In your first segment for changing the map / dome lights.. You know you can completely bypass having to figure out how to take that dome bulb out with the tape by just pulling the entire unit down from the back. The unit itself is held in place by 4 clips and 1 connection wire to power the bulbs. Great install video :)
I got my LED set recently and easily installed the lights in trunk. This video helped me very much since I was afraid to break the outer cover of the driver and passenger lights. Thank you very much!
Alright so this video was perfect for how you actually install the lights, the step by step guide was easy. So with that said you'd think this would be a quick install like in the video right, atleast for me absolutely not. The bulbs in the light fixtures were the biggest pain of the ass to get out. After they were out it was cake but holy hell were they difficult. Not only did they not come out no matter what trick I did (the tape trick eventually worked after almost a whole roll was used) but I live in Florida so even at 4 AM when I installed these (I work overnights so I'm a night owl) it was 80° outside and by the time the tape got on the bulb all the stick was gone because of the humidity. Other than that the lights are fantastic and look great in my 2020 Charger and I am happy with my purchase.
We're happy you are enjoying your Diode LEDs. We're sorry to hear getting the factory bulbs out was so difficult- they can definitely be a pain! Good job with the install!
I had to as well, using the tape method one bulb did shatter - ended up taking off the whole dome light assembly - just four clips, turned out to be much easier
what about the little light under the steering wheel. do you know the buld size and how to replace? I think there is also one under the glove box? thanks
While doing this, I broke one of the bulbs while it was still in its female adapter for the front map light, cut three fingers papercut style trying to yank down the entire front map light housing to try and install the bulbs a different way (which was much easier), I broke one retention clip for both rear passenger map lights, somehow punctured a small hole in my roof liner just below the left passenger map light which exposes the yellow foam msterial underneath which with my OCD will bother the crap out of me. I simply gave up on the glove compartment bulb; tape did nothing for me. This definitely did not take 10 mins nor was it easy; it was a Bltch to do.
Hey there! Sorry to hear that! Feel free to give a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
what about the other two map lights, you changed two and still there other two not changed. also, is there a LED light for that small overhead light between the map lights? please answer me and thank you
+mn9tube, of the four map lights, two are already LED and two are incandescent. The incandescent bulbs can be upgraded to LED; however, the two bulbs that are already LED can't be upgraded. For the other location you are inquiring about, can you please email a picture of the bulb and the location to contact@diodedynamics.com, and our sales representatives can determine if we have a bulb that will fit!
+Trevor Fitch We would be happy to help! To ensure we help you find the right bulb for that location, please remove the bulb and send a photo to contact@diodedynamics.com.
What about the other 2 map light bulbs? I wanna change those to Blue Led light bulbs please help me how to replace those bulbs on 2017 Chrysler 300 but same exact bulbs at the ones in the video. Please help asap. Thanks
+VIC on ur PC If you are able to access and uninstall the factory bulb and send us a photo to contact@diodedynamics.com, we would be happy to help you find the replacement you'll need!
+Kevin Cooper That bulb can be tricky to remove. How you tried threading a piece of tape behind the bulb? This should give you a better grip so you can more easily pull it out of the housing.
Can you not change the lights in front of the map lights? There's the 2 lights in the ceiling that you push the button for in front of the 2 lights you changed in the cluster by the glasses holder and sunroof controls.
Hi there! Those may be LED from factory. If this is the case, we cannot offer replacements, unfortunately. However, if it is not and you can remove the bulb- shoot us picture and we can let you know what we offer!
@@diodedynamics So the Glove box and Map Lights are the exact same? I am having a hard time finding the map lights on your website for my 2020 Dodge Charger GT.
What about the lower lights in the interior driver seat where the gas and brake pedal is?and passenger seat under the glove compartment wear your feet go? And the other light where the charger adapter is?
How do you change all four map lights that's in front of the rear view mirror the video only showed two and they left the others factory color I'm trying to figure it out in my car
+Devontate C, of the four map lights, two are already LED and two are incandescent. The incandescent bulbs can be upgraded to LED; however, the two bulbs that are already LED can't be upgraded. If you have any other questions, feel free to contact us!
Apparently the map lights have a second light but it looks as though it's a warm white LED. Any chance of making replacement boards for a cooler white? Same with the courtesy light in the side mirrors?
Dang. On another note, any possibility of offering the festoon loop bulbs in the doors and trunk in warm white? I decided to do warm white to match the built in map LED mentioned above but only cool white is offered for the door and truck lights.
+triton302 We don't have any immediate plans to offer our Festoon style LEDs in other white color temperatures at this time. Sorry about that! However, we're always working on new products, so that may be something we offer in the future.
+Rey Latham Unfortunately, we have not had a 2017 Charger into our garage to confirm fitment. However, if you're able to access the factory bulb and send a photo of it to contact@diodedynamics.com, we can help you find a replacement!
Hey there! No, we do not have an interior LED kit available for the Dodge Charger at this time, unfortunately. If you have any other questions, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com!
+Hugo Tejeda Jr. The license plate bulbs for the 2017 Charger are already LED from the factory, so unfortunately, we do not offer a replacement. Sorry about that!
+itzßman For the map lights, we recommend threading a piece of tape behind the bub to get a better grip. For any further instructions, please don't hesitate to contact us!
Hi John! Though we haven't confirmed fitment of our LED bulbs in that particular location, feel free to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team will be happy to see if we offer a compatible solution!
+Harish Baskar Hi there! Unfortunately, we have not confirmed fitment for that location. Sorry about that! However, if you are able to access the factory bulb, uninstall it and send a photo to contact@diodedynamics.com, we can help you out!
+AlOidoR , we are constantly getting new vehicles in to test and create videos with - please subscribe to our UA-cam channel for more updates on future vehicles!
+Jonathan Luna We've got you covered! Here are the bulbs you'll need: -Dome and Map lights: www.diodedynamics.com/store/led-bulbs-1/listed-by-size/44mm-loop.html -Glove Box and Rear Reading lights: www.diodedynamics.com/store/led-bulbs-1/listed-by-size/194.html
hello. Do these leds have issues with having the afterglow effect? I'm getting a charger soon so I wanted to look into an led option without that afterglow. thanks
+SRT Fee Unfortunately we do not have a kit specifically for the Challenger, but you can check out all of our interior bulbs at the link below! www.diodedynamics.com/store/listed-by-vehicle/dodge/challenger.html?application=153
+Quentin Burnett The LED interior kits for the Dodge Charger are all in stock on our website. If you are still having issues, give us a call at 314-205-3033, Monday-Friday 9 am-5 pm CST, and our sales representatives can help you with your order. Click the link below to see what options are available! www.diodedynamics.com/store/led-bulbs/listed-by-vehicle/dodge/charger/2011-2013-dodge-charger-led-kit
+don jose We used our 194 HP5 LEDs in Cool White! Check them out at the link below. www.diodedynamics.com/dome-light-led-for-2011-2017-dodge-charger.html
Hi Nicolas! If you're looking for footwell lighting, we have options for that as well! You can check them out here: www.diodedynamics.com/specialties/led-strips-and-kits/footwell-kits.html
+menray619, we sure do! Below is more information on what countries we ship to. Thanks for your interest! If you have any other questions, feel free to contact us! www.diodedynamics.com/store/shipping-info
+Nick Le, unfortunately, we do not have an install video for the license plate lights. However, if you have any questions about installation, feel free to contact us at 314-205-3033, Monday-Friday 9 am-5 pm CST, or email us at contact@diodedynamics.com and our sales representatives can help you!
+Kyles thurman, unfortunately, we don't install products at our facility, but we have a great network of Authorized Dealers who would be happy to help you with the installation! Below is a link to our Dealer Locator tool, so you can find the dealer nearest you! www.diodedynamics.com/store/index.php/find-dealers/
+anthony mendoza, these LED boards only come in one size for the 2015+ Dodge Charger (link below). They are a perfect fitment for the factory LED boards. If you have any other questions, feel free to contact us! www.diodedynamics.com/store/catalog/product/view/id/22864/s/2015-dodge-charger-multicolor-drl-led-boards/category/1451/
They will be the exact same as the 2015 model - check out our link below! www.diodedynamics.com/by-vehicle.html?find=2015-dodge-charger-314348&sid=hz6ElD2Sr7
Map light removal and installation is much easier if you take the whole assembly off.
Corey Tolliver agreed. You don’t have to worry about using tape. Pop off the housing and twist to remove bulbs.
you can also remove the clear place cover in the rear with a flat head. both front and rear were done the harder way in this video
node 1 BBC’s hah m
In your first segment for changing the map / dome lights.. You know you can completely bypass having to figure out how to take that dome bulb out with the tape by just pulling the entire unit down from the back. The unit itself is held in place by 4 clips and 1 connection wire to power the bulbs.
Great install video :)
+Michael Geist Thanks for the tip!
You're welcome. I learned the hard way -_- lol. I look forward to receiving my bulbs :)
I wish I read that before I spent an hour trying to get those out.
Tip I found. Use a silicone bracelet to grab those halogen bulbs. Super easy on coming out.
I got my LED set recently and easily installed the lights in trunk. This video helped me very much since I was afraid to break the outer cover of the driver and passenger lights. Thank you very much!
Best tutorial on UA-cam. I have a 2012 Chrysler 300 and I already changed the two overhead bulbs, how do you change the map light bulbs?
Aww man this video helped a lot my car looks way better now thank u
+Javier Ramirez, glad you are enjoying your LEDs! Thanks for your support!
Alright so this video was perfect for how you actually install the lights, the step by step guide was easy. So with that said you'd think this would be a quick install like in the video right, atleast for me absolutely not. The bulbs in the light fixtures were the biggest pain of the ass to get out. After they were out it was cake but holy hell were they difficult. Not only did they not come out no matter what trick I did (the tape trick eventually worked after almost a whole roll was used) but I live in Florida so even at 4 AM when I installed these (I work overnights so I'm a night owl) it was 80° outside and by the time the tape got on the bulb all the stick was gone because of the humidity. Other than that the lights are fantastic and look great in my 2020 Charger and I am happy with my purchase.
We're happy you are enjoying your Diode LEDs. We're sorry to hear getting the factory bulbs out was so difficult- they can definitely be a pain! Good job with the install!
Thanks for this video, however I needed to use another method to switch out the dome lights.
I had to as well, using the tape method one bulb did shatter - ended up taking off the whole dome light assembly - just four clips, turned out to be much easier
TOP MARKS MATE 👍🏾👍🏾👍🏾👍🏾👍🏾
How do I get those lights to turn off the come on whenever my headlights are on and that home icon thing blinks yellow how do I turn these off?
Hey there! Would you mind elaborating a little bit more on what you are trying to accomplish?
what about the little light under the steering wheel. do you know the buld size and how to replace? I think there is also one under the glove box? thanks
Did you figure this out? I'm also wondering.
While doing this, I broke one of the bulbs while it was still in its female adapter for the front map light, cut three fingers papercut style trying to yank down the entire front map light housing to try and install the bulbs a different way (which was much easier), I broke one retention clip for both rear passenger map lights, somehow punctured a small hole in my roof liner just below the left passenger map light which exposes the yellow foam msterial underneath which with my OCD will bother the crap out of me. I simply gave up on the glove compartment bulb; tape did nothing for me. This definitely did not take 10 mins nor was it easy; it was a Bltch to do.
Hey there! Sorry to hear that! Feel free to give a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
Yea the tape method is bullshit I haven't seen that work for anybody
i have a 2017 charger sxt..and theres light bulbs lighting up the two front floormats..but i didnt know how to get to them..
what about the other two map lights, you changed two and still there other two not changed. also, is there a LED light for that small overhead light between the map lights? please answer me and thank you
+mn9tube, of the four map lights, two are already LED and two are incandescent. The incandescent bulbs can be upgraded to LED; however, the two bulbs that are already LED can't be upgraded. For the other location you are inquiring about, can you please email a picture of the bulb and the location to contact@diodedynamics.com, and our sales representatives can determine if we have a bulb that will fit!
Do you guys have a different bulb for the floor board bulb. It is a square bulb that is next to your feet on both drivers and passenger side.
+Trevor Fitch We would be happy to help! To ensure we help you find the right bulb for that location, please remove the bulb and send a photo to contact@diodedynamics.com.
I'm wondering, too. Did they help you?
+Arcadias no not really. They don't have one.
What about the other 2 map light bulbs? I wanna change those to Blue Led light bulbs please help me how to replace those bulbs on 2017 Chrysler 300 but same exact bulbs at the ones in the video. Please help asap. Thanks
+J4Gv33r Please email us at contact@diodedynamics.com, and we can help you out!
This is my question as well. Now I have white LED map lights but the stock "yellow" reading lights next to them. That's not going to work...
What about the map lights for 2019?
GUYS THE MAP LIGHTS ARE SO MUCH EASIER WHEN YOU PRY OFF THE WHOLE HOUSING , trust me!
Thank you for the feedback and suggestion!
Yes I learned that the hard way 😓
Anyone else notice the typo on the overhead reading consoles bulb number? They were actually bulb number 194 for me. 2016 Charger Scat Pack.
+Trevor Fitch That is correct; that is a 194 bulb in that location on your Charger.
Great Work
Thank you for the support! 💪💪
What about the second light on the dome lights
+VIC on ur PC If you are able to access and uninstall the factory bulb and send us a photo to contact@diodedynamics.com, we would be happy to help you find the replacement you'll need!
How I'm the world do I get the bulb out it doesn't want to come out its in there pretty hard map lights
+Kevin Cooper That bulb can be tricky to remove. How you tried threading a piece of tape behind the bulb? This should give you a better grip so you can more easily pull it out of the housing.
thanks that did the trick :)
So your answer was in the video, huh? Imagine that.
@@fire398017 😂😂😂 you fucking dick
Can you not change the lights in front of the map lights? There's the 2 lights in the ceiling that you push the button for in front of the 2 lights you changed in the cluster by the glasses holder and sunroof controls.
Hi there! Those may be LED from factory. If this is the case, we cannot offer replacements, unfortunately. However, if it is not and you can remove the bulb- shoot us picture and we can let you know what we offer!
you should make one and show the bulb and style b4 instal
+Omero Magana Next time we have a Charger into our studio, we will be sure to shoot more videos!
Hey do y’all make an led for the door handle lights
Hi there! We don't currently offer an LED upgrade for that location. Sorry about that!
what are the bulb sizes of each spots..?? great video
+miguel garcia In this video, we installed our HP5 Map Light LEDs, SMF2 Vanity Light LEDs, HP5 Glove Box Light LEDs, HP5 Rear Map Light LEDs, SML8 Door Light LEDs, and SML8 Trunk Light LEDs, all in Cool White!
@@diodedynamics So the Glove box and Map Lights are the exact same? I am having a hard time finding the map lights on your website for my 2020 Dodge Charger GT.
@@Schmidty8806 Hey there! It looks like your map lights are LED from factory. Unfortunately, we don't offer LED replacements for them.
What about the lower lights in the interior driver seat where the gas and brake pedal is?and passenger seat under the glove compartment wear your feet go? And the other light where the charger adapter is?
+Erick G Check out our Footwell LED Kits at the link below!
www.diodedynamics.com/store/led-bulbs-1/led-strip-accent-kits/footwell-kits.html
You changed the dome lights but Any replacements for the spotlight/maplight led?
Yes, we do offer other interior bulb replacements. Check them out!
www.diodedynamics.com/by-vehicle.html?find=2015-dodge-charger-314348&sid=yCWnXS2P8j
What's the wheel and tire size on that beauty
Hi there! This was a customer's vehicle so unfortunately, we don't know for sure! Sorry about that!
How do you change all four map lights that's in front of the rear view mirror the video only showed two and they left the others factory color I'm trying to figure it out in my car
+Devontate C, of the four map lights, two are already LED and two are incandescent. The incandescent bulbs can be upgraded to LED; however, the two bulbs that are already LED can't be upgraded. If you have any other questions, feel free to contact us!
+Diode Dynamics alright thanks
I couldn't take the light bulb out. Can anyone help me
Apparently the map lights have a second light but it looks as though it's a warm white LED. Any chance of making replacement boards for a cooler white? Same with the courtesy light in the side mirrors?
+triton302 Unfortunately, if this location is LED from the factory, we will not offer a replacement. Sorry about that!
Dang. On another note, any possibility of offering the festoon loop bulbs in the doors and trunk in warm white? I decided to do warm white to match the built in map LED mentioned above but only cool white is offered for the door and truck lights.
+triton302 We don't have any immediate plans to offer our Festoon style LEDs in other white color temperatures at this time. Sorry about that! However, we're always working on new products, so that may be something we offer in the future.
Are you able to replace the lights behind the door handles on a 2017 Charger? If so, which bulb is it specifically? Thanks
+Rey Latham Unfortunately, we have not had a 2017 Charger into our garage to confirm fitment. However, if you're able to access the factory bulb and send a photo of it to contact@diodedynamics.com, we can help you find a replacement!
Thanks!
There's no kit available for the Chargers? just gotta piece it all together?
Hey there! No, we do not have an interior LED kit available for the Dodge Charger at this time, unfortunately. If you have any other questions, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com!
Do you know how to replace the license plate bulb on a 17 charger rt? Can't find any videos or info on it, and can't get the lamp to open.
+Hugo Tejeda Jr. The license plate bulbs for the 2017 Charger are already LED from the factory, so unfortunately, we do not offer a replacement. Sorry about that!
Diode Dynamics thanks!
how on the map light assembly do you remove / replace the 2 additional lights
+itzßman For the map lights, we recommend threading a piece of tape behind the bub to get a better grip. For any further instructions, please don't hesitate to contact us!
hey do you guys sell fog light kits for 2016 chargers? i don't have any and oems are expensive.
+Jorge Charco Go ahead and shoot us an email at contact@diodedynamics.com and we can help you out with that!
Do they make lights to replace the ones by the pedals and the passengers feet ?
Hi Tim! We don't yet offer an LED upgrade for that particular location. Sorry about that!
What about the OEM front footwell lights? Can they be upgraded?
Hi John! Though we haven't confirmed fitment of our LED bulbs in that particular location, feel free to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team will be happy to see if we offer a compatible solution!
Tape doesn’t work for me i can’t get the bulb out
Please reach out to us at contact@diodedynamics.com, or give us a call at 314-205-3033 M-F CST, and our service team will be happy to help!
Good job, Could you please where can I find this LED bulb in 4:17?
No problem! You can check that bulb out here: www.diodedynamics.com/trunk-light-leds-for-2006-2018-dodge-charger-pair.html
Anybody know where I can buy LED lights to replace the two tiny floorboard bulbs?
+Arcadias Unfortunately, we do not carry a replacement bulb for that location at this time. Sorry about that!
Do you guys sell the lights for the interior door knob housing?
+Harish Baskar Hi there! Unfortunately, we have not confirmed fitment for that location. Sorry about that! However, if you are able to access the factory bulb, uninstall it and send a photo to contact@diodedynamics.com, we can help you out!
do the same tutorial for a Ford Fusion 2015 ! .. :D pls
+AlOidoR , we are constantly getting new vehicles in to test and create videos with - please subscribe to our UA-cam channel for more updates on future vehicles!
i got a 2017 dodge charger rt what bulb will i use for the interior?? can anyone help
+Jonathan Luna We've got you covered! Here are the bulbs you'll need:
-Dome and Map lights: www.diodedynamics.com/store/led-bulbs-1/listed-by-size/44mm-loop.html
-Glove Box and Rear Reading lights: www.diodedynamics.com/store/led-bulbs-1/listed-by-size/194.html
Which white did u use since there are so many options
+alhammam alsindi We used cool white bulbs in this video!
What Lumens did you use?
hello. Do these leds have issues with having the afterglow effect? I'm getting a charger soon so I wanted to look into an led option without that afterglow. thanks
Do you sell a full kit for the 2015 hellcat challenger
+SRT Fee Unfortunately we do not have a kit specifically for the Challenger, but you can check out all of our interior bulbs at the link below!
www.diodedynamics.com/store/listed-by-vehicle/dodge/challenger.html?application=153
I tried to buy the whole kit but it says everything's out of stock.
Me too
Me too
+Quentin Burnett The LED interior kits for the Dodge Charger are all in stock on our website. If you are still having issues, give us a call at 314-205-3033, Monday-Friday 9 am-5 pm CST, and our sales representatives can help you with your order. Click the link below to see what options are available! www.diodedynamics.com/store/led-bulbs/listed-by-vehicle/dodge/charger/2011-2013-dodge-charger-led-kit
What bulbs were used for the back where the headliner handles are?
+don jose We used our 194 HP5 LEDs in Cool White! Check them out at the link below.
www.diodedynamics.com/dome-light-led-for-2011-2017-dodge-charger.html
Would the hp3 work as well for this area along with glove box and dome?
+don jose Yes! All of these locations use a 194 bulb, so our HP3 will be compatible.
What color bulbs are these???
They are 6000K!
Will it fit into my challenger 2016?
+alhammam alsindi Yes, they sure will!
How do you change the footwell lights?
Can’t u can use color film or cover it up with like black tape
3years ago I think u found out by now
What about the floor lights
Hi Nicolas! If you're looking for footwell lighting, we have options for that as well! You can check them out here: www.diodedynamics.com/specialties/led-strips-and-kits/footwell-kits.html
"Should only take 10-15 minutes..."
Me 30 minutes into still trying to pull the map light cover out without breaking it: 😐
Haha same. Did you ever get it?
@@boknows7773 Yeah. I eventually got it. Thanks!
do you ship outside of us??
+menray619, we sure do! Below is more information on what countries we ship to. Thanks for your interest! If you have any other questions, feel free to contact us!
www.diodedynamics.com/store/shipping-info
What about license plate?
+Nick Le, unfortunately, we do not have an install video for the license plate lights. However, if you have any questions about installation, feel free to contact us at 314-205-3033, Monday-Friday 9 am-5 pm CST, or email us at contact@diodedynamics.com and our sales representatives can help you!
+Diode Dynamics even tho u showed how to do it how much would u charge to do if someone didnt feel comfortable with doing it themselves
+Kyles thurman, unfortunately, we don't install products at our facility, but we have a great network of Authorized Dealers who would be happy to help you with the installation! Below is a link to our Dealer Locator tool, so you can find the dealer nearest you!
www.diodedynamics.com/store/index.php/find-dealers/
what size do we need
+anthony mendoza, these LED boards only come in one size for the 2015+ Dodge Charger (link below). They are a perfect fitment for the factory LED boards. If you have any other questions, feel free to contact us!
www.diodedynamics.com/store/catalog/product/view/id/22864/s/2015-dodge-charger-multicolor-drl-led-boards/category/1451/
the fucking bulb wont come out
Try using a piece of tape. Stick half of a cut of tape to the bulb and then stick the other half of the piece together to pull the bulb out.
What about the map lights for 2019?
What about the map lights for 2019?
They will be the exact same as the 2015 model - check out our link below!
www.diodedynamics.com/by-vehicle.html?find=2015-dodge-charger-314348&sid=hz6ElD2Sr7