Brick It Thin Brick Installation System
Вставка
- Опубліковано 30 чер 2017
- Brick It, Thin Brick Veneer Installation System. Video talks about how to install thin brick tile using Designer Metal Grid (DMG) system. Its a perfect product for interior and exterior projects such as restaurants, accent walls, hotel lobbies, chimneys, etc. These are real thin bricks and not fake, faux or brick imitations. Our New York Used Brick is the star of our shop. It has been reclaimed from historical buildings that ere demolished in the New York Metropolitan area. Contact us now with your next remodeling project. brickit.com
Thank you for watching! - Навчання та стиль
Looks amazing!
That looks very good. I installed a system in a real New York club just like that. It was great, but the sound had too much high end reverberation. But I love the Spider-mancave.
L
One of the best videos on UA-cam!!!
i love this..warm and inviting..
Looks like one could make a decent living installing these.
I’m thinking this can be used for a brick ceiling. Secure the metal frame work to the ceiling in a pattern of so 4 corners come to a center point at a light fixture or ceiling fan.
Most new glues stick on contact. This can be done! Now I need is to get the wife on board.
Simply GREAT !!!
goble worldwide huiilpon. L
Ppl
Lllllll
goble worldwide b
Wreaths
Ew
goble worldwide
Double work☝
cool
Do you have this in colombia
This is very cool! Thinking about using it in my basement. What is the function of the bracketing system behind it? Why couldn't you just glue the bricks directly to the wall? Would it just tear the paper off the drywall? Too heavy?
I’m wondering this too
I’m guessing if it’s gyprock/plaster the weight will just peel off the wall
My guess is that you’re correct about the tearing of the drywall but also you don’t have to worry about checking for planeness for each row of bricks
Appropriate for outdoor use?
The pro masons installed this on a court House we did near White Plains NY , they complained the whole job ,said it would have been faster to install real brick
И получилась трёхслойная звукозаизолированная и довольно красивая стена: слой шитрока, слой жести и слой плиток, срезанных с кирпичей.
Can it be used on the exterior? It would probably look nice on a foundation.
it wouldnt last the movement of the surface would crack mortar joints
B G Rosa H
@@moorishamericanpatriot8536 We use it on the exterior of homes all the time. That's what it was made for!
@@moorishamericanpatriot8536 0+000h opp ud ok sg hu aufazgihkc
it is very nice...but looks like very expensive .......
How did you do the soldier course on the top row with the grids?
Cut the grid in 7 1/2" strips and run it vertically above your running bond pattern would be my guess.
just wonderin can paint be mixed into motter to give the job a pop ....
I do not recommend it.it will make the mortar weak... meaning cracks easy...I do this for a living so take my word
I want this but live in the UK, do you have stockists here?
Glen Wells .(and/;l
Glen Wells ，，
How come the plug receptacles weren't shown. Would I have to cut into the wall pulling out the box to have it flush too wall?
Our legal deportment dose not allow us to advise on electrical work as we are not licensed to do so, but there are simple ways top make the receptacles flush.
@@thinbrickveneer Hello! Would you mind if I feature it on UA-cam with a credit?
Now that is awesome what are you charged for something like that for square foot?
But...how much is the project?
I love it!!! Looking cool, nice and 100% fancy 😉
Elizabeth Ruiz
Per square feet
Elizabeth Ruiz $11-$15 square feet
Cutting bamboo flooring
Looks great except for the giant toy.
I liked it before the brick
yes sir
With all that metal on the walls doesn’t it impact Wifi or even 4G? Since this is a media room you’d have to have a 2nd router installed in this room so it could pick up a signal. I guess it would be ok if you used an 8mm film projector or a slide projector to project on a screen. Does anyone even know what 8mm film or slides are? LOLOL.
The bricks look great but I’m wondering why the bricks can’t be adhered directly to sheetrock instead of building the metal substructure. That seems like one extra, unnecessary step. If I’m missing something please enlighten me. Thanks. The brick wall looks great btw!
can it be used on exterior?
Yes.
I also highly suggest you do not put a hard floor in a theater room, just saying.
jeez ma
Where can I buy those metal for bricks installation?
Please call 631 244-3993 option 1, or go to brickit.com
Where can I buy the metal?
Henri Rahmon you don’t need the metal.. just install like ceramic tiles
From Brickit.com, the makers of the video.
@@porkchop1343 -- I think that's a bad idea. Thin-brick installation panels are better than just direct application for a couple of reasons -- not least of which because they have the ledge-rows to keep the courses straight and to provide support for the thin-bricks. Also, for exterior use, you'd want to have an air-gap, and a moisture barrier, which would be much more complicated if you were going to just install the thin-brick like ceramic tiles.
So, cant you just put bricks on the wall without the metal?
Yes, you can
2:34 You mix water. How do you mix water?
Take two parts hydrogen, add one part oxygen. Stir very carefully.
Can you just glue the brick to wallboard? Not use the metal?
I do this for a living and the only time I used this cheep rip off style....no we did not use the metal...so I'm sure you can.positive you can.we did it for a profile for a fire place.
I can't remember exactly how we did it it was years ago but I know we didn't do it like that.there is a cheeper way
I’ll put this brick with out the plates and it will still look the same
Crooked Level It looks more expensive than regular brick for exterior and not as durable.
...Back row folks cant see.... Just saying.
When you reinforce in six seige
Do you just ever click on an ad video on purpose because you just say, brick it?"
Why do people prefer this as opposed to natural stone or tiles? it is no different than installing veneer, and all a veneer install requires is stapled felt paper and wire mesh with a concrete scratch coat.
At least, these ones don't use polypropylene - the Grenfell Tower ingredient - the fire enhancer. While I like the slat system, I do not like the fact that there is not much useful information regarding facts/data. What happens when it's exposed constant thermal transition between extreme hot and cold - such as the exterior in Florida and Alaska or even UK? What if they start peeling off when the metal starts heating up and cooling off like that on the roof of your car? There is not a brick stacking upon another one like in a traditional system. Everything, including the future of your home, which should last 150 years is reliant heavily on Locktite's strength. We need data, not just nice pictures. What do you think?
BROWN BRICKS
how do you use a mobile phone in a room like this? It's a Faraday cage!
We are not experts in the mobile phone field, but it works just fine.
I COULDN'T GET THE COMPANY (BRICKIT) IN NEW YORK TO PICK UP THE PHONE, TRIED FOR TWO DAYS. TO BAD LOOKED LIKE AN GOOD PRODUCT
I didn't see him install an L shaped outside corner brick. That's why I kinda clicked on the video lol.
Why am i watching this?lol
Dud
Elizabeth Ruiz call me
ill install it for you
If I had their money I'd burn mine.
I install home theater and I HIGHLY suggest you do not put brick on the walls.
Yeah -- I was cringing at that too; that room is going to be acoustically *terrible* . Still, it sounds like Brickit didn't have a say in that; they did it for a client who wanted it.
The "finished" walls look like the unfinished walls of my room before we put plaster so we could paint, why not leave the nature brick from the beginning, this makes no sense to me.
It's probably a wood framed house trying to look cool inside.
Or a basement in which the exterior wall would be concrete
S SN QN I agree.. he is a big idiot
Lmao... shame shame... name calling is not cool. But it is funny... guess that make me an idiot. 😒
your kidding ? right. between the glue and metal hanger you could hire a real brick layer!
You won't get what you see on their sample boards. Instead of a white wash, it looks like someone dumped paint all over them, with excessive dripping on the faces. I had to scrub each brick in water to make it look like their display board. Also, instead of buying 10% for waste, you should buy 20% to compensate for the brick piece that are bowed like a banana and you'll be sold an extra 10% on top of that from their crooked salesman (even though you handed them the exact dimensions of your project to calculate). You'll be sold an exorbitant amount of pointing mortar as well and they won't take ANY returns, not a thing, even though their website states no returns on brick. I'd steer clear of this business. Tried them out first with a fireplace before spending tens of thousands of dollars on the front of my house and I'm glad I did...
глупость несусветная