Hyundai Elantra N/ 1st Oil Change

Поділитися
Вставка
  • Опубліковано 25 жов 2024

КОМЕНТАРІ • 28

  • @klintkennedy6136
    @klintkennedy6136 Рік тому

    awesome video bro keep them coming

  • @12thmannate
    @12thmannate Рік тому +1

    you make great content man. Thanks!

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      Thank you Sir! I very much appreciate the kind words🙂👊

  • @richm658
    @richm658 Рік тому +1

    FYI....Quaker State Euro LX 0W/30 does not meet Hyundai's recommended API service rating of SN Plus or newer (SP) rating. In addition per the manual if using oil that doesn't carry the recommended rating your change intervals are cut in half. The additive package in SN+ and SP rated oil have some specific additives that are quite beneficial to our forced induction engines.

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      You are welcome to run whatever oil you like. It's been working just fine for me! 👍

    • @johnmpifer
      @johnmpifer 2 місяці тому

      Which additives, specifically, would those be? I'm very curious.

  • @uutube243
    @uutube243 Рік тому +2

    Notice your engine compartment is filthy. Outside perfect. I’ve owned three Elantra N’s. Two had this problem. The newest N has a different seal around the hood eliminating this problem.

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      Yeah It has been non stop raining for past couple weeks!😩 I have seen other guys talking about the seal on the hood beeing a problem. Nothing a good wash won't take care of😎👊

    • @johnathansmith1003
      @johnathansmith1003 Рік тому

      @@N-Krazy1976 Or just buy the seal.

    • @N-Krazy1976
      @N-Krazy1976  Рік тому +1

      @@johnathansmith1003 Buy the seal from where?

  • @johnmpifer
    @johnmpifer 2 місяці тому

    Curious what ramps you're using. I just bought a 2024 Elantra N. I have Rhino Ramps, but the approach angle is too steep for the Elantra N. Might have to use some boards in front of them.

    • @N-Krazy1976
      @N-Krazy1976  2 місяці тому

      I made some custom ramps from 2"x10" boards 😁

  • @drsnowmon
    @drsnowmon Рік тому

    At 9:45, it looks like you are still running the factory engine mount. Please change that for your next video

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      It is factory mount with aftermarket Powerflex Bushings.

  • @delasmoo
    @delasmoo Рік тому +1

    HI! What does that electronic plug that you unplugged control?

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      Hey Man, Im guessimg it could be oil pressure.

  • @hectoribarra8473
    @hectoribarra8473 Рік тому

    I notice you have the powerflex purple bushing. Do you notice any difference from stock, any vibrations difference?

    • @N-Krazy1976
      @N-Krazy1976  Рік тому +3

      Hey Man, I would deffinately recomend them I really don't feel much vibration difference at all from stock. But the launch is much smoother. And the combanation I used is great for a daily driver. 😁👍

  • @demoyswaby5255
    @demoyswaby5255 Рік тому +1

    At what Kms did u perform the oil change?

    • @N-Krazy1976
      @N-Krazy1976  Рік тому +1

      Oil change was done at 5000km😁👍

  • @delasmoo
    @delasmoo Рік тому

    The crush washer has a flat side and a curved side. Should the flat side face inwards toward the pan, or should it go outwards toward the head of the drain bolt?

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      Hey Man, I would put theThe flat siide towards the pan.👍

  • @delasmoo
    @delasmoo Місяць тому

    What is the hieght of your car ramps?

    • @N-Krazy1976
      @N-Krazy1976  Місяць тому

      I made them myself amd I am not sure of the exact height. I would have to measure them but I would guess about 10" or so

  • @delasmoo
    @delasmoo Рік тому

    Where did you buy the Quaker State 0W-30?

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      I am in Canada so I got it at Canadian Tire😁👍

  • @noobwow2009
    @noobwow2009 Рік тому

    Seriously you need to unplug that sensor for every oil change???
    Dumass design and it’s going to fall apart after 10 oil changes😅

    • @N-Krazy1976
      @N-Krazy1976  Рік тому

      You dont have to unplug it I just found it gave me more room for the oil filter wrench I was using. Thank you for checking out my video hopefully it was helpfull.😁👍