Woodmaxx has chosen to discontinue the TTWT discount code. Please use the following link to purchase a Woodmaxx product. This helps to support our channel: bit.ly/woodmaxx
Ah, I was wondering why there hasn't been a followup video on this equipment. Disappointing about them discontinuing the discount code. Back to looking harder at the Woodland Mills offerings....
@@corvettefloridawe are planning to shoot a video this week using the chipper. Yes, I’m disappointed in them removing the code. I could not help that. The delay has been largely due to those negotiations.
@@TractorTimewithTim That is kind of a raw deal for you. Your video is the main reason I am considering the MX-9900. You did a lot of research and the video here you created is first rate. That WoodMaxx would kick you in the shins like this (my opinion) is forcing me to reconsider. Ethics matter to me.
@@corvettefloridawell, they will still pay me a commission if the buyer clicks the specific link in the description, or in this pinned comment. Not as easy as the code, nor does it provide you a discount, but it is something. I do appreciate your loyalty.
I thought the Canadian machine’s electronic feed was interesting. I have some experience doing tree care and working around pro chippers, and I can say the electric autofeed is a LIFESAVER!! It allows you to put a branch in and forget about it while you go get the next branch. Like Tim said, it will manage the feed rate, and even reverse the feed roller if necessary. $12,000 is kind of insane though. You could get a decent used tow-behind pro chipper for that price. The only other thing I will mention from an operation perspective is the feed roller downforce. If there is not enough pressure from the rollers, it will not be able to break off smaller limbs against the feed chute wall, and thus get stuck. I always keep a hatchet somewhere on my chippers to hack off smaller limbs. Just some thoughts from an arborist. Thanks Tim!
The down-force on the feed roller is rather substantial with two gas shocks providing that. The teeth on the feed wheel climb up over the material and keep it moving in.
I got the Woodland Mills wc68 for my Kubota B2650. I was very close to selecting the Woodmaxx but I chose the WM because of safety. I liked that the control lever was at the bottom of the indeed. If anything were to go wrong your body would push in the lever and it would stop or even reverse. The Woodmaxx would be nearly impossible to reach in an emergency. Mine was delivered in less than a week. I've used it a half dozen times around my property and have had no issues.
Another good video Tim, thanks for everything you show us and all the time and effort you put into these videos! For a little over 2 years now I've been running the Wallenstein and I have to say, mechanically it's bulletproof. Beautiful chips, extremely low maintenance but without the roller feed, running brush or vines through it can be a bear. I'm in LA (that's Lower Alabama) and nearly everything on my property has vines. I'm moving up to a roller feed with a larger infeed opening and I was pretty much settled on the MX8800. After watching your videos I've decided to step up even further to the MX9900. Totally agree that disk weight means a lot plus I really like 4 knives over 2. Thanks for all the information.
Thanks! Please use the link in this video description or pinned comment to purchase. If you do so, I get a small commission, and it does not cost you any more! Thank you!
@@danandfaith the thing is I would pretty much only use on my own property. Somebody on a tractor group mentioned that the cost of one of these would probably buy more stump truck loads of mulch than you’d ever need. I have a bunch of box elder trees to get rid of, was going to chip them up and use them on the trails in the woods to try and keep the grass/weeds at bay
Tim most hydro-gear pumps us synthetic oil I find it interesting the manufacturer of the chipper recommends conventional oil. I look forward to some chipping videos.
Would love a hydraulic in-feed chipper! I prefer chipping over burning, unless clearing huge area and stumps/etc. I can start stop whenever, don't need to worry about no rain/ high fire danger and you can use the chips for something after. I spread them on my trails to fill in low spots. You can chip pretty darn fast with a machine like yours! No more babysitting burn piles, seems like in the end it takes just as long. Thanks for sharing!
I don’t have this machine I have MX-8500G+ and I have nothing but good things to say about the chipper. Like you I did my research on all the models in my class of machines and I am very happy with my choice. Top notch A-1 American made company and products.
With such a heavy and fast moving flywheel would you recommend running an external overrunning clutch pto adapter to keep the pto brake from wearing out as fast?
Very nice presentation. The only disadvantage to the Woodmax is if one ever got hung up in a branch and was being dragged into the chipper, the control bar might be out of reach to stop the feed. The feed control lever on the Woodland Mills for example would be hit easily and stop the feed. Looking forward to seeing future videos on the Woodmax.
I run an MX-8600 on a 1025R w/ turbo. It happily chips anything that fits in. Its a groan on the 3 point to lift. I picked it based on good reviews, customer support stories, made in USA, and the hydro feed. I only wish the feed chute was horizontal vs the upward angled chute. I also bolted 2x4 treated along the side bottom rails to keep it off the ground during use and storage.
I had a Wallenstein BX72 RI. I bought it used from an estate sale on facebook market place. I have an old David Brown 990 -58hp probably as old as it is it was barely up to the task, as it requires 45 PTO HP. I had no Hydraulic remotes, and had to plumb it into the loader curl. Yes I agree for the money they want for them, it should be a self contained Hydraulic system. The Intellifeed system is relatively easy to set up, you merely need 12 V power and ground to plug into a small plug to give the system power. Just 2 small wires so not much of a big deal. Now I will say the system seemed to work flawlessly, there is a small led readout with the RPM's that the flywheel is turning, which you bring up to the 540, once you start to feed material through it, if the RPM's drop the feed slows, from what little bit I used it, even the old tractor seemed to run it without any major difficulties. Now to the reason I bought it, was the price. $3500 Canadian, which is $2800 US??maybe, not sure. This model at this moment lists for $17000 Cdn with the shipping, and I think at the time it was around the $13000 mark. When I went and looked at it, it was basically brand new, a few scratches, but many just from trying to handle it. It weighs 1300lbs, and very awkward. The reason I sold it, I was approached by someone who wanted one bad, Covid had just happened 6 months before, and he could not get one anywhere. He offered me $6000 for it, and I loaded it on his trailer LOL I have a fairly large pile of brush down on the back of my property now, but also made $2500 on the deal, and the pile is out of sight, and will eventually rot up. I often think I should have kept it, but as you said chipping brush is work, piling it up with the loader is not that hard.. LOL My final thoughts on the Wallenstein, over priced, they are well built, but for the price should almost include someone to come drag the brush in for you. The intellifeed system was a great option, for a sole operator, as you did not have to tend the feed, it did it for you, and probably better than any person could, really.
I have this same model (3 yrs older - has adjustable legs). I think you'll find that the max diameter log it can handle is no where near the advertised 8" capacity. It has difficulty chewing up a green 5" white pine. Much better than the ones you'll find at a big box store. Has otherwise held up well and have had no break downs thus far...have approx 30 hrs on it. Thanks for the video!
Good looking product and nice to see 👀 it's made in America 🇺🇸. It's a little pricey, but for the average home owner. Great for a lawn care company or the like. Can't wait to see it operate old boy. 😅
I am retiring and moving to wooded 20 acres. My first purchase will be this exact machine that will be on a Kubota L4760. I'm going this big so running branches through it will be easier.
I bought the woodmax 8600. To mate up to my yanmar sa424 2 years ago when they first came out and I am super happy with it. I like the blade sharpening service that woodmax offers.
I am intrigued, thanks for the research and quite frankly, made in the USA gets quite a few additional points for me. Now you have me anxious for some live action.
i have more than 150 pine trees on less than 2 acres. i've looked so much at these, this brand was on the top of my list. Glad you got such a nice one! WolfieColada!
I had a bx52r for six years . This should be interesting . From what I can see already is that if you could take certain features from the wood max and bxr52 and combine them it would make the perfect chipper . Be carful with your hydraulic pto clutch on these newer tractors . All chippers are killers on the brake inside . I think that all chippers should come with a built in overrunning clutch so they just freewheel down on there own not using the pto brake . Im interested too see the torque on the wood max being overdriven and lifting the branches and heavier limbs up higher too load in the wood max compared too the Wallenstien . Lots of interesting features on both as I said . Looking forward too this series of test . 👍👍
I have used the Woodland Mills W68 for almost 2 years. I have chipped so much with it and frankly, I am impressed. It is limited to a 6 inch log, but then again, that size is firewood for our wood burning stove. The infeed roller is critical. I appreciate what you highlight about the Woodmaxx. The hydrostatic function is a plus and I appreciate it being made in the USA. Is that functionally worth an extra $2k over the Woodland Mills? I'd be hard pressed to say it is. If it was within $500, I might consider it. However, given the quality and experience of my Woodland Mills WC68, I won't need to for quite awhile.
Beyond the costs difference, some weight might be given in consideration that the PRC is an adversary and our U.S. dollars help support its underminding of our country. I realize it’s difficult to not buy products or components made in China, but I do when I can. I’ll likely be buying an American made WoodMaxx.
@triciahill216 unless you literally never buy anything from China, it's $2,000 that you are being overcharged (hint: do a quick search on "American made" cars. Then look at the Amercian sourced parts. Only Jeep is in the top 5. Your American "car" likely has many Chinese parts) Capitalism is still capitalism.
I've have the Woodlands Mills chipper for over 3 yrs & have not had any issues with it, use it on the JD 1025R & it handles up to 4" elm with ease, plus dealing with them in Cdn $ was a plus for me in Canada.
Came here to mention the Woodland, $6000 is just way to much money to spend on a chipper for a tractor for 90% of people For most people the only way to offset the cost, is what they would spend on buying mulch in a year... witch is only a couple hundred dollars
We considered the Woodland Mills, but when we got our MX8800, Woodland Mills was 3 or 4 months out on filling orders, while WoodMaxx shipped within a week. Woodland Mills did have a good story, but not availability.
That's quite a price on that chopper, I would assume that the quality is that same throughout all their products. I'm actually looking at the WM-8M chipper and the Woodland Mills 6-inch hydraulic chipper. Thank for the video and any input you can send my way.
We did our best to compare/contrast those chippers in this video. Did we miss anything? I would encourage you to step up to the 8800...I think you would LOVE the hydrostatic infeed. We have a more recent video showing this chipper in action
@TractorTimewithTim thanks for responding. Price is a big consideration and concern as well. I have been perusing the WooodMax website and taking everything into consideration. I do like the idea of the hydrostatic vs straight hydraulic or mechanical feeds. This is a tough decision, but I want to make sure that I'm getting the best bang for my buck
I have a WoodMax WM8H for 3 years. That thing is one hungry beast. I power it with my Kubota L4060. Pretty much the only time it slows down is when I'm feeding it an 8" hard wood log.
I’m curious why the Woodland Mills TF810 didn’t make the list?. Also how much influence did the affiliate code they gave you influence your decision? Not picking on you and you have an absolute right to make a living providing the valuable info you do, just wondering if it did at all. MX9900 is on my short list but that TF810 is just so tempting
Is that the new WM model? It was announced after this was published. Different design. Would love to compare it. I did my research as described in this episode, then reached out to the company for the deal. We are mature enough as a channel where we can choose our partners. I chose woodmaxx due to the reasons mentioned in the video. Took me many months to convince them to partner with us! So, I made my decision independently of the deal offered. Make sense?
I have a few chippers from a 6 to 12". Best is the burn pile:) don't think I would ever want to tie up my tractor with a pto mounted one, unless you have 2 tractors. Only positive I can think of with a PTO is easy to move
I'd like to have a chipper, but I just can't justify the cost vs actual use right now.I think I'd be paying over a dollar per branch chipped for some time :) If it could double as a leaf vaporizer, then we'd be on to something. Most of the trees on my property are oaks, and the amount of leaves I get around the house is almost overwhelming.
Be aware that any of these are very heavy and very cumbersome hanging off the back of a 1025R. Tractor use is severely limited with the chipper attached.
Regular Johnny should start this project... Stand by Johnny X.... is there a 2038R available? Any Kabotas around? I see another GREAT Video... 😮😅😊🍔🍔🍔💪💪💪💪
I have a 3039R and a WoodMaxx 8800. I use them both commercially and have well over 100 hours of use of the chipper. If it’s sharp, it’ll eat. 8” fresh hardwood might be a stretch…but seasoned hardwood or 6” fresh is no problem. I love the machine aside from 3 issues. One, LOCTITE everything. I mean everything. The vibrations are intense and it’s hard to keep bolts from backing off. Two, it leaks oil. WoodMaxx sent a fresh reservoir and now it leaks worse. I can’t figure out where though. Three, the dust cover over the oil reservoir/belts is a very tight fit. A few times of taking it on/off abd it begins to cut the hydraulic hoses underneath it. Overall, I love it. We use it all the time and we are not polite to it. We use it hard and it keeps on working. We used to haul away 3 or 4 loads of brush a day in the 7x14x4 dump trailer and now it takes nearly all day to fill that trailer with chips. PS, the chips are extremely fine. Bigger chippers throw out hunks of wood…my 8800 makes tiny little bits of wood. We use the chips for paths, erosion control, compost, ditch filler, cheap dirt…it’s changed my business completely.
I have a MX8600 with my 2025R. It's a great machine and, like you, I've been extremely impressed with the quality starting with the packaging and extending through every part of the chipper. You're gonna love it.
I bought the MX8600 last year and I love that thing. It's a great tool! And the packing they shipped it in is above and beyond the norm. I think it's the best implement I have bought. I did not know the Woodland Mills was built in China. Whew, dodged a bomb on that one. I thought they were built in Canada.
I have the wallenstein 52 manual feed i bought around 2016 for my 1025r. The opening will take bigger trees than the 1025r likes. I've put really crooked and Y shaped branches in it. I don’t have to break up the branches to much. Plus i rake up the leaves and fine twigs and run them through it. I use the chipper every year multiple hours. I've made more chips than frito lay. I think the manual feed would be better but i don't work hard using mine. It cost 3000 dollars.
I have the WC68 from Woodland Mills. I love it. I have had it for a couple of years and it is a joy to run. I have a tractor with 27 hp at the pto and I can't think of anything I've been able to fit into the chute that it wouldn't chip. The price point of the WC68 at $2999 made it much more practical to purchase. Anything larger than 3-4" in diameter in my mind is firewood. I'm not chipping 6" logs. Even though the Woodland Mills was built in China it was flawless when I received it. I bought it during the crazy supply chain shortage and it still got to me in two weeks.
I have a woodland Mills chipper as well as a sawmill, I think it is important to recognize customer service. I have not found another single company that had better customer service than Woodland Mills. They have even replaced parts for me when user error was found to be at fault.
I feel silly for not having found this channel til recently. Best content for tractors/equipment from a perspective of just the regular dude. Awesome job Tim!
For me woodmaxx was the only company with a reasonable wait time. Woodland mills was saying multiple months wait. Woodmaxx was also a littler cheaper for me at the time i think.
I’m definitely looking into one for my 8.5 acres. My boss has a 4 inch woodland mills he runs on his 25 hp tractor and it does great. I was looking to get the 6 inch version because I have a 35hp. But the Woodmax being made in the USA is a huge plus to me.
Looks like a great unit and looking forward to seeing it in action. Just wondering if you paid retail price (or the ttwt code price) on the unit or if it was subsidized by the manufacturer for you?
Interested to see how this works on some of the higher hp tractors. I have the MX8800 and with hardwood a log larger than 6” or 7” is about all the tractor can do.
I have had my MX9900 for a couple of years now. It is by far my favorite attachment. Others say they would rather burn, well some dont really have a great option to burn. I have heavy forests with very little clear areas to burn, plus burning is extremely limited here. Only at night, only on GREEN days, and must have pressurized water source. With the mx9900 I can chip up a pretty large pile faster then I think i could burn it and I have chips to use.
@@inspectr1949 It is a 2038R, I have chipped up to about 6" of pine. The reason you want a bigger opening is you have less trimming to do before feeding it. I think most people who hate chippers probably used ones that are too small and do not have a powered infeed.
The reason I subscribe to in the first place was that you don’t ask for subscribers. I wish I live close to you I’m disabled and working equipment was I did and as long as you can get to where your clay is smooth it will hold water but it is going to have to be bowl shaped. If you want it to be not smooth you will have to do that after you get it bowl shaped
Very interesting and good presentation Tim. After viewing I can see your thinking about it being the best value.. My concern is that they say no synthetics lubricants or how ever you put it. For me that is a disqualify item because I am a firm believer in synthetics over petroleum. Every single time. I use Amsoil in everything and I do mean every piece of machinery I own and have always had superior performance when I have changes to the Synthetic. I would not buy anything that I can't us Amsoil in, the difference has been so great over the last 25yrs. Petroleum is an inferior product that increases friction and wear and I won't use it and I know many like myself.. So the product and your advise is compelling,, however.......... So if there is no give with WOODMAX I don't see how to use it for me then. Any comments or advise??? Godspeed.....
My comment would be that this is not an engine. Very minor usage of the oil. No idea why they say no synthetics, but I see no reason to get uptight over it.
@@TractorTimewithTim I understand you comment. However it is just one of those things that each of us have that we believe & stick to. Mine is synthetic over petroleum......
Good choice, Tim! I bought the MX8600 last year shortly after buying my tractor. It never ceases to amaze me with what that thing is able to eat, even on my TYM T25. Be sure to step aside as you feed a log into it. When the roller grabs the log, it sometimes decides to thrash it from side to side, which can "surprise" your head! 😆
I've got the Woodland Mills 8" chipper and love it. Your Woodmaxx DOES appear to have much less assembly required than the WM did, but the WM didn't require anything that a simple homeowner couldn't do to assemble it. I don't like the Woodmaxx's safety bar as much as the WM's though. Also, you didn't get into the specs as far as how much PTO HP is required to chip a 9" log (if Woodmaxx even addressed that in their brochure/specs listing), where the WM one that I have said that to chip an 8" log/limb you'll need 60 PTO HP (if I remember correctly). So, I'm curious if your larger Deere will even have enough PTO HP to chip a 9" tree if you wanted to? I am completely unfamiliar with the Woodmaxx's hydrostatic infeed vs. the traditional hydraulic infeed that my WM has. Unless I'm wrong, the larger hydraulic tank on my unit would be a PLUS, as the more liquid that you have, the longer it would take to overheat it? And I would think that the smaller 2QT requirement of yours would be more prone to overheating? But I'm FAR from a hydraulic/hydrostatic expert here, so I could definitely be wrong. I'm anxious to see you put this to use, and get your (as well as my) impressions of it running.
Note that the WoodMaxx is using 10W40 motor oil, and not hydraulic fluid. That’s significant. In our use (MX8800) it has not had any issue with heating.
I’m not so much concerned about 9” log. Doubt I will want to chip that large. My issue in the past has been ‘forks’ in limbs not being able to fit through the opening.
@@TractorTimewithTim that's the reason that 8 got the 8" WM chipper. I have no desire to chip anything that large, but it takes in almost all of those branches that have "Y's" in them. Anything over 3" or 4" for gets split into firewood.
Tim, We’re getting ready to pull the trigger and buy a PTO chipper. Have you used yours yet? Any second thoughts about your WoodMaxx? Same answer if it wasn’t a “sponsored machine (I’m assuming WoodMaxx gave it to you for the promotional exposure)?” Thank you for highlighting these chippers!
I think it is the best. I have used it only briefly. Other commenters feedback reinforces my opinion. Woodmaxx has removed my 5% discount. If interested, I would appreciate if you purchased via the link in the description
The comparable Chinese made Woodland Mills WC88 and TF810 PRO require a min 35 PTO HP but the USA made WoodMaXX 9900 is 25HP, wonder why the difference?
I've logged a lot of hours on 2 different model pto chippers, the crary bearcat ch5540, and now the ch8540. No hydraulics, super simple, with sharp blades feeding is easy. Would love to try a model with hydraulic feed rollers, but I'll stick with my ch8540.
I have the MX8800 and I love it. I bought it for the reasons you point out. I do wish the in feed folded on the MX8800. If you need a hand on a video let me know.
Nice woodchipper! i choose last year for a wallenstein rippoff out of China. Payed 2750 euro ex vat for a double hydraulic feed with pto driven own hydraulic. Made 80m3 of chips with it and never failed. With the lower speed it destroyed my kubota 24hp b2150 pto inside 😢. after that on my dads 75hp jd 6020 tractor. took 5 inch logs x 6 meter on 1000rpm pto speed in 15 seconds. After that i bought a 35 hp jd 4410. it handels the chipper fine on 750 rpm pto. After the pto problems with the kubota, i also choose for a belt driven when i had to do it again. I only think it is not possible to chip 8 or 9 inch logs with only 46 hp. I think when you use your 4075r it stalls when you want to chip i inch logs. But i am very curious to see your opinion
I am a Canadian viewer and a fan and sorry you got your facts wrong. Canadian the Wallenstein is one of the nicest brands and your prices are wrong. 8900 Canadian which is like 6 grand american and I am guessing the 12 thousand one is the same. Being Canadian made they are very well built and put together again the best in the industry
I bought the 8800MX for my 2038R and absolutely love it. We have a tree farm and use it often. It rarely chugs or stops the tractor, unless we are being absolute dummies shoving in straight up firewood sized hardwood pieces. One pro of the 8800MX is that there are less knives, so less maintenance and the replacement costs are less. Still chips super fast. I think if you have more horsepower, say a 3046R, the increased number of knives on the 9900MX makes more sense.
Actually the way the more knives work is every other knife takes a bite of the wood. IE two inside knives and 2 outside knives, versus just 2 full length knives. This means each knife takes a bit smaller bite making it easier for a smaller engine for the given size.
@@hagak1679 Never realized that not sure how they do that unless there are 2 different sets of anvils spaced apart, I'm familiar with wood planers being a wood worker, when helical multiple cutter heads came out replacing the 2 or 3 cutters they require more HP as the multiple cutters are always engage in the wood.
@@inspectr1949 One anvil, but it is as wide as both knives (inside and outside). the 4 knives are 90 degrees apart and 2 are inside the flywheel and 2 outside the flywheel with some overlap. So as the flywheel spins a knife only takes out a little more then half the wood (if you have a piece as wide as the anvil).
@@hagak1679 Thank you, tried calling WoodMaxx for clarification but could'n't get anyone there to take my call. My machine is 24 years old and has 30 PTO HP so I don't want to overburden it but thinking ahead to the future when I'll be shopping for something 50-60 PTO HP.
@@inspectr1949 Just dont feed it too big of stuff, you will hear the tractor bog down just reverse the feed and continue with smaller items. 2038R can at best chip 6" rounds, that is with soft woods.
Tim, I'm interested to see how your experience with the Woodmaxx differs from what I've seen on a few other channels. I know that Brock from Rockhill Farm was using a gravity fed Frontier model on his 2038. Bill from "Today in Iowa" was using a Wallenstein model similar to Brock's on a 1025. Both didn't have good experiences with their PTO chippers. One question I have is, what made you decide against a PTO chipper/shredder aside from the gravity style feed?
Thanks yet again Tim, you have me leaning DJ green and now Woodmaxx MX 9900. Have 20+ acres of towering red pine that needs to be thinned and milled leaving the top 20' that tapers down from 8" and full of branches that will need to be chipped, thought my 23 year old 29.5 PTO tractor was too small to handle any chipper with a capacity bigger than 6" so I'm looking at a JD 4066M to run the biggest chipper I can.
I have a Farmer's Helper 42S chipper which I believe is actually a Titan with Farmer's Helper branding. I had purchased it used for my 1025R and I kept it after upgrading to the 2038R. I believe it has a 42 pound flywheel and it accepts up to 4" material to chip. I find it is too short with the small frame leaving it too close to the ground and the driveshaft at too sharp an angle so I set it on top of a set of ramps when chipping. It is a bit too small for the 2038R. I'm guessing that the WoodMaxx 225 lb flywheel will be a great advantage. The 42S I have has a clogging problem. Leaves and small branch chips will repeatedly clog the ejection chute and I have to shut down to clear it. I'm thinking the WoodMaxx higher flywheel RPM's will lessen the tendency to clog by ejecting material much faster. Also it will likely through much farther with greater force so important that no one ventures into the ejection path. I find the wood chips are great to spread on my trails. As always this is another great and informative video.
Wish I had seen your well done unboxing video earlier when I was choosing; a little over 1 year ago. I went with a Farmer Helper 4" manual feed. It seemed to fit the bill and is built very rugged, although there were some 'fitment' issues I had to deal with. Not sure if all manual feeds are similar, but it can really 'shake, rattle, and vibrate' your hands at times when trying to get things fed in. It generally feeds 'OK', but isn't near as good as a hydraulically driven feeder I'm sure. I really like the one you choose and may even sell mine to get the MX-9900 simply due to my age and liking of the hydraulic feed AND the lower and straight chute the WoodMaxx has. One of the biggest reasons I went with my original choice was its min. HP rating and I only had my BX, so limited myself to 4" wood; but am now procuring a 60HP tractor, so no worries about HP requirements. Thanks, Tim!
Very nice chipper! Love the hydrostat feeding system. The chipper I own though is a chipper/shredder from Wallenstein, the BXM32. I love it! I wanted a chipper/shredder, and there was not a lot on the market when I bought it, and I always try to buy made in Canada or made in USA products. I ended up with that unit. It is about 15 years old, and good as new. Always like your videos! Keep up the good work! Never enough tractor videos! :)
Your instincts are proven by simple math. 6” X 10” = 60”sq. … 9” X 9” = 81”sq. None of the others come close to the square inches op your machines feed opening. I’d love to have one of those.
All the cutting Vibrations flow threw the pto into the gear Box. Chippers with a drum as cutting system and a Belt drive are not so tricky for your 1 series.,your deere will life länger. Chipping is a heavy job for small compact tractor
I had a Merry Mac style chipper shredder that did a good job but as you pointed out early in your video all the branches had to be lifted to the hopper and there was no hydraulic feeder. Fairly clean branches would gravity feed but most branches had to be spoon feed into the chipper.. Brush was usually the same issue. Some times it would grab the branch violently and pull it out of your hand. Also the chip discharge would clog more often than it should have. The chipper chipped just fine but the feeding and discharge left much to be desired. I think you identified the important features on a PTO driven chipper. Looking forward to seeing it in action. (BTW - its called a swash plate)
Ken from bolt on convinced me to go with the 9900 after I was looking at cheaper and smaller units. Much to my wives frowning I bought one. It is a beast. Can't go wrong with buying bigger than you think you need! He might not have gotten the packaging we did - but he also I think bought pre covid and paid a lot less! We left ours bolted to the pallet!
A few years ago I got one of their TM-86H chippers that I drive with my 1023E. The chipper is slightly more capable than my tractor but as long as I don't go too crazy with the wood size I've been VERY happy with it. I burn the bigger stuff but even though i do like keeping a small brush pile as habitat for the smaller critters (well away from the house), I like making my own mulch also.
I had to cheat and look at the website for a video. Oh boy! that is awesome. Just keep young helpers away from it as I've heard of stories of kids getting dragged into those type of feeders. Odd I just sold my small chipper shredder this am and talking about a 3pt unit again. I had one in the past but didn't have shredder option. That part is handy for clumps of yard wasted and spent plants to make nice compost material. Can't wait for your demonstration video.
We have been disappointed with performance of our stand alone Woodmax. Their customer support is outstanding but we can't get the blades placed correctly, because it always jams up and we are below the spec on what we put into it. I can only do so much mechanicaliy speaking so we are going to sell ours. We will wait and see how this pto one works on your channel. Especially blade placement.
I have the WM-8H for 5+ years now and have run tons thru it. Have not had many problems other than normal maintenance / belt tension / blade sharpening's. The worst's are the lower 3-pt lifting arms twist over time due to lifting / carrying the weight of the machine I've had to make my own replacements. The tension spring L bracket connections at the top are somewhat thin and break off after a while due to the bouncing during feeding if the tension is set higher than what shipped at.
I have a 60" Woodmaxx flail mower. Great product and the shipping crate was made of angle iron bolted together. After removing the mower I "rebuilt" the crate and use it to store my tractor bucket on top and slide the forks underneath.
Woodmaxx has chosen to discontinue the TTWT discount code. Please use the following link to purchase a Woodmaxx product. This helps to support our channel: bit.ly/woodmaxx
Ah, I was wondering why there hasn't been a followup video on this equipment. Disappointing about them discontinuing the discount code. Back to looking harder at the Woodland Mills offerings....
@@corvettefloridawe are planning to shoot a video this week using the chipper.
Yes, I’m disappointed in them removing the code. I could not help that. The delay has been largely due to those negotiations.
@@TractorTimewithTim That is kind of a raw deal for you. Your video is the main reason I am considering the MX-9900. You did a lot of research and the video here you created is first rate. That WoodMaxx would kick you in the shins like this (my opinion) is forcing me to reconsider. Ethics matter to me.
@@corvettefloridawell, they will still pay me a commission if the buyer clicks the specific link in the description, or in this pinned comment. Not as easy as the code, nor does it provide you a discount, but it is something.
I do appreciate your loyalty.
@@TractorTimewithTim Hi Tim - I clicked your shareasale link - it's dead - not working. I suspect you're not receiving any commissions because of it.
I thought the Canadian machine’s electronic feed was interesting. I have some experience doing tree care and working around pro chippers, and I can say the electric autofeed is a LIFESAVER!! It allows you to put a branch in and forget about it while you go get the next branch. Like Tim said, it will manage the feed rate, and even reverse the feed roller if necessary. $12,000 is kind of insane though. You could get a decent used tow-behind pro chipper for that price.
The only other thing I will mention from an operation perspective is the feed roller downforce. If there is not enough pressure from the rollers, it will not be able to break off smaller limbs against the feed chute wall, and thus get stuck. I always keep a hatchet somewhere on my chippers to hack off smaller limbs.
Just some thoughts from an arborist.
Thanks Tim!
That hatchet is a great tip!
The down-force on the feed roller is rather substantial with two gas shocks providing that. The teeth on the feed wheel climb up over the material and keep it moving in.
I got the Woodland Mills wc68 for my Kubota B2650. I was very close to selecting the Woodmaxx but I chose the WM because of safety. I liked that the control lever was at the bottom of the indeed. If anything were to go wrong your body would push in the lever and it would stop or even reverse. The Woodmaxx would be nearly impossible to reach in an emergency.
Mine was delivered in less than a week. I've used it a half dozen times around my property and have had no issues.
Another good video Tim, thanks for everything you show us and all the time and effort you put into these videos! For a little over 2 years now I've been running the Wallenstein and I have to say, mechanically it's bulletproof. Beautiful chips, extremely low maintenance but without the roller feed, running brush or vines through it can be a bear. I'm in LA (that's Lower Alabama) and nearly everything on my property has vines. I'm moving up to a roller feed with a larger infeed opening and I was pretty much settled on the MX8800. After watching your videos I've decided to step up even further to the MX9900. Totally agree that disk weight means a lot plus I really like 4 knives over 2. Thanks for all the information.
Thanks! Please use the link in this video description or pinned comment to purchase. If you do so, I get a small commission, and it does not cost you any more! Thank you!
Thanks, just after I convinced myself I didn’t need one 😂
For real I'm in the same boat 😂😂
Seriously, these are worth it. We have an MX8800. It has been one of the best attachment purchases we’ve made.
Oh boy am I right there with you…lol
@@danandfaith the thing is I would pretty much only use on my own property. Somebody on a tractor group mentioned that the cost of one of these would probably buy more stump truck loads of mulch than you’d ever need.
I have a bunch of box elder trees to get rid of, was going to chip them up and use them on the trails in the woods to try and keep the grass/weeds at bay
Can't wait to see it in action, Tim!
Great short today in your WM 86!
Tim most hydro-gear pumps us synthetic oil I find it interesting the manufacturer of the chipper recommends conventional oil. I look forward to some chipping videos.
I have the WoodMaxx 8600. Kubota B2401. Woodmaxx chippers are amazing! The hydrostat feed works great!
Would love a hydraulic in-feed chipper! I prefer chipping over burning, unless clearing huge area and stumps/etc. I can start stop whenever, don't need to worry about no rain/ high fire danger and you can use the chips for something after. I spread them on my trails to fill in low spots. You can chip pretty darn fast with a machine like yours! No more babysitting burn piles, seems like in the end it takes just as long. Thanks for sharing!
I don’t have this machine I have MX-8500G+ and I have nothing but good things to say about the chipper.
Like you I did my research on all the models in my class of machines and I am very happy with my choice. Top notch A-1 American made company and products.
that was a fantastic video. hands down woodmaxx is the way to go mass x velocity squared on that spinning wheel
With such a heavy and fast moving flywheel would you recommend running an external overrunning clutch pto adapter to keep the pto brake from wearing out as fast?
Very nice presentation. The only disadvantage to the Woodmax is if one ever got hung up in a branch and was being dragged into the chipper, the control bar might be out of reach to stop the feed. The feed control lever on the Woodland Mills for example would be hit easily and stop the feed. Looking forward to seeing future videos on the Woodmax.
I run an MX-8600 on a 1025R w/ turbo. It happily chips anything that fits in. Its a groan on the 3 point to lift. I picked it based on good reviews, customer support stories, made in USA, and the hydro feed. I only wish the feed chute was horizontal vs the upward angled chute. I also bolted 2x4 treated along the side bottom rails to keep it off the ground during use and storage.
I had a Wallenstein BX72 RI.
I bought it used from an estate sale on facebook market place. I have an old David Brown 990 -58hp probably as old as it is it was barely up to the task, as it requires 45 PTO HP. I had no Hydraulic remotes, and had to plumb it into the loader curl.
Yes I agree for the money they want for them, it should be a self contained Hydraulic system. The Intellifeed system is relatively easy to set up, you merely need 12 V power and ground to plug into a small plug to give the system power. Just 2 small wires so not much of a big deal. Now I will say the system seemed to work flawlessly, there is a small led readout with the RPM's that the flywheel is turning, which you bring up to the 540, once you start to feed material through it, if the RPM's drop the feed slows, from what little bit I used it, even the old tractor seemed to run it without any major difficulties.
Now to the reason I bought it, was the price. $3500 Canadian, which is $2800 US??maybe, not sure. This model at this moment lists for $17000 Cdn with the shipping, and I think at the time it was around the $13000 mark. When I went and looked at it, it was basically brand new, a few scratches, but many just from trying to handle it. It weighs 1300lbs, and very awkward.
The reason I sold it, I was approached by someone who wanted one bad, Covid had just happened 6 months before, and he could not get one anywhere. He offered me $6000 for it, and I loaded it on his trailer LOL I have a fairly large pile of brush down on the back of my property now, but also made $2500 on the deal, and the pile is out of sight, and will eventually rot up.
I often think I should have kept it, but as you said chipping brush is work, piling it up with the loader is not that hard.. LOL
My final thoughts on the Wallenstein, over priced, they are well built, but for the price should almost include someone to come drag the brush in for you. The intellifeed system was a great option, for a sole operator, as you did not have to tend the feed, it did it for you, and probably better than any person could, really.
Been using an mx8800 couple years now. Pretty decent chipper. One small issue that woodmax righted quickly
I have this same model (3 yrs older - has adjustable legs). I think you'll find that the max diameter log it can handle is no where near the advertised 8" capacity. It has difficulty chewing up a green 5" white pine. Much better than the ones you'll find at a big box store. Has otherwise held up well and have had no break downs thus far...have approx 30 hrs on it. Thanks for the video!
Good looking product and nice to see 👀 it's made in America 🇺🇸. It's a little pricey, but for the average home owner. Great for a lawn care company or the like. Can't wait to see it operate old boy. 😅
Love my Woodmax 8600 on my little BX23s.
I am retiring and moving to wooded 20 acres. My first purchase will be this exact machine that will be on a Kubota L4760. I'm going this big so running branches through it will be easier.
Don’t forget code TTWT!
I bought the woodmax 8600. To mate up to my yanmar sa424 2 years ago when they first came out and I am super happy with it. I like the blade sharpening service that woodmax offers.
I am intrigued, thanks for the research and quite frankly, made in the USA gets quite a few additional points for me. Now you have me anxious for some live action.
i have more than 150 pine trees on less than 2 acres. i've looked so much at these, this brand was on the top of my list. Glad you got such a nice one!
WolfieColada!
Built in the USA, I know which one will be mine!
Tim, I'm excited to see this in action. Just wondering why they don't want people to use the synthetic oil?
Good question.
I had a bx52r for six years . This should be interesting . From what I can see already is that if you could take certain features from the wood max and bxr52 and combine them it would make the perfect chipper . Be carful with your hydraulic pto clutch on these newer tractors . All chippers are killers on the brake inside . I think that all chippers should come with a built in overrunning clutch so they just freewheel down on there own not using the pto brake . Im interested too see the torque on the wood max being overdriven and lifting the branches and heavier limbs up higher too load in the wood max compared too the Wallenstien . Lots of interesting features on both as I said . Looking forward too this series of test . 👍👍
Boy could I use one of those I’m sending this video to the finance committee and bring home some flowers that would be perfect behind my 3033R
I have used the Woodland Mills W68 for almost 2 years. I have chipped so much with it and frankly, I am impressed. It is limited to a 6 inch log, but then again, that size is firewood for our wood burning stove.
The infeed roller is critical. I appreciate what you highlight about the Woodmaxx. The hydrostatic function is a plus and I appreciate it being made in the USA. Is that functionally worth an extra $2k over the Woodland Mills? I'd be hard pressed to say it is. If it was within $500, I might consider it. However, given the quality and experience of my Woodland Mills WC68, I won't need to for quite awhile.
Beyond the costs difference, some weight might be given in consideration that the PRC is an adversary and our U.S. dollars help support its underminding of our country. I realize it’s difficult to not buy products or components made in China, but I do when I can. I’ll likely be buying an American made WoodMaxx.
@triciahill216 unless you literally never buy anything from China, it's $2,000 that you are being overcharged (hint: do a quick search on "American made" cars. Then look at the Amercian sourced parts. Only Jeep is in the top 5. Your American "car" likely has many Chinese parts) Capitalism is still capitalism.
The shut opening has everything to do with chipping capacity also.
I've have the Woodlands Mills chipper for over 3 yrs & have not had any issues with it, use it on the JD 1025R & it handles up to 4" elm with ease, plus dealing with them in Cdn $ was a plus for me in Canada.
Came here to mention the Woodland, $6000 is just way to much money to spend on a chipper for a tractor for 90% of people
For most people the only way to offset the cost, is what they would spend on buying mulch in a year... witch is only a couple hundred dollars
@@Morpheen999 the Woodlands Mills is not 6000, it’s was about $3.5K Cdn delivered to my door.
We considered the Woodland Mills, but when we got our MX8800, Woodland Mills was 3 or 4 months out on filling orders, while WoodMaxx shipped within a week. Woodland Mills did have a good story, but not availability.
@@seenithere I was referencing the Woodmax... even $3500 is A LOT of money for a chipper
@@danandfaith That comes with having good products at a good price point, its harder to keep stock
That's quite a price on that chopper, I would assume that the quality is that same throughout all their products. I'm actually looking at the WM-8M chipper and the Woodland Mills 6-inch hydraulic chipper. Thank for the video and any input you can send my way.
We did our best to compare/contrast those chippers in this video. Did we miss anything?
I would encourage you to step up to the 8800...I think you would LOVE the hydrostatic infeed. We have a more recent video showing this chipper in action
@TractorTimewithTim thanks for responding. Price is a big consideration and concern as well. I have been perusing the WooodMax website and taking everything into consideration. I do like the idea of the hydrostatic vs straight hydraulic or mechanical feeds. This is a tough decision, but I want to make sure that I'm getting the best bang for my buck
@@GorillasGunsyep. Always difficult to make the value decisions.
Just remember, you buy only once, but you use it for many many years!
I have a WoodMax WM8H for 3 years. That thing is one hungry beast. I power it with my Kubota L4060. Pretty much the only time it slows down is when I'm feeding it an 8" hard wood log.
Swash Plate is what is controlling hydraulic flow.
I’m curious why the Woodland Mills TF810 didn’t make the list?. Also how much influence did the affiliate code they gave you influence your decision? Not picking on you and you have an absolute right to make a living providing the valuable info you do, just wondering if it did at all. MX9900 is on my short list but that TF810 is just so tempting
Is that the new WM model? It was announced after this was published.
Different design. Would love to compare it.
I did my research as described in this episode, then reached out to the company for the deal. We are mature enough as a channel where we can choose our partners. I chose woodmaxx due to the reasons mentioned in the video. Took me many months to convince them to partner with us!
So, I made my decision independently of the deal offered. Make sense?
I have a few chippers from a 6 to 12". Best is the burn pile:) don't think I would ever want to tie up my tractor with a pto mounted one, unless you have 2 tractors. Only positive I can think of with a PTO is easy to move
I set me chipper on a pallet when I need to swap implements. Pretty easy really.
I'd like to have a chipper, but I just can't justify the cost vs actual use right now.I think I'd be paying over a dollar per branch chipped for some time :) If it could double as a leaf vaporizer, then we'd be on to something. Most of the trees on my property are oaks, and the amount of leaves I get around the house is almost overwhelming.
What is the capacity for running Congress through this woodchipper?
Ha!
Be aware that any of these are very heavy and very cumbersome hanging off the back of a 1025R. Tractor use is severely limited with the chipper attached.
Mine works great as a counterweight! But with pallet forks on the front it is like you are driving a huge boat that turns in the middle.
Regular Johnny should start this project... Stand by Johnny X.... is there a 2038R available? Any Kabotas around? I see another GREAT Video... 😮😅😊🍔🍔🍔💪💪💪💪
For my Kubota BX23s, the Woodland Mills WC46 is perfect. Been using it for a year. No issues and very capable.
I have a 3039R and a WoodMaxx 8800. I use them both commercially and have well over 100 hours of use of the chipper.
If it’s sharp, it’ll eat. 8” fresh hardwood might be a stretch…but seasoned hardwood or 6” fresh is no problem.
I love the machine aside from 3 issues.
One, LOCTITE everything. I mean everything. The vibrations are intense and it’s hard to keep bolts from backing off.
Two, it leaks oil. WoodMaxx sent a fresh reservoir and now it leaks worse. I can’t figure out where though.
Three, the dust cover over the oil reservoir/belts is a very tight fit. A few times of taking it on/off abd it begins to cut the hydraulic hoses underneath it.
Overall, I love it. We use it all the time and we are not polite to it. We use it hard and it keeps on working. We used to haul away 3 or 4 loads of brush a day in the 7x14x4 dump trailer and now it takes nearly all day to fill that trailer with chips.
PS, the chips are extremely fine. Bigger chippers throw out hunks of wood…my 8800 makes tiny little bits of wood. We use the chips for paths, erosion control, compost, ditch filler, cheap dirt…it’s changed my business completely.
I have a MX8600 with my 2025R. It's a great machine and, like you, I've been extremely impressed with the quality starting with the packaging and extending through every part of the chipper. You're gonna love it.
I bought the MX8600 last year and I love that thing. It's a great tool! And the packing they shipped it in is above and beyond the norm. I think it's the best implement I have bought. I did not know the Woodland Mills was built in China. Whew, dodged a bomb on that one. I thought they were built in Canada.
Bought same one...been very impressed with it.
I have the wallenstein 52 manual feed i bought around 2016 for my 1025r.
The opening will take bigger trees than the 1025r likes. I've put really crooked and Y shaped branches in it. I don’t have to break up the branches to much. Plus i rake up the leaves and fine twigs and run them through it.
I use the chipper every year multiple hours. I've made more chips than frito lay. I think the manual feed would be better but i don't work hard using mine. It cost 3000 dollars.
Why would the manual feed be better?
@@triciahill216
I meant the auto feed would probably be better. Sorry
I will be interested to see it perform with a different size tractors. Thank you, Tim.
Good morning!
I have the WC68 from Woodland Mills. I love it. I have had it for a couple of years and it is a joy to run. I have a tractor with 27 hp at the pto and I can't think of anything I've been able to fit into the chute that it wouldn't chip. The price point of the WC68 at $2999 made it much more practical to purchase. Anything larger than 3-4" in diameter in my mind is firewood. I'm not chipping 6" logs. Even though the Woodland Mills was built in China it was flawless when I received it. I bought it during the crazy supply chain shortage and it still got to me in two weeks.
I have a woodland Mills chipper as well as a sawmill, I think it is important to recognize customer service. I have not found another single company that had better customer service than Woodland Mills. They have even replaced parts for me when user error was found to be at fault.
I went with the Woodland Mills WC68, for the location of the feed control, my kids like to help and if they get to close the feed stops.
Wonder how this compares to Split-Fire. They seem to be highly-praised.
I feel silly for not having found this channel til recently. Best content for tractors/equipment from a perspective of just the regular dude. Awesome job Tim!
Thank you very much!
Since I got rid of my John Deeres, the WoodMaxx DC-1260 4" SELF- FEEDING GAS POWERED WOOD CHIPPER is very attractive.
For me woodmaxx was the only company with a reasonable wait time. Woodland mills was saying multiple months wait. Woodmaxx was also a littler cheaper for me at the time i think.
I’m definitely looking into one for my 8.5 acres. My boss has a 4 inch woodland mills he runs on his 25 hp tractor and it does great. I was looking to get the 6 inch version because I have a 35hp. But the Woodmax being made in the USA is a huge plus to me.
Looks like a great unit and looking forward to seeing it in action. Just wondering if you paid retail price (or the ttwt code price) on the unit or if it was subsidized by the manufacturer for you?
This is sponsored product.
Interested to see how this works on some of the higher hp tractors. I have the MX8800 and with hardwood a log larger than 6” or 7” is about all the tractor can do.
I have had my MX9900 for a couple of years now. It is by far my favorite attachment. Others say they would rather burn, well some dont really have a great option to burn. I have heavy forests with very little clear areas to burn, plus burning is extremely limited here. Only at night, only on GREEN days, and must have pressurized water source. With the mx9900 I can chip up a pretty large pile faster then I think i could burn it and I have chips to use.
What's your tractors PTO HP and how big have you chipped with it? Totally agree about burning and you have to babysit the fire for hours.
@@inspectr1949 It is a 2038R, I have chipped up to about 6" of pine. The reason you want a bigger opening is you have less trimming to do before feeding it. I think most people who hate chippers probably used ones that are too small and do not have a powered infeed.
It would be nice to compare this woodmax to the woodland mills TF810
The reason I subscribe to in the first place was that you don’t ask for subscribers. I wish I live close to you I’m disabled and working equipment was I did and as long as you can get to where your clay is smooth it will hold water but it is going to have to be bowl shaped. If you want it to be not smooth you will have to do that after you get it bowl shaped
Very interesting and good presentation Tim. After viewing I can see your thinking about it being the best value.. My concern is that they say no synthetics lubricants or how ever you put it. For me that is a disqualify item because I am a firm believer in synthetics over petroleum. Every single time. I use Amsoil in everything and I do mean every piece of machinery I own and have always had superior performance when I have changes to the Synthetic. I would not buy anything that I can't us Amsoil in, the difference has been so great over the last 25yrs. Petroleum is an inferior product that increases friction and wear and I won't use it and I know many like myself.. So the product and your advise is compelling,, however.......... So if there is no give with WOODMAX I don't see how to use it for me then. Any comments or advise??? Godspeed.....
My comment would be that this is not an engine. Very minor usage of the oil. No idea why they say no synthetics, but I see no reason to get uptight over it.
@@TractorTimewithTim I understand you comment. However it is just one of those things that each of us have that we believe & stick to. Mine is synthetic over petroleum......
Love seeing you showcase a product made in my backyard!
Good choice, Tim!
I bought the MX8600 last year shortly after buying my tractor. It never ceases to amaze me with what that thing is able to eat, even on my TYM T25. Be sure to step aside as you feed a log into it. When the roller grabs the log, it sometimes decides to thrash it from side to side, which can "surprise" your head! 😆
The pump has a swash plate inside that controls the flow looks like poor Cristy ran out of arms
That and the Bwise dump trailer and your in the mulch business. Very nice unit looking forward to its upcoming videos
I've got the Woodland Mills 8" chipper and love it. Your Woodmaxx DOES appear to have much less assembly required than the WM did, but the WM didn't require anything that a simple homeowner couldn't do to assemble it. I don't like the Woodmaxx's safety bar as much as the WM's though.
Also, you didn't get into the specs as far as how much PTO HP is required to chip a 9" log (if Woodmaxx even addressed that in their brochure/specs listing), where the WM one that I have said that to chip an 8" log/limb you'll need 60 PTO HP (if I remember correctly). So, I'm curious if your larger Deere will even have enough PTO HP to chip a 9" tree if you wanted to?
I am completely unfamiliar with the Woodmaxx's hydrostatic infeed vs. the traditional hydraulic infeed that my WM has. Unless I'm wrong, the larger hydraulic tank on my unit would be a PLUS, as the more liquid that you have, the longer it would take to overheat it? And I would think that the smaller 2QT requirement of yours would be more prone to overheating? But I'm FAR from a hydraulic/hydrostatic expert here, so I could definitely be wrong.
I'm anxious to see you put this to use, and get your (as well as my) impressions of it running.
Note that the WoodMaxx is using 10W40 motor oil, and not hydraulic fluid. That’s significant. In our use (MX8800) it has not had any issue with heating.
I’m not so much concerned about 9” log. Doubt I will want to chip that large. My issue in the past has been ‘forks’ in limbs not being able to fit through the opening.
@@TractorTimewithTim that's the reason that 8 got the 8" WM chipper. I have no desire to chip anything that large, but it takes in almost all of those branches that have "Y's" in them. Anything over 3" or 4" for gets split into firewood.
Tim, We’re getting ready to pull the trigger and buy a PTO chipper. Have you used yours yet? Any second thoughts about your WoodMaxx? Same answer if it wasn’t a “sponsored machine (I’m assuming WoodMaxx gave it to you for the promotional exposure)?” Thank you for highlighting these chippers!
I think it is the best. I have used it only briefly. Other commenters feedback reinforces my opinion.
Woodmaxx has removed my 5% discount. If interested, I would appreciate if you purchased via the link in the description
The comparable Chinese made Woodland Mills WC88 and TF810 PRO require a min 35 PTO HP but the USA made WoodMaXX 9900 is 25HP, wonder why the difference?
These ratings are sorta arbitrary, I suspect. Depends on size and type of material.
Nice WoodMaxx Chipper. Interesting model and price comparison. I have a Wallenstein BX-60, it's produced a lot of chips over the years with no issues.
I've logged a lot of hours on 2 different model pto chippers, the crary bearcat ch5540, and now the ch8540. No hydraulics, super simple, with sharp blades feeding is easy. Would love to try a model with hydraulic feed rollers, but I'll stick with my ch8540.
I have the MX8800 and I love it. I bought it for the reasons you point out. I do wish the in feed folded on the MX8800. If you need a hand on a video let me know.
Nice woodchipper! i choose last year for a wallenstein rippoff out of China. Payed 2750 euro ex vat for a double hydraulic feed with pto driven own hydraulic. Made 80m3 of chips with it and never failed. With the lower speed it destroyed my kubota 24hp b2150 pto inside 😢. after that on my dads 75hp jd 6020 tractor. took 5 inch logs x 6 meter on 1000rpm pto speed in 15 seconds. After that i bought a 35 hp jd 4410. it handels the chipper fine on 750 rpm pto. After the pto problems with the kubota, i also choose for a belt driven when i had to do it again. I only think it is not possible to chip 8 or 9 inch logs with only 46 hp. I think when you use your 4075r it stalls when you want to chip i inch logs. But i am very curious to see your opinion
Nice vid Tim, how’d it work out on your 3046r? I’m in the market, my lil (self feed) DR chipper is exhausting 🥵
Discover the Perfect Size Wood Chipper for Sub Compact Tractor | John Deere 1025R & Woodmaxx 9900
ua-cam.com/video/TUJ4LKAs_uU/v-deo.html
I am a Canadian viewer and a fan and sorry you got your facts wrong.
Canadian the Wallenstein is one of the nicest brands and your prices are wrong.
8900 Canadian which is like 6 grand american and I am guessing the 12 thousand one is the same.
Being Canadian made they are very well built and put together again the best in the industry
On the wallenstein site, it says $8980 USD for the BX52R.
What ‘facts’ did I get wrong????
I bought the 8800MX for my 2038R and absolutely love it. We have a tree farm and use it often. It rarely chugs or stops the tractor, unless we are being absolute dummies shoving in straight up firewood sized hardwood pieces. One pro of the 8800MX is that there are less knives, so less maintenance and the replacement costs are less. Still chips super fast. I think if you have more horsepower, say a 3046R, the increased number of knives on the 9900MX makes more sense.
Actually the way the more knives work is every other knife takes a bite of the wood. IE two inside knives and 2 outside knives, versus just 2 full length knives. This means each knife takes a bit smaller bite making it easier for a smaller engine for the given size.
@@hagak1679 Never realized that not sure how they do that unless there are 2 different sets of anvils spaced apart, I'm familiar with wood planers being a wood worker, when helical multiple cutter heads came out replacing the 2 or 3 cutters they require more HP as the multiple cutters are always engage in the wood.
@@inspectr1949 One anvil, but it is as wide as both knives (inside and outside). the 4 knives are 90 degrees apart and 2 are inside the flywheel and 2 outside the flywheel with some overlap. So as the flywheel spins a knife only takes out a little more then half the wood (if you have a piece as wide as the anvil).
@@hagak1679 Thank you, tried calling WoodMaxx for clarification but could'n't get anyone there to take my call. My machine is 24 years old and has 30 PTO HP so I don't want to overburden it but thinking ahead to the future when I'll be shopping for something 50-60 PTO HP.
@@inspectr1949 Just dont feed it too big of stuff, you will hear the tractor bog down just reverse the feed and continue with smaller items. 2038R can at best chip 6" rounds, that is with soft woods.
It would be interesting to know your conclusion for the best/better similarly attired chipper sized for a 1025/2025 sized tractor. Thank-you!!
Tim, I'm interested to see how your experience with the Woodmaxx differs from what I've seen on a few other channels. I know that Brock from Rockhill Farm was using a gravity fed Frontier model on his 2038. Bill from "Today in Iowa" was using a Wallenstein model similar to Brock's on a 1025. Both didn't have good experiences with their PTO chippers. One question I have is, what made you decide against a PTO chipper/shredder aside from the gravity style feed?
Thanks yet again Tim, you have me leaning DJ green and now Woodmaxx MX 9900. Have 20+ acres of towering red pine that needs to be thinned and milled leaving the top 20' that tapers down from 8" and full of branches that will need to be chipped, thought my 23 year old 29.5 PTO tractor was too small to handle any chipper with a capacity bigger than 6" so I'm looking at a JD 4066M to run the biggest chipper I can.
I have a Farmer's Helper 42S chipper which I believe is actually a Titan with Farmer's Helper branding. I had purchased it used for my 1025R and I kept it after upgrading to the 2038R. I believe it has a 42 pound flywheel and it accepts up to 4" material to chip. I find it is too short with the small frame leaving it too close to the ground and the driveshaft at too sharp an angle so I set it on top of a set of ramps when chipping. It is a bit too small for the 2038R. I'm guessing that the WoodMaxx 225 lb flywheel will be a great advantage. The 42S I have has a clogging problem. Leaves and small branch chips will repeatedly clog the ejection chute and I have to shut down to clear it. I'm thinking the WoodMaxx higher flywheel RPM's will lessen the tendency to clog by ejecting material much faster. Also it will likely through much farther with greater force so important that no one ventures into the ejection path. I find the wood chips are great to spread on my trails. As always this is another great and informative video.
Wish I had seen your well done unboxing video earlier when I was choosing; a little over 1 year ago. I went with a Farmer Helper 4" manual feed. It seemed to fit the bill and is built very rugged, although there were some 'fitment' issues I had to deal with. Not sure if all manual feeds are similar, but it can really 'shake, rattle, and vibrate' your hands at times when trying to get things fed in. It generally feeds 'OK', but isn't near as good as a hydraulically driven feeder I'm sure. I really like the one you choose and may even sell mine to get the MX-9900 simply due to my age and liking of the hydraulic feed AND the lower and straight chute the WoodMaxx has. One of the biggest reasons I went with my original choice was its min. HP rating and I only had my BX, so limited myself to 4" wood; but am now procuring a 60HP tractor, so no worries about HP requirements. Thanks, Tim!
Very nice chipper! Love the hydrostat feeding system.
The chipper I own though is a chipper/shredder from Wallenstein, the BXM32. I love it! I wanted a chipper/shredder, and there was not a lot on the market when I bought it, and I always try to buy made in Canada or made in USA products. I ended up with that unit. It is about 15 years old, and good as new.
Always like your videos! Keep up the good work! Never enough tractor videos! :)
Your instincts are proven by simple math. 6” X 10” = 60”sq. … 9” X 9” = 81”sq. None of the others come close to the square inches op your machines feed opening. I’d love to have one of those.
All the cutting Vibrations flow threw the pto into the gear Box. Chippers with a drum as cutting system and a Belt drive are not so tricky for your 1 series.,your deere will life länger. Chipping is a heavy job for small compact tractor
dang. Already up 1000 in a year
Buy now before it gets worse!
I had a Merry Mac style chipper shredder that did a good job but as you pointed out early in your video all the branches had to be lifted to the hopper and there was no hydraulic feeder. Fairly clean branches would gravity feed but most branches had to be spoon feed into the chipper.. Brush was usually the same issue. Some times it would grab the branch violently and pull it out of your hand. Also the chip discharge would clog more often than it should have. The chipper chipped just fine but the feeding and discharge left much to be desired. I think you identified the important features on a PTO driven chipper. Looking forward to seeing it in action. (BTW - its called a swash plate)
I bought the Woodmax WM 8M 6 years ago. works great and good customer service. Run it on my JD 5055E. No regrets buying it.
Ken from bolt on convinced me to go with the 9900 after I was looking at cheaper and smaller units. Much to my wives frowning I bought one. It is a beast. Can't go wrong with buying bigger than you think you need! He might not have gotten the packaging we did - but he also I think bought pre covid and paid a lot less!
We left ours bolted to the pallet!
A few years ago I got one of their TM-86H chippers that I drive with my 1023E. The chipper is slightly more capable than my tractor but as long as I don't go too crazy with the wood size I've been VERY happy with it. I burn the bigger stuff but even though i do like keeping a small brush pile as habitat for the smaller critters (well away from the house), I like making my own mulch also.
Pair this with pallet forks and 1,000# bulk sacks, and you can cleanly catch all the debris and repurpose it elsewhere. 👌
I had to cheat and look at the website for a video. Oh boy! that is awesome. Just keep young helpers away from it as I've heard of stories of kids getting dragged into those type of feeders. Odd I just sold my small chipper shredder this am and talking about a 3pt unit again. I had one in the past but didn't have shredder option. That part is handy for clumps of yard wasted and spent plants to make nice compost material. Can't wait for your demonstration video.
We have been disappointed with performance of our stand alone Woodmax. Their customer support is outstanding but we can't get the blades placed correctly, because it always jams up and we are below the spec on what we put into it. I can only do so much mechanicaliy speaking so we are going to sell ours. We will wait and see how this pto one works on your channel. Especially blade placement.
I got the mx8800 it is a beast my 45 horse mf20 industrial runs it easily the infeed drive is powerful and it devours wood.
Woodland Mills just came out with this:TF810 PRO PTO Wood Chipper
$4,599.00
Significantly different style. Will be interesting to hear reviews of it.
Agree@@TractorTimewithTim
The more reviews that come out on the Woodland Mills TF 810 the better the WoodMaxx 9900 looks, your research is spot on.
This company is just down the road from me(35min). Been there and saw the operation. I am sure you will be very happy.
I have the WM-8H for 5+ years now and have run tons thru it. Have not had many problems other than normal maintenance / belt tension / blade sharpening's. The worst's are the lower 3-pt lifting arms twist over time due to lifting / carrying the weight of the machine I've had to make my own replacements. The tension spring L bracket connections at the top are somewhat thin and break off after a while due to the bouncing during feeding if the tension is set higher than what shipped at.
Now:
How easy to access to unclog ?
How easy to change blades and how many blades?
Hopefully we’ll never clog it! :-)
Seriously, we’ll show this type of detail as time passes.
I have a 60" Woodmaxx flail mower. Great product and the shipping crate was made of angle iron bolted together. After removing the mower I "rebuilt" the crate and use it to store my tractor bucket on top and slide the forks underneath.
Is there going to be another video coming soon that shows how the 2038R handles this attachment?
Hopefully.
For me the safety bar is a big issue. Plus woodland is the only one that offers a trailer hitch, plus the wc88 comes with a chainsaw mount.
25hp PTO?
Good comprehensive review. Look forward to seeing you put it through its paces. In my neck of the woods, the match works pretty well. Blessings.
I got my dad a Woodlands Mills 4 inch because he has a small compact tractor. Plus it had the auto feed. Self feed can work and bet you to death