How to Replace Front Lower Ball Joint 2004-2008 Acura TL
Вставка
- Опубліковано 24 тра 2022
- Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASBJ00347
Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 2004-2008 Acura TL.
This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL
Tools you will need:
• Impact Screwdriver 1aau.to/oa/1AXAA00047
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 17mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 14mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 36mm Socket 1aau.to/oa/1AAST00006
• Ball Joint Press
• Blowtorch
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Side Cutters
• 3/8 Inch Air Impact Gun
• Air Chisel 1aau.to/oa/1AXAA00270
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Cotter Pin
• sanding disc
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
Subscribe: / @trq
Check out our playlist:
Acura TL 2004-2008 3rd Generation: • Acura TL 2004-2008 3rd...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
No mf way that ball joint popped out that easy I’ve been beating on this damn ball joint like my life depends on it
Can you show how to take the ball joint sleeve off the old ball joint? Also I don't think you need to take the hub out
Hub doesnt need to come out (at least on my 07 type s) just remove the round retaining clip on the back that sits behind the abs sensor
Yea i followed this, and both of mine came out with the LCA sleeve so now i need to buy 2 LCA’s along with this because i cant get this sleeve off the ball joints
Good video, you just forgot to show bolting the the strut back on, you can see it not attached in part of the vid.
Why wouldn't you show how to remove the sleeve that came off with the balljoint....
What’s the upper ball joint torque ?
You don’t have to take out the hub for the ball joint… that was just extra work.
+Jaleer Stiger We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
You show nothing about the lower ball joint sleeve...
That’s what I’m sayin.. he completely skipped the most important part.. how tf did he get the sleeve off the ball joint to re use it?
Homie left the forks off
Question in your video shows thats not right ball.joint
Trq parts don't interchange.
Not too experience imo
Very bad video you do not need to take the hub out to replace a ball joint just that ring . Smh
You are misleading people that's dangerous
Rookie way to break away ball joints