Install Input Shaft on Eaton Fuller Transmission - I Wish I didn't need to open up the top cover 😢

Поділитися
Вставка
  • Опубліковано 13 жов 2024
  • I am showing you step by step how to install an input shaft on Eaton Fuller Transmission 16909 (9 speed convertible to 13 speed). The top cover is totally rusted out. I was trying to avoid opening up the top cover. However, I ended up opening it.
    How to Remove Input Shaft on Transmission - Step by Step
    ► • How to Remove Input Sh...
    You can get the same input shaft bearing puller tool here: amzn.to/3XMON7m
    📢Exciting News:
    Our online store is officially launched - Shop the largest collection of DPF, DOC, SCR & One Box at a price you will like! Use fan-exclusive promo code: road3333 for 5% off - limited time only!
    ► DPFDiscounter.com
    Business Info:
    Diesel Emissions Specialists offers expert diagnostics and repairs for diesel emissions aftertreatment systems. Rely on our skilled technicians for comprehensive solutions, including DPF cleaning, DOC, SCR, and One Box parts. Ensure your diesel engine runs efficiently with our top-tier services.
    ► www.emissionsp...
    ► Address: 1120 High Ave SW Canton, Ohio 44707
    ► Phone: 330-573-5396 (for business only)
    ► Email: info@emissionspecialists.com
    Shop the largest DPF, DOC, SCR & One Box collection at a price you will like!
    ► dpfdiscounter....
    Get the most advanced electric APU power by Lithium Starting Batteries from Polar Fox Technologies today!
    ► www.polarfoxap...
    Connect with us on Social Media Platforms:
    ► UA-cam: bit.ly/35YO3kN
    ► Instagram: bit.ly/3C7hRy6
    ► TikTok: bit.ly/3QxGHMT
    ► Facebook Page: bit.ly/2QqBuZ0
    ► Threads: bit.ly/3KmNp6P
    ► Trucking Facebook Group: bit.ly/34TbQXQ
    My Favorite Products for trucking & truck repair needs from Amazon:
    ► amzn.to/3xZkDn3
    Awesome Products and Services We Recommend:
    ► OTR performance diagnostic tool (super easy scan tool every trucker needs) - use promo code road3333 to get $100 off: bit.ly/3O3wshT
    ► Rock Rooster offers the best work boots for you. Use channel-exclusive promo code road3333 to get 12% off of your order today. bit.ly/3HFLFDu
    Want to work with our channel? Email us for more details
    truckingandfixingwithryan@gmail.com
    -----Disclaimer-----
    The information and instructions provided by Trucking & Fixing with Ryan UA-cam channel is for general informational purposes only. All information on the channel is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on this channel. Some product links are affiliate links which means if you buy something we'll receive a small commission.

КОМЕНТАРІ • 18

  • @truckingandfixing
    @truckingandfixing  Рік тому +1

    Connect with me on Instagram: ►bit.ly/3C7hRy6 where I will share our shop updates, daily truck repair stories, bite size education clips and giveaways annoucement, etc... See you there!

  • @mattdeckert6150
    @mattdeckert6150 2 місяці тому

    4:00, I've done 1000's of these with an air hammer, VERY lightly feather the trigger with a bit that is ground flat on the end.
    Entire front bearing/input replacement in about 10 min with zero damage.

    • @mattdeckert6150
      @mattdeckert6150 2 місяці тому

      I NEVER take the top covers off to swap input shafts on this style trans.

  • @mgakowski
    @mgakowski Рік тому +2

    Anytime you remove the shift bar housing you need to remove the hi low slave bro. Sometimes that interlock pin doesn't come out with it either, just make sure it's out the way before you refit the cover, then you refit the slave/pin.

  • @banzaii6285
    @banzaii6285 Рік тому +3

    Love the longer repair vids, but....I know you're trying to run a business (not a school), and it's probably a pain to record. Thanks👍.

    • @truckingandfixing
      @truckingandfixing  Рік тому +3

      Thank you! It is more difficult to record the longer videos! But we will make it work!

  • @josevaldez7281
    @josevaldez7281 Рік тому

    That dodge @ 12:30 tho 👌🏽😂

  • @benjanos5580
    @benjanos5580 Місяць тому

    When that happens w the bearing i hold the input shaft and pull out at same time/ then i hit the bearing inner race to drive it in all the way

  • @eddiebartholomew9172
    @eddiebartholomew9172 Рік тому +1

    Never seen someone install input shaft retainer without silicone

  • @rickysons6362
    @rickysons6362 Рік тому

    Just wanted to know if pdi turner worth getting

  • @edwardreyes6867
    @edwardreyes6867 Рік тому

    When the bearing is seated and the input shaft is too far in and the snap ring groove is covered like that, I smack the input shaft with my palms side to side and it’ll work the input shaft and bearing out a bit so I can give the installer tool some more hits. Repeat a couple times and it’ll drive it in properly. Wont have to remove the top cover.

  • @BoostedOnaBudget5
    @BoostedOnaBudget5 Рік тому +1

    I hold and pull the shaft towards me while sending the bearing in with a hammer or mallet till you can see the indentation for the snap ring

    • @Rightchuare
      @Rightchuare Місяць тому

      I do the same thing but only with a rubber mallet

  • @BoostedOnaBudget5
    @BoostedOnaBudget5 Рік тому +2

    Send it with the rubber mallet that top cover did not have to come off!

  • @eddiebartholomew9172
    @eddiebartholomew9172 Рік тому

    Lmao why did you install input shaft you can see the hub for overdrive and main drive gear is rolled to death gonna be jumping out of gear. It’s need to be rebuilt.

  • @xlxyetixlx
    @xlxyetixlx Рік тому

    a cheap needle scaler from the usual scum bags would make quick work of cleaning the dirt and rust off the top cover then just blow it off

    • @banzaii6285
      @banzaii6285 Рік тому +1

      "From the usual scum bags" 😆

  • @BoostedOnaBudget5
    @BoostedOnaBudget5 Рік тому

    That installer wasn't it lol