Відео

I appreciate that Brother! Hope your enjoying your N. They are great Cars 💪 I have not uploaded a new video in quite sometime but stay tuned 😎

Hey Brother, Sorry I have been absent from uploading for quite sometime. Sadly life has gotten the better of me this summer with house renovations 🫣 I do have some parts on order and will be posting a few new videos of the install and review hooefully pretty soon. Stay tuned 😁

I made them myself amd I am not sure of the exact height. I would have to measure them but I would guess about 10" or so

Yes Sir I did end up removing mine do to the same problem 🫣 To much force from the shock.👎

@@N-Krazy1976 That's too bad. Was a great idea and wished it worked out.

@@napoleons.lumasag8141 Ya me too Brother! 👊

I beleive they should work in a 2024

Luckily I have no interior creaks at all 👍

I made some custom ramps from 2"x10" boards 😁

Resonator delete and a couple other goodies but still on stock tune.

Some parts are definately interchangable 👍

Definately worth it! It won't void the warranty because it is post emisions. What I mean by that is anything after the catalytic converter is safe to mod with out voiding warranty 👍

Sorry for late reply. The window visors were put on from the dealership when I purchased the car. They were from Hyundai Canada website.

I took off my drivers side and only use one srut on passenger sde and it works fine. As far as getting the nut out of hood you could try a magnet but you mite loose it in the hood. I just left my stud in the hood. It's no big deal for me 😎

@@N-Krazy1976no weird sounds or anything like that when you’re driving?

@@giancastro6590 No Sir 👍

Congrats on your purchase! The Paddle Shifter Extensions look and work great with no issue at all. I would recomend them for sure 👍

@@N-Krazy1976 Thanks for the recommendation!

They were purchased from the Dealership when I bought the Car. They are actual Hyundai ones. Talk to one of your dealerships and they should be able to help you out. 👍

As far as I know there has been no interior changes to the 2024 modell so I beleive you should be good to go 👍 Thank you very much for the compliment and watching my videos 😁

I seen that earlier today 😁 👍 🍻

You can buy it pc by pc or all at once depending on your budget. Because these cars come one trim level it is nice to customize a bit 😎

You are very welcome 🙂

There is no drone at all. Sounds great! Well worth doing 👍

@N-Krazy1976 Thanks for the quick reply. I'm passing by the muffler shop today to get a quote.

@@MalditoBori No problem at all. If you end up getting it done you won't regret it. If you do end up getting it removed let me know your after thoughts. 😎 👊

@@N-Krazy1976 Got it done yesterday. Sounds awesome.

@@MalditoBori That is so awesome Man! I knew you would like it. Gives it just a little more sound and the pops and bangs are just🔥🔥🔥 😛💪

Thank you 😁

Because I was not using the lock nut it was the only thing holding it in place.

Hey there, Nope no problems at all. As long as there not lifting once you apply them then you will be good. Mine did end up lifting a bit after a couple days so I did have to pull them back off and use a better exterior 3M but now they are stuck on 100% 👌

@@N-Krazy1976 nice. Good to know. Appreciate the tips.

​@@TheRealBobWillkins You are very welcome 🙂

Can you send a link which 3mm you used? Mine has just started peeling. Smh lol

@@elantran2803 Hey Brother, Yeah the 3M on some of these parts is.pretty 💩 lol.. Here is a link for the stuff I used. It is Automotive exterior 3M 💪 Buy 2 of them so you have enough for both pcs 👍 3M Exterior Attachment Tape for Automotive, 1/4 in x 5 ft (0.64 cm x 1.52 m), 38582 a.co/d/9QjUoey

Thank you 😉

Appreciate that Brother! Stay tuned 😎 🍻

The steering wheel, Hood and Trunk Emblems are from Brenthon Badges out of Korea. The steering wheel emblem came black and partialy chrome colored so I plasti dipped it all black.

@@N-Krazy1976when you ordered those emblems did it come with all 3 or did you have to buy all of them separate

@@dylanemerson2354 The front and rear are a set but you order the steering wheel seperate 😎

@@N-Krazy1976 is there anyway you could post the links you got them from

@@dylanemerson2354 global.brenthon.com/total

It was winter time and the motor is still warming up . When fully warmed up it runs around 90 to 93 Deg.

Never really cosidered that actually but the overlays did not cost much and for me they were much easier than taking off the whole wheel and taking it apart 🙂

Catch Can, Intake stuff like that should be fine but tuning, downpipes and stuff like that could be an issue if your seeking warranty work that could be related to those things. I am also in Canada so the US could be diffirent. Bassically anything pre or post emisions should be fine. 👍

Thank you Bro 👊 Quick and easy install and looks much better than stock in my opinion 😎🍻

@@N-Krazy1976 hells yea! 😁

You are very welcome 🙂

Hey Man, Thank you very much for the compliment and for checking out my videos.🙂 I purchased both the front decal and the bumper scuff protector from Ali Express. 👍

@@N-Krazy1976 just found them thank you! Look forward to future vids

@@ryanslaughter1145 Awesome Brother! Stay tuned 😛 🍻

I really appreciate that Brother! Hope all is well with you 🙂 I have not uploaded too much lately but I hope to have some content coming soon 😎

I never actually got a link for the trunk supports from the seller. You can message him that your looking for the trunk ones 😁👍

Than you Sir! I appreciate the compliment 😁

It'a an eazy lip. 👍

Awesome! Hopefully the video helped you out. The weather got super cold here so I have not had a chance to try and move the bracket yet. But when I do I will post it for sure 👍

As much as I would love that my friend I do not want any issues with warranty. I will tune it one day once the warranty is up or almost up lol.. I will go N75 stage 2 when I do 😛

That's awesome Brother! Nothing like customizing your ride 😎I will check them out for sure 👍

Thank you 😎

You are very welcome Roger! Glad to be of help to the community Brother. 🙂 👊

@N-Krazy1976 wait, how do you know my name😋

@@klasseact6663 I am subscribed to Marcin's Channel and I know who you are from there lol.. 😂👍

@N-Krazy1976 oh yeah, I see your name, my bad! We've got some vids coming to his channel, lots of sh!t been going on with our cars, I think mines ok and I'm pretty sure his is too🙏

@@klasseact6663 All good Brother! Yeah I have been seeing the issues with the Knock Sensors you and him have been having.Hopefully it is just a bad batch of sensors from factory and now that you have had it changed you mite be good now 🤔 I have been lucky with my 2023 so far🫰 l am looking forward to the future content 🇨🇦 💪

Hey Man, It would be easy to pop it back off and paint or plastidip it black if you want. 🙂👍

Thank you Brother I really appreciate that! 😎 The powerflex bushings were well worth the money. I just went with the N Lite intake from sxth because I am not planning to tune the car anytime soon and the factory airbox flows pretty good already. I do have the magnetic oil drain plug from sxth as well. 👍

@N-Krazy1976 No problem, bro.. the factory airbox does flow well. i am back to full factory intake.I don't think you even need to change it. Come spring, we will see what trouble awaits 🤫.

If you want to hear more sounds from the turbo then the open air filter is great! But if you want to keep your IAT down then the factory Airbox is the way to go.. As I am sure you already know Taking in hot air from the motor will cause more heat soak and that directly relates to less power.. I totally agree with you wanting to go back to stock 👍Can't wait to see you hurt some more peoples feelings Brother!🤫@@NBABY-J

@N-Krazy1976 I totally agree 👍🏽. Well, when the weather warms up. It brings out the beast in most of us. 😁. Can't let them catch you slipping 🤫

@@NBABY-J 100% Brother! 🇨🇦 💪 💯

Hey Man, I ordered for the Hyundai Elantra/Avante. Would just be for the CN7.

Thank you Sir I really appreciate you 👊 I am all about putting the little details into your car to make it your own. 👍 The winter has been pretty mild here in Alberta this year so that has inabled me to be able to cruz the car a bit. 💪 Stay tuned Brother 🇨🇦

Thank you 🙂