We did not use the standard notch trowel in this given project due to the uneven surface finish of the CHB layout. To ensure that the EPS board sticks even on uneven surfaces, we isolate a huge amount of adhesive and apply pressure when installed so that the adhesive behind the board, spreads on its own. We only use notch trowels in cases where the surface of installation is seamless like if the walls are finished with plasterboard and/or poured concrete. We apologize if it is not clear in the video but we did provide back wrap behind the edges on the bottom part of the wall. on the other hand, we did not provide on the upper edge because there was an notion during installation on whether to include the soffit or not. We taped the video before the decision was made to include the soffit. Thank you for your feedback and comments. We appreciate it.
@@angeltsosie2133 We used an improvised foam rasper of Sand paper and Aluminum Channel because it weighs lesser than the basic foam rasper and is much cheaper while providing the same quality of result.
@@angeltsosie2133 We forgot to mention that we have our own formula on the adhesive used for EIFS. Our base coat, at the same time, serves as the waterproofing layer. This enables us to lessen the time of installation and lessen the thickness output of the whole system.
SIGH...Looking for a lil additional knowledge on this for the next stage of my project. Seeing the lack in PPEs and that poor pipe scaffold setup makes me wonder if I'm watching the right video.
ÑHello, I am Chilean and I work in the Eifs system for 10 years in my country and I will travel to the angels in a few days, you will have some contact to make eifs I would thank you very much, the bad thing that I do not handle with English but I am very fast and retailer
Once you've sold out the Adamic-man, his culture and his heritage to Juan, you've sold out to Jamal. ... Matthew 24:38, For in those days before the flood they were eating and drinking, marrying and giving in marriage, until the day when Noah entered the Ark...
Not really that time consuming and eifs will last much longer without needing repairs.. out here in PHX Arizona, majority of buildings out here are eifs
I've seen eifs jobs done 10x as fast by union guys, eifs is used mainly because it can be made into any shape and has some distinctive looks that traditionally come from cement stucco while being cheaper and more energy efficient than cement stucco.
Ya, no shit. Ever heard of a Hawk? Or a durrarasp? Didn't think so. The foam application the way they stuck it to the wall would get the job shut down. It needs a Notch Trowel!! For water drainage. Also the wall is not gold coated or a bonding agent. Time is money and you never want to go back to a old job. So many bad mistakes. Sorry if I offend, but, you need waay more research.
They are applying this to a commercial building. The substrate is concrete, so this seems legit for the type of application. I'm not an expert though so...
Hmm. No notch trowel for adhesive to eps board? No back wrap behind the edges?
Looks like they didn't even aquaflash or weather proof anything either ND wat did they even use to rasp it
We did not use the standard notch trowel in this given project due to the uneven surface finish of the CHB layout. To ensure that the EPS board sticks even on uneven surfaces, we isolate a huge amount of adhesive and apply pressure when installed so that the adhesive behind the board, spreads on its own. We only use notch trowels in cases where the surface of installation is seamless like if the walls are finished with plasterboard and/or poured concrete.
We apologize if it is not clear in the video but we did provide back wrap behind the edges on the bottom part of the wall. on the other hand, we did not provide on the upper edge because there was an notion during installation on whether to include the soffit or not. We taped the video before the decision was made to include the soffit.
Thank you for your feedback and comments. We appreciate it.
@@angeltsosie2133 We used an improvised foam rasper of Sand paper and Aluminum Channel because it weighs lesser than the basic foam rasper and is much cheaper while providing the same quality of result.
@@angeltsosie2133 We forgot to mention that we have our own formula on the adhesive used for EIFS. Our base coat, at the same time, serves as the waterproofing layer. This enables us to lessen the time of installation and lessen the thickness output of the whole system.
Where do I begin?
Anung foam ang gamit nito? Normal styrofoam lang or may ibang materials para dito?
Nicely done.
And we Ned to use the float? Or nat necessarily
SIGH...Looking for a lil additional knowledge on this for the next stage of my project. Seeing the lack in PPEs and that poor pipe scaffold setup makes me wonder if I'm watching the right video.
Me puede decir que materiales nomas se necesita para aser ese tipo de estoco please
Closed cell sprayfoam is best.
Hi... Where to purchase stucco adhesive? And foams
Philippines made base coat power --OPTIMO construction chemical manufacturing corp San Simon Pampanga Philippines
and no moisture barrier hmmm
Así no se hace
What type cement use ?
It's called a base coat. Sto is a popular brand that has it under the name STO BTS.
@@TheLordmewtwo Philippines made base coat power --OPTIMO construction chemical manufacturing corp San Simon Pampanga Philippines
Hello do I have to remove the plastic foil from styrofoam?
no
Yes you do have to remove if you are planning on sticking it with mud
My dad owns this channel. Bc. My name is maria De ketatry his name is Gustavo de ketatry
Le faltan los tornillos
ÑHello, I am Chilean and I work in the Eifs system for 10 years in my country and I will travel to the angels in a few days, you will have some contact to make eifs I would thank you very much, the bad thing that I do not handle with English but I am very fast and retailer
Hiring p b jn
Efics aloows this
Laurent jasmin
you are fired
Omg
Once you've sold out the Adamic-man, his culture and his heritage to Juan, you've sold out to Jamal.
...
Matthew 24:38, For in those days before the flood they were eating and drinking, marrying and giving in marriage, until the day when Noah entered the Ark...
You need any help im a. 3rd gen plaster
I’m a carpenter and just did this work this week it’s fun AF and I am really good at it
this is very time consuming comparing to brick or weatherboard claddings, why people are even doing it.
Not really that time consuming and eifs will last much longer without needing repairs.. out here in PHX Arizona, majority of buildings out here are eifs
@@angeltsosie2133 Also can't beat that EIFS look with some stone, as well as that R-value that comes with the foam ;)
I've seen eifs jobs done 10x as fast by union guys, eifs is used mainly because it can be made into any shape and has some distinctive looks that traditionally come from cement stucco while being cheaper and more energy efficient than cement stucco.
looks better and costs cheaper
Not when it's done correctly...this is not correct...
Not impressed. I do EIFS for a living and this crew wouldn't fly on my job
I agree. Terrible job. I have EIFS on my home and I’ve also seen it done on 2 other homes besides mine and this isn’t how it’s done at all.
Ok, so,please tell us how it should be done correctly….
Ya, no shit. Ever heard of a Hawk? Or a durrarasp? Didn't think so. The foam application the way they stuck it to the wall would get the job shut down. It needs a Notch Trowel!! For water drainage. Also the wall is not gold coated or a bonding agent.
Time is money and you never want to go back to a old job. So many bad mistakes. Sorry if I offend, but, you need waay more research.
They are applying this to a commercial building. The substrate is concrete, so this seems legit for the type of application. I'm not an expert though so...
😂 butchers and very slow