salamat po sa sagot😊
There are not many real test reports on the Bosch GTS 254. So if you want to know more than just the unboxing, this test is very helpful to make a decision. Thank you very much! 👍🏻
Great video. Thanks also for us foreigners here that don’t speak Tagalog in PH. The subtitles are helpful. I’m considering the 254 for my first year and then maybe upgrading later to the higher end model. Hope to see more informative videos!
1st pinoy reviewer of this model, tnk sir Roi.
Rs
Pero..pwede narin sya..pang DIY at personal use lng....at medyo pasok narin naman sa budget..
Boss, ung tinuro nyo pano maging smooth paggalaw s fence, accurate p rin po b? Hirap sukatin kc.
This Bosch Table Saw 254 is Enough to all Diyer woodworker superb design
True!
Good video, 254 Bosch and Gts 10j which is better?
Good day Sir..ano po ba ang magandang blade para circular saw pang diy lang ilang teeth po maganda.Salamat and keep safe
sir roy, tanong ko lng po kung na aadjust ba yung vertical cut nya hindi nakasi pantay yung sakin gts254 din, or dalhin ko nlng sa service center
nice becoz of this i ordered. my soon to be first table saw for my DIY. pagod na ako sa circular saw ang bigat. nakaabot pa ako sa limited stocks nya
Nice sir! Goodluck po!!!
sir yung ruler nya. acurate po ba sa sukat? yung zero po ba nya sakto sa blade? salamat
Sir kelan po magkakavideo about planer
Is that guide parallel to blade when you lock it on? Or you have to adjust it?
thank you sir as video. Tanong ko sir kung paano i-adjust yung blade na tabingi, 1/16 sa harap compared sa likod relative sa fence or sa slot.
Message nyo kami sir sa fb.com/roidiola sir ng pic.
mas okay ba yan boss compared sa lotus 1800x?
Thank you for sharing, very helpful information, based on your video it seems that GTS254 is much better option for DIY use than Einhell or similar. Also thanks for the Eng subtitles!
Glad it helped! Goodluck!!!
Boss roi saan po pwedeng makabili niyan.ty po.
Inaabangan ko na to pa davao city kaso wala pang stocks
In fairness malinis sir Yung cut nya at palagay ko sulit na sulit sa presyo
UPLOAD KA LANG LAGI VIDEO LODS ABOUT SA TOOLS, PARA MAY TUTORIAL AT GUIDE AKO ONCE MAKABILI NG MGA TOOLS. SALAMAT
Great video, was looking at the GTS254 but maybe I’ll save up some more money for a 10J or 10xc. I know the English Subs are probably a lot of work but they are greatly appreciated.
It is. But its fine. Reading comments that are not my language is greatly appreciated. Yea, if you have the budget. Go for the 10j or 10xc.
First of all, thank you for this wonderful video. I was wondering if needed to be compared with Bosch GTS 635-216 and Erbauer ETS1500 which one would you prefer?
Many thanks...
hi sir! im sorry but we dont have those models here in the philippines. im not familiar with Erbauer ETS1500. But if looking for a brand, check the warranty they offer and check if theyre near you. thanks!
Dear @@RoiDiola, first of all thank you for your kind reply. If needed to compare bosch gts 254 vs bosch GTS 635-216, which one would you prefer? I'm especially concerned about the sound, durability and the precision.
Thanks and regards
boss nabili ko na rin sa wakas yan bosch 254, hnd ko lang alam paano i-adjust ang reving knife nya, hnd kc parallel don sa blade, hope matulungan mo ako paano. thanks
Sali kayo sir sa bosch user group philippines sa facebook sir. May nagpost po na ganyan din. Naayos po doon.
@@RoiDiola ok na pala sir,salamat
Sir roi pwede b yan sa hardwood.
Hangang ano lapad kaya neto i-rip cut? Sa manual 545mm parang may nag review ako napanood sa youtube pwede pa daw maiadjust para mag cut ng mas malapad pa ng konti.
Baka po dumulas ang fence. Kapag inadjust pa ang kapit.
Nice Sir sa review ng TS na BoschforBigBoy sana mas discount card n freebies hehe! Keepsafe n GodBless👍😇
Sir Roi pwede ba 5/8 arbor na mga 10" blade jan. Sa specs kasi nakalagay 25.4mm
Hindi po pwede. Kailangan po 25.4. May mabibilihan naman po kayo ng adaptor sa lazada.
STANLEY SST1801 or ito ano mas maganda boss? Hehehe bibili sana
Stanley sst1801, para ka na ring naka 10xc.
boss roi saan po pwde bumili nyan walk in?
IPA 100K NA YAN SI LODS HEHE, DON'T SKIP ADS DIN
I would like to buy this Bosch circular saw. I would use it as a hobby device. Do you recommend him to me. Will it be good for hobby jobs?
Yes i would. We use this for jobs and its not breaking down on us. Its a nice brand.
Sir roi kaagano kataas ang blade kapag 3/4ang icucut nya newbie lang sa table saw
25mm.
Hi sir Roy, Ihave the same kararating lang, medjo nahihirapan ako mag adjust sa blade para magng 90 degress exact, loosen lang ba yung allen nut at ipush? matigas kasi. Thank you
Saan po banda?
Yes. Loose nyo lang po allen nut nya and pati yung sa pang 90 degrees sa baba po.
@@RoiDiola yung para po ma perfect square yung blade, illoose po ba yung red na handle at yung black na nut sa tabi? medjo matigas po eh, bumabalik. need po ba iforce ng kunti?
boss roi saan kayu nakabili ng table saw nyo na yan, at mgkano ang range dito sa pinas thanks
bosch concept stores.
Paan pag align ng blade? GTS 254
Sir sa tingin mo pwede na ba yan sa mga non pro na karpintero
Yes po! Pang diy po.
Maximum thicknes ang kaya niya ?
Wala po ba sya kasamang miter?
How flat is the table sir Roi? Salamat po. :)
Sir roi... mkaka bevel cut din ba ? 45degrees..? Mkaka gawa din po b ako ng mga octagon shleves?
I have 10k on hand.. plano ko miter saw. . Nakita ko po ito nsa 12k plus lang.. gusto konlang po ma sure na mgagawa ko small project ko jan. Salamat po ng mArami. Morw power...
Yes. Pwede.
@@RoiDiola ok po sir.. out of stock ang bosch. Stanley po TS pde n pp ba?
@@RoiDiola mas mahal onti sa bosch.. nsa kulang 14k po
Sir roi saan store makabuy ng ganyan model gts254 worth 12300 pesos
madami po sir e. check nyo lang po yung bosch near me.
tapat na ba yan boss roi?...wala ng tawad? 😁
sir roi maingay nga ba ang gts254? sobrang ingay kse sken kumpara ng bosch sliding mt ko.
Maingay sir. Lalo kung close space kayo.
@@RoiDiola ganun nga ba tlaga yon? Compared sa dewalt kya?
@@antoniodismas9752 di ko pa po nattry ang dewalt sir e. Pero kung gusto nyo talaga ng tahimik e bosch gts 10xc po. Tahimik yun sir.
Ayos lng yn sakin kesa mag convert ng cs to ts. Basta powerfull motor(di sirain)
1800watts sir. Parang sa 10j. Hehe
@@RoiDiola kaya nga idol. Slight probz lng cguro kung meron man. Next month ako naman bibili niyan haha
Where available?
worth it ba sir? diyer lang naman ako
Super!!!
Hi sir saan po ang service center ng Bosch?
Location nyo sir?
Ayus Sir... Ganda 😍
Pano umorder nyan idol
saan mo po nabili? may link ba or address kung saan.
Nearest bosch concept store.
Pekjihoi lah meninoy
san available yan o makakabili.?
Mahal kasi yung setup kasi it has to be done manually. It is one way to reduce the price.
Thanks for the review. Greetings from Indonesia.
Welcome sir!
@@RoiDiola does your table insert flush with the table ? Mine is slightly higher by 1-1.5 mmm
Nope. But its fine. That wont be a big deal.
Sir Roi saan po rayo maka order niyan dito sa cebu
bosch store near me. search nyo lang po yan sa google.
Kaya ba 3/4" marine ply? Thanks.
Kayang kaya yan sir.
@@RoiDiola Thanks! Akala ko forever na out of reach na yung decent na table saw. Gastos na naman ata. Hehehe.
I want this one now
Salamat sa video a ito lods
Magkaano yan
This or the Lotus table saw?
Eto siempre. =)
Nasubokan mo na sa hardwoods or usual woods ?
Melamine board lang sir.
Nde ba sir kaya ang mga good lumber or like mahogany wood nito?nagorder pa naman na ako neto..
Aluminum b yung top nya?
yes po
Great!
Thanks po ...😍
pwede dado stack sa GTS 254 ?
hindi po.
Kaya ba nyan ang mga hardwood?
Cabinet saw for hardwood sir.
Kaya yan ng hardwood. Kung lotus na 1800hp din kaya yung maple, walnut, acacia mahogany eto din kaya din. Palit lang ng blade na 24T prefably freud industrial LU87R010 cuts like butter.
nice video po sir
Hangandaaaa 🤩
Totoo yan sir.
Bili kana nyan isko ! 😁
Nice.
Wow 😳
Sanaol
ubos ang stock nyan, marami na kami ask na seller lalo pa`t malapit na 8`8
Sorry to hear sir. Yaan nyo po kausapin ko sila.
Additional;
The table saw is not soft starting. so be careful when turning it on. You can adjust the fence by the 2 screws at the top and the knob on the furthest end of the fence.
if you have other questions feel free to comment. thanks!!!
Wala paring stock.........whaaaaaaa whooooo
malakas ba ingay nya
Madali lang mag-add ng soft start na circuit. Baka lang ma-void yung warranty. Pero baka kayang mai-lagay without altering the original wiring if it uses terminal blocks instead of direct connections.
@@aljo6912 wala pong soft start. Hmm. Malakas sa umpisa. Nakakagulat. Hehe
Sir Roi ask ko lang pano i adjust yung exact measurement pag ginamit na yung main fence?nung tinanggal ko na yung accesory fence may discripancy na ng 1 cm, hinahanap ko pano sya mai adjust. Salamat po sa sagot😊