Це відео не доступне.
Перепрошуємо.
Mercedes Sprinter - How to Change Tyre
Вставка
- Опубліковано 17 бер 2020
- How to remove and install the spare tyre on a Mercedes Sprinter 2007 - 2012.
Disclaimer:
This video was created for informational and educational purposes only. I cannot guarantee against the improper use or unauthorised modifications of this information. No liability for property damage or injury incurred as a result of any of the information contained in this video is assumed. Use this information at your own risk. I recommend safe practices when working on any vehicles and with tools seen or implied in this video. You are using the information and automotive parts shown in this video solely at your own risk. It is not intended to be a substitute for the professional advice of a service centre or mechanic.
Thank you! This was the best video explanation I’ve seen
Appreciate it! Thanks.
Obrigado amigo…. Ótimo vídeo!
Saudações do Brasil 🇧🇷
Good if you want to change the rear tyre but what about demonstrating the front jacking points?
Its exactly the same, there is an identical lift point on the chassis at the front. Look in the wheel arch of the front wheel inside on the chassis rail, you will find it there.
Very well explained.
Thank you!
Nice video auto buddy!
Thanks!
Nice one thanks mate!
Thanks!
Is the removal of the spare tire the same for the mercedes 316 CDI?
If its a single wheel rear axle van then yes it will be the same.
Buen vídeo, enhorabuena gracias.
Thank you!
Thank you
Your welcome!
Thanks!!!!
Thank you so much!
Thank you for the comment!
What toque spec did you use?
It ranges between 190Nm - 240Nm. Please check what wheel setup you have. This particular Sprinter called for 240Nm
Goot-en-tight
Where in my van do I find the block of wood the jack is sitting? 🤔
Thats not part of the kit, you do not need the block of wood. The area i jacked up thr vehicle required it hence why it was used
And change în face??
Not sure what you are referring to.
Please dont to underneath the car when there is just the jack and no extra support. You can literally die.
Correct. This is why you see us removing the spare wheel before jacking up the vehicle and removing the wheel/ tyre. You must also ensure the new wheel is installed on the vehicle before attempting to put the spare / removed wheel in the cage.