Key Battery Nemo, Bipper, Fiorino, Relay, Boxer, Ducato

Car Key battey change is easy with our video. This will show you haw to replace the key battery on a Citroen Nemo, Peugeot Bipper, Fiat Fiorino, Citroen Relay, Peugeot Boxer and Fiat Ducato Key
Buy a high quality CR2032 key battery by clicking our Amazon link below
Buy your key battery here amzn.to/2LF0HOB
So today we've got a Peugeot Bipper key, same as on a Nemo and a Fiat Ducato and Fiorino. This is a really common key now. And we're going to change the battery.
So the first thing is that this here is where the battery compartment is. This is an insert into the key, and if you look on that screw there you can see that the screw is pointing to the locked padlock, and you just need to turn it a little bit so that it shows unlocked.
Okay, once you've done that just get your screwdriver, pop it in there. You don't have to force it; it'll come open really easily. Take that out. Pop that out of the way.
So this is your insert. To get the key battery out of the insert, turn it over and you just pop a screwdriver in the back of there. That means that the battery can just be pulled out. The battery is a 2032-really common. Most key batteries are 2032s now. This one's fine, so we're gonna pop it back in. Okay.
And then when you put this back into here, there's just a little trick that you've got to do. You've got a little ridge there. That's there to locate into a groove that is just where my screwdriver's going there. You can't really see it if we put the key there, but it must go under that groove, otherwise it won't shut.
So the thing to do is push that in and then push that hard down so that it goes underneath, and when you're happy that it's there, push this down. You might have to get a screwdriver and give it a bit of a push because they don't always close properly.
Then change that to the lock position. You'll know if it's correct because ... Okay. So that's wrong. That is not down properly, so let's have a look why. It's good that we showed you that-of course, on purpose. Ha-ha. Okay, and that's because ... That end's okay, but this end is not down properly, so I'm just gonna give it a push. There you go. Now give it a twist. And hopefully that is that.
So that's working properly. So that was simply because this end wasn't pushed down far enough. Something was getting in the way there.
So there you go. If it's done right, the key or blade will go back home and then with a three-button Peugeot, Citroën, or Fiat key you are good to go.
Affiliate Disclaimer
Links on this website may lead you to a product or service. They provide an affiliate commission to the owners of this site should you make a purchase. In no way does any affiliate relationship ever factor into a recommendation. Nor does it alter the integrity of the information we provide.
Please note that we have not been given any free products, services, or anything else by these companies in exchange for mentioning them on the site. The only consideration is in the form of affiliate commissions.

[@richardrichard5409]

Both 2006 my FIAT Ducato X244 keys have no internal screw under the key blade.......very odd, any ideas?

[@TheCarKeyMan]

Maybe they are replacement cases that have been glued?

[@n.murtola4640]

If the key has no screw, the logo side cover splits in half and the bottom half can just be pulled off with a bit of force. I have a key like that and just replaced the battery after spending some time figuring out how to reach it.

[@richardrichard5409]

@@TheCarKeyMan 😎

[@GUENDAMOHI]

Please, I have a problem with the key. It works when I am close to the car. Only when I move away a little, it does not work. Note that I changed a new and original battery, but the same problem.
I have peugeot bipper

[@TheCarKeyMan]

Hello, it sounds like the key signal is weak, or there is an issue with the van. Has it always been the same?

[@GUENDAMOHI]

@@TheCarKeyMan
Thank you, I will look for the problem

[@davidhoyle6626]

Very helpful indeed. Thank you very much. My Discovery key fob is now fixed. David Hayle.

[@TheCarKeyMan]

Great stuff David, glad it helped :)

[@kieronconcannon]

Fantastic.thanks

[@TheCarKeyMan]

Thanks for watching :)

[@tasalkhan6017]

How to put chip?

[@TheCarKeyMan]

Hi Tasal, please explain a bit more what the problem is please

[@tasalkhan6017]

@@TheCarKeyMan the car wont start becuase it hasnt been programmed how to programme I have machine xhorse

[@grapejuice666]

I solved the problem, thanks a lot. All the best to you.

[@TheCarKeyMan]

Well done :)

[@shaunrobinson8663]

Thank You. Makes it a lot easier when somebody knows what to do

[@TheCarKeyMan]

You're welcome Shaun, thanks for watching :)

[@Ethankeenan02]

Hi iv hot a citroen nemo but the top button that unlocks it doesn't work but the rest do is there a way to fix it

[@TheCarKeyMan]

Hi Ethan, this is common. It's probably because the small microswitch underneath is loose or damaged. You just need a local Auto Locksmith to re-case it and fix the switch problem. Or, if you are good at fine soldering and DIY, you may be able to do it yourself

[@Ethankeenan02]

@@TheCarKeyMan yh I can hear something small shaking around so mist likely that

[@TheCarKeyMan]

Yes I expect, a local company should be able to fix it

[@crazy1901]

Not the fob on the UA-cam pic description.

[@TheCarKeyMan]

Hello, can you elaborate please?

[@Pat0rchard]

Thanks for taking the effort to make this video...

[@TheCarKeyMan]

You're welcome Pat :)

[@n3clar]

Thanks

[@TheCarKeyMan]

You're welcome, thanks for watching :)

[@gstavrou]

Thank you for that.

[@TheCarKeyMan]

You're very welcome :)

[@tarnowek1]

Thank You !

[@TheCarKeyMan]

You're welcome :)

[@midlander01]

Great, thank you!

[@TheCarKeyMan]

You're welcome Andrew, thanks for watching :)