@@bgmsindia2872 I've broken many Yonex strings while both playing and stringing using an older gamma hand crank machine if I go over 20pnd tension strings tend to snap.
@BINGO Playz actually, no. Most badminton shop will string it for free when you buy their racket (in my country). You have to pay for the string itself tho. Some shop don't even need you to buy the racket at their shop, they just give free stringing service for buying the string at their shop.
UA-cam video shows in teaching pulling a racket string are all just besic, And sorry, I'm only giving input, I'm not a player, but if you pull the perfect racket strings, you have to know what we're going to do: 1. There are 2 types of rackets, in the past the rackets were iron (C-8, C-9, etc.), the frame was stable only up to 25 lbs, but the iron material was able to withstand a pull of up to 50 lbs and the body would not be deformed, but now the racket is carbon (original) the frame is able to stabilize between 30Lbs to 38Lbs (there is a racket thatrecommend up to 45 Lbs), however, the carbon material will be damaged if pulled above 30 Lbs, especially if you pull it the wrong way. so my conclusion, how to pull the 2 types of rackets there must be a difference in how to pull it. Pulling first from the center or from the side is not the problem. 2. Player complaints: play 1 to 2 sets of decreased pulling tightness (some don't get to the first 15 points). also the vertical string in the middle always shifts, and the string breaks quickly. That's what you need to pay attention to before you do this job. If you do it for 30-40 minutes, the job of pulling the strings is KODIAN's work. The above problem must have a solution, how to perfectly pull the badminton racket strings so that the player's performance does not change from playing to playing. IN MY EXPERIENCE IN 50 YEARS I HAVE BEEN ABLE TO OVERCOME ALL THESE PROBLEMS, IT REQUIRES PERSEVERANCE, PATIENCE AND SACRIFICE. pulling the racket from the center or side is the same Pulling the 2 knot racket is more accurate and stable. Pulling a 4 knot racket has risks, it can be unstable if it's pulled carelessly" and correctly. Manual machines are no different from digital machines if they are done well (like digital and manual scales, the weighing size of 1kg remains the same) The first thing to do before the strings are attached to the racket is that it must be safe between each hole through which the strings pass so that there is no hesitation in pulling the racket strings. and there is still a continuation of stages 2 to 3 to 4 so that the installation is perfect and does not injure the angle between each hole the string passes through, especially the vertical strings which often create hole defects in the racket if pulled incorrectly "This is only a solution not for business people looking for profit""""""
Question please... Why do you have to increase the tension by 10% on the cross strings?? I have gotten my rackets re strung many times in the past and i thought they all have to be of the same pressure both vertical and horizontal strings... Were we doing it wrong??
That 10% addition on crosses is to make up the increased tension on mains. As you start to go through crosses, mains are getting slightly tighter on each pull. That's the added stretch for mains that the weaving does. I hope this makes sense 😁
Lorenzo, your doubt is absolutely justified. If any object on Earth that has the shape of an oval and has a mono structure is squeezed along a small "diameter" (in our case, it is more than kg to cross string), then the oval object will easily lose its shape. It will become squished. Whether it's rackets, or sitting over the toilet ... Carbon, plastic or adamantium :-) ... It is for this reason that all the top string manufacturers have started producing binary kits. This idea does not give any superiority in terms of improving the characteristics of a string bed. This is NONSENS. If you make 0.7 main and 0.66 cross - then this will give the property 0.68 at the "output". It's elementary! But it is important that thinner cross strings exert less pressure, as they have a higher stretch ratio. The shape of the rim and all the know-how put into it will be preserved and implemented. Happy New Year!
Question though..once you've locked the racket on its frame the shaft is then noticeably shaking if moved or touched. So as you're stringing it what happens if you accidentally touched the base of the shaft or the holder or the grip as you're moving/rotating the racket in 360 degree horizontally? Will that 'ruined' or in anyway affect the racket?
to ensure the different tensions in the main and cross strings I think the two piece string method is much better and therefore to prefer! though the knots and the stringing setup in the lower frame is much more beautiful with the one piece method
@@christophergotz2222 You can still achieve different tensions for the main and cross with the one string method, each section of the string will still hold its specific tension as the friction around the bend in each grommet prevents that!
Badminton is everyone's sport! Anyone can play badminton and I love to play badminton, but due to work I can't play it anymore. I'm so sad about that! Is someone like me? Anyone like badminton like me?
We have a query from a member which we don't know the answer to - which stringing technique is better double stringing or single and why please - thanks
Both are acceptable, however Yonex and most other brands recommend the double stringing technique. I found my strings felt better (subjective I know) when using the 2 piece 4 knot technique shown here, also I found there to be less tension loss over time than with the single stringing technique. (This was tested with two identical rackets, strings and tensions over a period of a month, alternating rackets between games)
I've just broke the frame of a badminton racket whilst stringing the mains. My worst nightmare as it's for a customer. Hasn't happened before so I guess there was a crack I didn't see. However, is there and exact science to mount position, and how tight I should mount racket? Break happened at about 9 o clock on frame whilst pulling last 2 mains, (Yonex loop method)
Hi I am using manual stringing machine pls upload some tips on manual drop weight machine pls upload how to retain the original shape of the racquet, and pulling for the string tension Thanks
Hi SBApp. My experience is over 25 years. Stringing/carbon repair. I can make a badm.racket out of 20 or 30 pieces of string. 10-13kg. This is necessary when beginners or children are breaking the string every day (saving money). 1.You can scientifically explain why cross strings have more tension? 2. Your first tension step - 10kg for 2 main central strings... You are sure that both strings are gaining 10 kg. each? You know exactly the electrical scheme of the machine?
I once had a racquet come back with new strings and the whole head was pulled into a short wide shape, they obviously didn't increase the tension on the cross strings, so annoying.
Shaft is impossible to repair, I have however, repaired over a hundred racquets with broken frames, some with two breaks, and they play good afterwards!
So in this video, he tensioned the strings one by one (weave and pull, then on to the next). I saw another person fully weave the mains and crosses first, by hand, and then tensioned just one string at each tie points. 🤔 Which technique is better?
I've been string racquet for 8 years, I like to full weave both main and cross with one continuous string, then tension one by one, much easier as the string go through the grommet before there is tension which can be difficult and pron to damage, also there's only two knots, and it holds the tension much better as invariable the there is loss of tension with each knot!
Hi I am sorry but on the 3:26 where you do the starting knot, you just made the knot on its own string but not even tie on the main string? is that correct ?
Who else though that the way he was waving the string was really satisfying?
Me
Sound gives the happiness for the players
Yes
Agree
Best stringing video i've seen so far
idk why, i'm here honestly... from cooking videos to stringing
Lol, you are all rounder
This guy will never worry about string breaking 😂
Cause he's using Yonex strings, that's durable
@@bgmsindia2872 I've broken many Yonex strings while both playing and stringing using an older gamma hand crank machine if I go over 20pnd tension strings tend to snap.
6:38 sound gives happiness to the players❤
stop stealing others comments
@@jairajroy8830 🤣
Damn. I really should appreciate the free stringing service.
Where??😁
@@arunraghunath96 usually when buying a new racket they string it for free.
@@bassagent97 They have certainly never strung my racquet for free.
You guys getting that for free??!
@BINGO Playz actually, no. Most badminton shop will string it for free when you buy their racket (in my country). You have to pay for the string itself tho. Some shop don't even need you to buy the racket at their shop, they just give free stringing service for buying the string at their shop.
Personally I prefer to use one set of string.
I agree with the pre-weave on the crosses.
FYI 10.00 kilos = 22.05lbs and 11.0 kilos = 24.25lbs.
bro but they too loossseeee
@@dhairyasingh9783
I prefer my racket strung to 25lbs tension (11.3kg)
Wah great knowledgeable, my childhood dream to see this....tnx you tube...❤
The sound of the strings at the end ... uuuhh its very satisfying
Yup. I might have a racket sou d fetish lmao wtf 😂😂😂
The way he weaved the strings looked satisfying
The climax string sound, uff awesome feeling.
Im sure you were very curious as a kid as to how they strung the rackets
UA-cam video shows in teaching pulling a racket string are all just besic,
And sorry, I'm only giving input, I'm not a player, but if you pull the perfect racket strings, you have to know what we're going to do:
1. There are 2 types of rackets, in the past the rackets were iron (C-8, C-9, etc.), the frame was stable only up to 25 lbs, but the iron material was able to withstand a pull of up to 50 lbs and the body would not be deformed, but now the racket is carbon (original) the frame is able to stabilize between 30Lbs to 38Lbs (there is a racket thatrecommend up to 45 Lbs), however, the carbon material will be damaged if pulled above 30 Lbs, especially if you pull it the wrong way.
so my conclusion, how to pull the 2 types of rackets there must be a difference in how to pull it.
Pulling first from the center or from the side is not the problem.
2. Player complaints: play 1 to 2 sets of decreased pulling tightness (some don't get to the first 15 points).
also the vertical string in the middle always shifts, and the string breaks quickly.
That's what you need to pay attention to before you do this job.
If you do it for 30-40 minutes, the job of pulling the strings is KODIAN's work.
The above problem must have a solution, how to perfectly pull the badminton racket strings so that the player's performance does not change from playing to playing.
IN MY EXPERIENCE IN 50 YEARS I HAVE BEEN ABLE TO OVERCOME ALL THESE PROBLEMS, IT REQUIRES PERSEVERANCE, PATIENCE AND SACRIFICE.
pulling the racket from the center or side is the same
Pulling the 2 knot racket is more accurate and stable.
Pulling a 4 knot racket has risks, it can be unstable if it's pulled carelessly" and correctly.
Manual machines are no different from digital machines if they are done well (like digital and manual scales, the weighing size of 1kg remains the same)
The first thing to do before the strings are attached to the racket is that it must be safe between each hole through which the strings pass so that there is no hesitation in pulling the racket strings.
and there is still a continuation of stages 2 to 3 to 4 so that the installation is perfect and does not injure the angle between each hole the string passes through, especially the vertical strings which often create hole defects in the racket if pulled incorrectly
"This is only a solution not for business people looking for profit""""""
it's really helpful for us! thank u brother ♥
Thank you for the awesome but simple video. What's the total length of string you used to complete this racket?
He said 5.5m for the main, and 4.5m for the cross. So, 10?
For a 1 piece restring the total used is usually around 9m.
I like this type of video thanks for sharing this amazing video 🙏
Omg..this is lots of work.. I thought there would be a machine for this purpose..
When you should take a nap on that time and boss calling for over time be like
Very nic धेरै राम्रो
His eyes creeps me out
yeah right? wtf is wrong with his eyes 😶
Looks like he doesn't enjoy his job😂
@ABC XYZ ye
True
@LEP enjoying a job and being a proffesional at it is completely different things
So informative and useful to watch
Hey kids stop playing guitar with the badminton strings and appreciate the hardwork done by him
Thanks it is very help full
I got satisfaction with that sound in last😌
My racket is also arcsaber 11 and we have the same color
How is it?
@@cubenxesports6589 good
Heard about it's smash ability is weaker than other even balanced rackets out there.. Is that right?
U need to give the app link in the description
Just type it in on play store
Question please... Why do you have to increase the tension by 10% on the cross strings?? I have gotten my rackets re strung many times in the past and i thought they all have to be of the same pressure both vertical and horizontal strings... Were we doing it wrong??
That 10% addition on crosses is to make up the increased tension on mains. As you start to go through crosses, mains are getting slightly tighter on each pull. That's the added stretch for mains that the weaving does. I hope this makes sense 😁
Lorenzo, your doubt is absolutely justified. If any object on Earth that has the shape of an oval and has a mono structure is squeezed along a small "diameter" (in our case, it is more than kg to cross string), then the oval object will easily lose its shape. It will become squished. Whether it's rackets, or sitting over the toilet ... Carbon, plastic or adamantium :-) ...
It is for this reason that all the top string manufacturers have started producing binary kits. This idea does not give any superiority in terms of improving the characteristics of a string bed. This is NONSENS. If you make 0.7 main and 0.66 cross - then this will give the property 0.68 at the "output". It's elementary! But it is important that thinner cross strings exert less pressure, as they have a higher stretch ratio. The shape of the rim and all the know-how put into it will be preserved and implemented. Happy New Year!
Stringing for goh v shem arcsaber 11.good job.
The sound tho. Pung pung pung
What's wrong with it. All strings doesn't sound the same. Compere bg65 10kilos to bg66 10kilos. Witch sounds higher??
@@jerryhellstrom30 whats wrong with my comment? I like the sound,thats all
Ting ting ting
Sounds good 😂
"pung" in Sweden means ballsack "Ballsack Ballsack Ballsack" heuheu :D
Some very good tips here.
I will use.
Question though..once you've locked the racket on its frame the shaft is then noticeably shaking if moved or touched. So as you're stringing it what happens if you accidentally touched the base of the shaft or the holder or the grip as you're moving/rotating the racket in 360 degree horizontally? Will that 'ruined' or in anyway affect the racket?
dw the racket can defeat naruto
Can you repair my Heaven racket..
Been stringing for two years but I’ve only ever used the once piece string method
to ensure the different tensions in the main and cross strings I think the two piece string method is much better and therefore to prefer! though the knots and the stringing setup in the lower frame is much more beautiful with the one piece method
@@christophergotz2222 You can still achieve different tensions for the main and cross with the one string method, each section of the string will still hold its specific tension as the friction around the bend in each grommet prevents that!
Badminton is everyone's sport! Anyone can play badminton and I love to play badminton, but due to work I can't play it anymore. I'm so sad about that! Is someone like me? Anyone like badminton like me?
Would appreciate a video of 13kg string tension to be uploaded :)
@Bikazoom Sales Yup
Nice explanation
cex the sound ❤️❤️❤️ love it 👍👍
Thanks for the video, Can you please let me know Yonex Exbolt 63 is good for playing with feature shuttles
Good video.
Well explained.
Awesome Bro #GREAT.
What model of stringing machine is that? Great video by the way
That crisp sound of string
That's so satisfying.
Now I need to learn how to use the machine properly
after you string are supposed to pull the main string to test if the tension is tight?
We have a query from a member which we don't know the answer to - which stringing technique is better double stringing or single and why please - thanks
Both are acceptable, however Yonex and most other brands recommend the double stringing technique. I found my strings felt better (subjective I know) when using the 2 piece 4 knot technique shown here, also I found there to be less tension loss over time than with the single stringing technique. (This was tested with two identical rackets, strings and tensions over a period of a month, alternating rackets between games)
it's a lot confusing than i thought it would be
Now i know why stringing cause so much in malaysia
string is cheap , labour is expensive 😂
If the players need to have their rackets to be strung with 13 kg, how many kg main and how many kg cross?
Tks
I think he said 10%more
Awesome👍👍
I am also using Yonex carbonex 8000
That is arcsaber 11
When you work as a stringer and does like 8 a day, go home and watch someone else string.. I think ive become a workoholic?
nah man to me you look like a person who just loves making badminton rackets
Can we strung a racket with 2 different colour strings
Yes
Yes, wy not you can't??
Sound was players satisfied with that sound
Really need this racket
Halim stringer is legend
Very nice bro but I do this work by only fingers
I've just broke the frame of a badminton racket whilst stringing the mains. My worst nightmare as it's for a customer. Hasn't happened before so I guess there was a crack I didn't see. However, is there and exact science to mount position, and how tight I should mount racket?
Break happened at about 9 o clock on frame whilst pulling last 2 mains, (Yonex loop method)
Sir can change the shape of frame round to ovals shape
Hi There i use a Li Ning N90-III Badminton Racquet i would like to know what is the best string and tension for it
Mantap cara masangnya...
Good 😌
In india people don't string like this even though we are ready to pay. I hope this is the standard way of stringing.
Please suggest best string for li ning windstorm 78 & string tension of this racquet
Gread work
Have you ever used or strung with natural gut? Seems to be still big in tennis but has fallen out of favor in badminton.
সবচেয়ে দামিয়া রেকেট
exelent bro
How much tension use in this video?? plz answer anyone
How much lbs making badminton use this video
Hi I am using manual stringing machine pls upload some tips on manual drop weight machine pls upload how to retain the original shape of the racquet, and pulling for the string tension
Thanks
Bro super
Hi SBApp. My experience is over 25 years. Stringing/carbon repair. I can make a badm.racket out of 20 or 30 pieces of string. 10-13kg. This is necessary when beginners or children are breaking the string every day (saving money).
1.You can scientifically explain why cross strings have more tension?
2. Your first tension step - 10kg for 2 main central strings... You are sure that both strings are gaining 10 kg. each? You know exactly the electrical scheme of the machine?
Satisfying sound👍
Who watch this video and repair own badminton 😎
Me Arcsaber 11 old keran poko nya tarikan sampai 30lbs vertikal and horizontal its strong fame and good.
With mesin digital
Which side more tantion vertical or horizontal
Very Good ~~
Interested in badminton stringing.where to get this stringing machine
👍👍👍👍👍👌👌👌👌👌👌superrrrrrr awesome thanks dear...❤❤❤❤👍👍👍👍👍👍👍👌👌👌👌👌😁😁😁
I once had a racquet come back with new strings and the whole head was pulled into a short wide shape, they obviously didn't increase the tension on the cross strings, so annoying.
Oh! I thought it is made all by machine. Didn't know it is done manually.
Imagine this guy talking you at night with wide open eyes !
I'll be scared.
Mantap
Skips too fast, hard to see the steps clearly.
Super👏
Bro, can a broken shaft be fixed? And will it be useful after fixing it?
Shaft is impossible to repair, I have however, repaired over a hundred racquets with broken frames, some with two breaks, and they play good afterwards!
How does one adjust the tension in the racket to a specific strength?
the machine is set to pull the strings at the specified tension before the stringer inserts the strings through their respective grommets
Very informative.
Amazing👍👍
So in this video, he tensioned the strings one by one (weave and pull, then on to the next).
I saw another person fully weave the mains and crosses first, by hand, and then tensioned just one string at each tie points. 🤔 Which technique is better?
Me wondering the same thing...
I've been string racquet for 8 years, I like to full weave both main and cross with one continuous string, then tension one by one, much easier as the string go through the grommet before there is tension which can be difficult and pron to damage, also there's only two knots, and it holds the tension much better as invariable the there is loss of tension with each knot!
আমার মতো কে কে ব্যাডমিন্টন খেলতে ভালোবাসেন লাইক দিন।
shouldn't you clamp both main strings at once? 1:31
yeees! and 5kg for two central strings.... "-) I work for schoolchildren and amateurs, but I do everything much more carefully. HNYear 2022 !
Yesterday my string was broken where I can get this done ? I am from India 😒😒
Aku memilih diam
Aku takut merusak suasana,jika aku mengatakan apa yang aku rasakan:)
Where will get the badminton stringing mission
sound is super
Super strings man
Hi I am sorry but on the 3:26 where you do the starting knot, you just made the knot on its own string but not even tie on the main string? is that correct ?