Here is how I've replaced a faulty glow plug on Audi A6 C7 2016, 2.0 TDI. OBD2 scan diagnostics showed error code P0671 that indicates bad plug on cylinder 1.
To prevent cross threading, ALWAYS go anti clockwise first until you feel a click. Then you know the threads are aligned and you can proceed to tighten….
Thanks for the vid. Was trying to install the bracket for a p2015 code and found several videos with the glow plug connector already removed without showing it. Had not done it before and being quite tough I thought i was forcing something i shouldn't etc.
Not really, since it is very similar as all the other cars. Just make sure master does not run dry, otherwise you will need to bleed the whole system using VCDS.
Hi. Did you have to remove the crankshaft sensor on yours or not yet? I’m on 186000 km and it started to fail, confirmed by VCDS, mine is also a 2016 A6 estate 2.0 TDI Ultra, 190 bhp, engine code CNHA. Do you happen to know if the crankshaft sensor is located just next to the oil filter housing or somewhere else on this engine? Thanks.
Audi is a crappy car maker. I have the c7 2.0 tdi and they all seem to have faulty power steering modules and endless malfunctions.They are junk after 2 years. Do you know where i can buy a replacement connectors?
i got p068400 code on a6 c6 , but no check engine lights on, only longer takes to start car in morning, neither lights up glow plug light, should i change glow plugs as 1 seem off, or relay ?
To prevent cross threading, ALWAYS go anti clockwise first until you feel a click. Then you know the threads are aligned and you can proceed to tighten….
Thank you for very clear video, without BS. Really really appreciated your simple and concise presentation! 👍🎖
Thanks for the vid. Was trying to install the bracket for a p2015 code and found several videos with the glow plug connector already removed without showing it. Had not done it before and being quite tough I thought i was forcing something i shouldn't etc.
Was doing exactly the same thing but after putting everything back together car went to limp mode and all 4 glow plugs have electrical fault
Love what you are doing brother respect.
Very very concise - excellent video
Does this model coming with glow plug pressure sensor? I am curious if my A4 B9 2016 2.0 tdi have it
Do you have any video about how to change brake fluids ? For a6 c7 ?
Not really, since it is very similar as all the other cars. Just make sure master does not run dry, otherwise you will need to bleed the whole system using VCDS.
I followed this video... did each wheel individually, make sure master does not run dry, keep it topped up!!!
ua-cam.com/video/N70h87PMPrA/v-deo.html
Hi. Did you have to remove the crankshaft sensor on yours or not yet? I’m on 186000 km and it started to fail, confirmed by VCDS, mine is also a 2016 A6 estate 2.0 TDI Ultra, 190 bhp, engine code CNHA. Do you happen to know if the crankshaft sensor is located just next to the oil filter housing or somewhere else on this engine? Thanks.
Hi, is it the same way of opening the glowplug cap for 4 of these or the 4th one is different. please advise. Thanks
Thank mate i Ben look that much long for it
Super video! Thank you!
Does glow plug have anything to do with black smoke in exaust?
Well done 👏 ✔️ 👍 👌
Hey i have this problem, But did your engine * Ticking sounds* When u had this problem ? :)
Ticking will be injector seals not glow plugs
Excellent
Thank You :)
Hi,
do you know which glow plug (if any) is the one with pressure sensor?
Thanks
Yes, one of them has a pressure sensor and is much more expensive. If I remember correctly it is on cylinder 2, but could be elsewhere (3 or 4).
@@sunkazz Pressure sensor is cylinder 3... I was told by TPS Audi approved spares company on Audi A6 C7
Does all glow plug need pressure sensor as i have a6 c7 150ps. I need buy online so please guide me
Audi is a crappy car maker. I have the c7 2.0 tdi and they all seem to have faulty power steering modules and endless malfunctions.They are junk after 2 years. Do you know where i can buy a replacement connectors?
i got p068400 code on a6 c6 , but no check engine lights on, only longer takes to start car in morning, neither lights up glow plug light, should i change glow plugs as 1 seem off, or relay ?
I have the same problem and cant find the answer
@@rcman000 wiring was Wrong so fixed the wiring to glowplugs and all working 👍
@@S1L3NT__ I'm still searching and can't find the issue
get some good electrician and will be ok mate @@rcman000