My Dolls House Diary Tutorial # 16 - 1/12th Scale Coffee Table
Вставка
- Опубліковано 18 гру 2024
- www.etsy.com/u...
/ littlebitsandpiecesbyj...
/ littlebitsandpiecesbyj...
@little_bits_n_pieces_by_julie
In this tutorial, I show you how to make a trunk-style coffee table and how to finish it using a bleached-wood or driftwood style paint effect. This is a fairly easy make and a lot of fun, too.
If you enjoy this tutorial, you will love my books. I have published five so far and they are all available to order from my Etsy shop, or direct from Amazon - just search for Julie Warren.
Cutting List
COPYRIGHT © 2020 JULIE WARREN
This design is protected by copyright law and is not intended for commercial reproduction
For this project, I recommend a craft wood such as Obeche or Basswood
1.5mm (1/16 inch) Sheet:
87 x 30mm (3 27/64 x 1 3/16 inches) - Cut 2 - FRONT & BACK
63 x 30mm (2 31/64 x 1 3/16 inches) - Cut 2 - SIDES
87 x 63mm (3 27/64 x 2 31/64 inches) - Cut 1 - BOTTOM
100 x 76mm (3 15/16 x 2 63/64 inches) - Cut 1 - BASE (Cut after construction of the coffee table, which will ensure an accurate measurement).
87 x 5mm (3 27/64 x 13/64 inches) - Cut 4 - FRONT / BACK HORIZONTAL MOULDINGS
63 x 5mm (2 31/64 x 13/64 inches) - Cut 4 - SIDE HORIZONTAL MOULDINGS
20 x 5mm (25/32 x 13/64 inches) - Cut 10 - VERTICAL MOULDINGS
2.5mm (3/32 inch) Sheet:
100 x 76mm (3 15/16 x 2 63/64 inches) - Cut 1- LID *
86.5 x 62.3mm (3 13/32 x 2 29/64 inches) - Cut 1 - LID INSERT *
*Cut after construction of the coffee table, which will ensure an accurate measurement.
5 x 5mm (13/64 x 13/64 inch) Strip:
30mm (1 3/16 inches) - Cut 4 - CORNER POSTS or LEGS
COPYRIGHT © 2020 JULIE WARREN
This design is protected by copyright law and is not intended for commercial reproduction