Hi Thomas, I am an old guy from Holland. We have a lot of water but nothing compared to nature in New Zealand. I also have a sailing boat en without sails and mast we go to the islands and also in shallow waters. I enjoy your videos. You are very handy and very versatile. Keep it up. Greetings from the Netherlands
Lol man.. thats rough atleast you guys were okay and got the boat out, pretty crazy you found the gopro as well. Those little jet boats look like a load of fun. Im mildly land locked where i live and have 0 welding abilities (my work looks like your manifold(no offense)). However i kinda think i might have to get one.
I've regularly rafted this river and that particular rapid has produced quite a few unexpected flips at low flows. A bit higher flow is usually better all round
Hola, vi tu diseño, y me gusto, yo quiero hacer una lancha parecida a esa, me podrías responder una consulta, que medidas usastes para hacerla, y que peso tiene, además cuanto peso soporta, gracias
I made some flat bottom boats that work great in rivers use a longtail motor that just bounces off the bottom. They don’t like rocks though lol. Do you think a jet unit would work ok in a flat bottom boat. Also I work in an engineering workshop and I would like to make the jet unit , would need some advice though!
Thanks man I like that I would love to get the Plans on one of the boats I do all my welding cutting well Fabrication work my self I Never tried to make one of them But man I would love to Thanks
just started to watch... looks like the go-pro swamped, with a helo out ?? - Great tunes always, Thomas! relly good. and Not just blow'n smoke here, But You gotta Be one of the Best pilots i've seen- Seriously, serious skills. ~ I want you to come state-side and roll-out my (our?) line-up. BTW... the reason you swamped, is... yur good bud, is way-slow off the mark. period! I guess he prefers to swim? and suppose he paid half the Helo service, right? Which is how much, american usd... for how far, and how low did it take, round trip? thanks brother! Always enjoy your vids!
Hey mate, cool to see a little bit into who you are. Was that the Blue Pool at 20.55 at Cameron Flat? Also, you didnt answer my question to your las vid, where have you been for the last 3yrs, you just drroped off the face of the earth lol.
That's what I was thinking. I don't even think I could find a MD500 to do the lift where I live, heli wouldn't even be an option, but pretty cool to see them do it, gotta be a smooth pilot to get the boat out without dragging the heli down.
Not boat related, but what brand rotary are you using? My father sells the "roto flo " brand here in the states. The one that floats on water and if i remember the owner is from New Zealand. Oh by the way I watched your videos on how to build a jet boat at least 6 times and its what got me into wanting to build one. Just not money or space to build it right now😖. Any ways like the videos keep them coming please.
Chao and toi o canada toi dang cho may mien nhom toi day laser cut ve, khi nao ve toi ,toi se goi hinh trong quality trinh han cho anh xin loi nhe tieng viet cua viet sai chinh ta
Hey Thomas, do you watch and listen to your videos before uploading? Should start, imagine you have def. lost some sales because of the quailty of videos. Just saying, im a customer, will be again....but should try clean up your vids.
how so? whadda you mean granted, as a yankee, the dialect and accent is tough to get first time thru... especially if some background noise. but what needs work?
Hi Thomas
Your custom jet boat idea really made many to experience the thrill.. 😊🛥️ Thanks
Many thanks for the look at your life and likes , wonderful enthusiasm and engineering, great country too.
I still got videos saved from your first UA-cam videos. I love your boats!
Hi Thomas, I am an old guy from Holland. We have a lot of water but nothing compared to nature in New Zealand. I also have a sailing boat en without sails and mast we go to the islands and also in shallow waters. I enjoy your videos. You are very handy and very versatile. Keep it up. Greetings from the Netherlands
Just found your channel this is my first video of yours it about 5:00 AM in California big shout out great video and thanks for sharing 👍👍👍👍
Glad your back! 2 of us been obsessing over these boats for months!! Questions about it coming!
Great to see you back gona email you right now from Canada
looks like loads of fun a big hello from the us
Greetings from North Yakutia (Siberia). Very interesting video))) Liked and subscribe)))
Lol man.. thats rough atleast you guys were okay and got the boat out, pretty crazy you found the gopro as well. Those little jet boats look like a load of fun. Im mildly land locked where i live and have 0 welding abilities (my work looks like your manifold(no offense)). However i kinda think i might have to get one.
I've regularly rafted this river and that particular rapid has produced quite a few unexpected flips at low flows. A bit higher flow is usually better all round
Thought that boat was coming out under a 500😍goodshit...
Great video. I live in Aus NSW . Would love to get your plans. Just need a good welder.
Nice job man
Hola, vi tu diseño, y me gusto, yo quiero hacer una lancha parecida a esa, me podrías responder una consulta, que medidas usastes para hacerla, y que peso tiene, además cuanto peso soporta, gracias
Just spent over a grand on quadcopters and already I kind of want to add this to my list of expensive hobbies.
nice ya got it back, pcw5000 would have done it, but yer there 2500 new" 1000 for the chopper i think pretty good, cheers keep makin em bro"
What if you put foam flotation in the hull It night sink as far as it has?
En helicóptero te la auxiliaron? Huoooooo en qué país vivía bro, te felicito. Que suerte de vida
I made some flat bottom boats that work great in rivers use a longtail motor that just bounces off the bottom. They don’t like rocks though lol. Do you think a jet unit would work ok in a flat bottom boat. Also I work in an engineering workshop and I would like to make the jet unit , would need some advice though!
uss inbiàr or outbard jet
Nice watching
Thanks man I like that I would love to get the Plans on one of the boats I do all my welding cutting well Fabrication work my self I Never tried to make one of them But man I would love to Thanks
just started to watch... looks like the go-pro swamped, with a helo out ?? - Great tunes always, Thomas! relly good. and Not just blow'n smoke here,
But You gotta Be one of the Best pilots i've seen- Seriously, serious skills. ~ I want you to come state-side and roll-out my (our?) line-up.
BTW... the reason you swamped, is... yur good bud, is way-slow off the mark. period! I guess he prefers to swim? and suppose he paid half the Helo service, right?
Which is how much, american usd... for how far, and how low did it take, round trip? thanks brother! Always enjoy your vids!
Hello Thomas, your videos have got me wanting a boat like this for several years now. Do you know of any builders or suppliers in the United States?
Jet stream or mini jet in canada
@@mikee2398 australia
If you get the plans you can go to any metal shop or sign shop that had a CNC router table they charged about 100 per sheet you can then do your build
where is this
You are a champion for retrieving that camera! Where is that email address for plans for the new boat?
thomashewittv8@hotmail.com
Safety squinting, nice one.
Can u Show US the engine room ? I will see how u build the muffler in that housing
Is the overview on the new design and changes coming in the next video?
Bloody crackup bro, besides the mishaps its a dinky lil beast
Wow, been a long time since we heard from you! I actually built a zx10 boat as well but dropped a valve first run out on the water. 😂
What is the engine and pump/intake specs. It was hard to hear what engine you said.
Where have u gone
Hey mate, cool to see a little bit into who you are. Was that the Blue Pool at 20.55 at Cameron Flat? Also, you didnt answer my question to your las vid, where have you been for the last 3yrs, you just drroped off the face of the earth lol.
Rob I was going to ask the same, yeah I reckon it is the scene upstream from the bridge.
Have you ever tried it in the sea?
legend
Do you sell plans for these boats ?
مرحبا اود اشتري واحد كيف اتواصل معك
Hi Thomas, may I ask how much would a small jet boat cost.
ßae orncé ta hàlf óf íçníç biàt yàvvh diiàlw hwtß
Cool...👍🏻
Holy shit you hired a Helo 😃🙋♂️👍
Only $1000? Heck you got lucky. Here in the states it would have been like $10k just to think about it.
That's what I was thinking. I don't even think I could find a MD500 to do the lift where I live, heli wouldn't even be an option, but pretty cool to see them do it, gotta be a smooth pilot to get the boat out without dragging the heli down.
Not boat related, but what brand rotary are you using? My father sells the "roto flo " brand here in the states. The one that floats on water and if i remember the owner is from New Zealand. Oh by the way I watched your videos on how to build a jet boat at least 6 times and its what got me into wanting to build one. Just not money or space to build it right now😖. Any ways like the videos keep them coming please.
It was a road bike engine zx10 Kawasaki
Think he’s talking about the the cow rotary bro
How much it costs To build one like everything you Need for it
Hey Thomas you didn't leave your email, would love some plans always wanted to build a jet boat and keen as... Would love a pla...
You can watch his past videos and it has his email when he actually builds one of these boats
thomashewittv8@hotmail.com
Hi Thomas, I like pretty much you project and I would like to contact you as well as the mate abvove
Helo tôi o vietnam tôi muốn mua sản phẩm cua bạn tôi rất thích nó tôi phai làm sao ???
Chao and toi o canada toi dang cho may mien nhom toi day laser cut ve, khi nao ve toi ,toi se goi hinh trong quality trinh han cho anh xin loi nhe tieng viet cua viet sai chinh ta
Hi Thomas any chance to get drawings for that boat ?
To make one myself 😁
#Polsky_Dave you just need to email him for plans. Did you even watch the video?
Yes email me at thomashewittv8@hotmail.com
Can I ask you questions please
Why do I want to speak with you about the possible field .I follow you from Egypt
Wow
thats awesome, you make it looks so easy, damn maybe i build one, nah both my hands grow out of my ass
Are those GI Joes or is that Race Bannon and Dr Quest?
have ya ever been out salt in it?
the COWS know the Routine!! So Great !
Not hard to work out why salmon numbers are through the floor this season.............
круто
👍🚀
Some of the best engineers I know are farmers by trade, not engineers.
wérng e geries beßt ebeis nkt fares
where tf did you get a helicopter lol
مرحبا اود واحدة من القارب النفاث
Why is a road bike engine a bad idea? Then it would be a 6 speed
Hey Thomas, do you watch and listen to your videos before uploading? Should start, imagine you have def. lost some sales because of the quailty of videos. Just saying, im a customer, will be again....but should try clean up your vids.
how so? whadda you mean granted, as a yankee, the dialect and accent is tough to get first time thru... especially if some background noise. but what needs work?
Oh bollocks,damn unlucky
1000$ or no boat lol
Orsum.!