Lovey swap. Holleys Sniper has 1. Ford style Two Stage Accessory resolution that tracks idle, total open loop air fuel ratio control, four corner idle, and a Holley mech sec style progressive throttle. From 1969 to 1984, the stock 2bbl 253 or later 4bbl dual exhaust XT5 4.2 litres were only two corner idle. Even with the better Bosch Electronic Ignition, they never cold started well, and gad Hot Fuel handling problems. In the US 5.0 Mustang 4V, Ford for 1983 to 1985 used a Pink Wire Dwell reduction ( sometimes Two Stage Acessory Drive) often the Hot Idle Compensator Four Corner idle but Progressive Vac Sec Holley 4180C 4bbl 600 cfm with a Pull Down electric choke. The four parts fixed cold and hot starts. GM USA did conquer the cold and hot starts issue, as it used the complicated 1979-1987 Feedback QJet 4MC, which Holden couldn't use here till the last carbed SV 5000 VK Commodore. With a dual or single plane 4bbl...the Holley 4180C would always cold start well. Holley has done a Great Job.
Great work guys! The little 253 sounds great! Will definitely be interesting to see what it does on the dyno. Not for HP numbers, but the difference the Sniper makes. Keep it up!
Glad to hear the Sniper worked out. Will be doing the same in the near future so I have been waiting to see the outcome. J&G Diffs do a 4 pinion LSD for the Sailsbury. Pretty sure its a Borg Warner 4 pinion (Commodore/Falcon) machined to suit a sailsbury crown wheel and bearings. S.T.C.benit +1 for a hoodie
Can't beat a classic. Doesn't need to be fast, as long as it puts a smile on your face! Also the carby V8's have the best exhaust note 👌 keep up the good work lads
Loving the channel, never thought I'd watch a UA-cam channel like a tv series, keep up the good work. Super jealous about the amazing builds/mods. 20,000 subscribers before 2022 👍
Boys. I bought a radiator flushing gun. It hooks on your compressor and garden hose. You take out the thermostat and Poke the gun up the hose and pulse the trigger and it pushes out all sorts of crap from engine journals and radiator etc. About $100 and well worth it.
I have been toying with efi since sniper came out. Just scared that I hear so many stories of ecu faults and the lack of support in Australia. Might wait for the next model.
Holley Sniper is definitely on the cards. It’s good to see a real application and all the details involved in fitting it an making it work. I reckon it’s spelled “Spezza-gullabidat”.
Hahah cant beat EFI on the old school motors. I have mine set to crank over 6 times when its cold (1st start) so oil pressure builds up. Glad you guys got it going and set where you need it to be!.
Awesome build. I put a T5 in my LX Torana which is one of the best mods I’ve done. After watching this I’m convinced to put a Holley sniper in too now. Love watching your videos lads. Just everyday guys playing with old cars and giving it a crack. I love it. Keep up the good work.
Love it so much 😍 inspired me to daily drive my HJ 253 again 😁 can you please change out the HZ air cleaner stickers for the HQ 253 sticker? It will help me sleep at night😂
Much Resoect. Aussie Street Maching is always about the Right Stuff. I'll bet its now a flat high 15.5 sec Quarter Mike car. The stock wide ratio M20 was such a very badly spaced gearbox..a One Tonner Commerical 202 transmission that only worked well in Power Board Vans and Pickups. The All Aussie M21 that the Brock 5.0s used...it was so much better. But his 1985 to 1986 T5 Borg - Warner swap was what all Holden 253s and 308 or 304's should use if not an auto. The Stock VH 4.2 4bbl twin exhausted Commodes did 16.6s. The GTS or the rare SS 253 2bbl Four door had trouble breaking into the low 17s with the quirky M20 and Banjo axle ratio.
Good trick with the seals is to drill a self tapper screw into the body of the seal and use that to pry from. Makes removal much easier and no damage to the housing.
I cannot wait to get my Sniper on my HQ Sandman Ute with side pipes!!!!!!! I have milled the Edelbrock Performer manifold dual-plane divider down 20mm and will be using a Wilson 1 inch Four hole spacer that I have ordered from Summit Racing. Mine also will control timing along with the CDI system. Also new 214/224@ 050 camshaft, timing chain, HiLift Johnson lifters, waterpump and HV oil pump. Love what you lads did and now serves as a guide for my conversion.
My mate had a green hq ss monaro back in the day.It had a big cam 650 dp holley etc it sounded beautiful and he beat many modified v8s including my 351 clevo xy that did a 13.9 on the quarter.
Display temperatures in Celsius or Fahrenheit on 3.5" TSLCD: Navigate to the Home screen. Select File, then Local Setup, then Local Options. The options are Show Temperatures in °C or Show Temperatures in °F.
Geez,was considering putting a Ls in a Tonner. Currently has no engine. Now am thinking about building up 308 that's in pieces in the shed with a T5 conversion that is missing some expensive bits. (Bellhousing costs twice the box!,still saving.)..... I don't really need to go fast. Just nice to drive and listen to. Efi is a great option. Sheesh.......$3k tho. Great channel lads,look forward to every episode. You've done well. Cheers👍
Going EFI may not be cheap but for the better driving experience I'd say makes it worth it. If you own it long enough it will pay for itself in fuel savings. Full EFI can make an old car drive like a modern car but due to the engine design and poor flowing cylinder heads of old vehicles it won't make all that much more power. Still, that's why engine conversion exist 👍
G'day guys, Great video I've enjoyed all the work done on the HQ over this series. And the best thing is you now have a car that's finished. (For the moment.) ✌🏻 Peace.
Good trick with output seal removal if you don’t have a seal puller is drive a couple of wood screws into it and a claw hammer and you can usually lever the seal out no damage I’d say spelling would be spitzabrilllihaa
Mate! I love it. What a cruiser! And that is from a ford man. Not true really, I love all aussie classic cars including Vals. I hope you can do one of those some day. Now, enjoy it, don't thrash it!
I used a TH700R tailshaft.oil seal in a T56 Tremec 6 speed manual transmission because it was cheaper,it might.fit the T5 Borg Warner 5 speed manual transmission as well if the Ford T5 transmission uses the same slip yoke as the GM automatic TH700R/4L60E & T56 Tremec transmissions !
Awesome mate. Yours is better than my HZ. Love it. Yes the engines aren't fast but they do sound great. The ole 253 and 308s. Im surprised how good the sniper is, compared to the quadra jet.
Love the direction taken with the Q. Have you considered one of those Harrop Truetrac Banjo/Salisbury centres for the rear end? A bit more of that modern stealthy goodness...
Have some questions i hope someone can answer, been told recently that I need to upgrade the crank, pistons ect.. or the efi with destroy the engine. I'm running a 253 with the 4150 efi everything is stock in the engine except for the holley
Hey guys, glad to see you got the old girl running with the sniper. Now I can start on my ute. I'm going the whole hog with ignition, coil, dizzy etc. Where did you get the progressive linkage from?
You need that lower rate ?? 336 ?? Good all rounder ❤ but if haven't got heaps of hp go lower for the drags strip 390/ or 355 ratio I think yours might be 308? Maybe 278 tall diff ratios that's why 336 good all rounder???
Hey guys very impressed with the sniper build I've got a hj gts and thinking of going this way just curious I doubt you'll answer but is this a Bendigo car as I swear I've seen it around and BTW it is extremely tastefully done I also am looking at the t5 conversion ty for the vids ill be going over them very intently anyway great work
Hoodies!!! Yay. In the days of acronyms and abbreviations It has to be named the STC doesn't it?? Or you could go with "spesiale gereedskapskas" which rolls off the tongue easy as....
Was talking to my Son yesterday about putting a 253 in his HQ tonner instead of a six. Now I can show him the end results of going efi as well. Specialty tool cabinet is spelt: Spe#$*^%:?net 😆 My hoodie is perfect for the temps down here at the moment. Might need to get another so I've got a work one and a going out one 😁
Being over 60yo, I love the sniper, wish they were around in my car mad days 🇦🇺👍
I’m not gonna lie, that sounds delicious.
Think my 202 needs some Sniper love.
Getting 1 for my 186 powered hz
Good stuff gents :) Little 253 sounds awesome :)
Man that sounds unreal. Ive orderd my 2 barrel sniper for my red 6 be interesting to see how it goes.
Lovey swap. Holleys Sniper has 1. Ford style Two Stage Accessory resolution that tracks idle, total open loop air fuel ratio control, four corner idle, and a Holley mech sec style progressive throttle. From 1969 to 1984, the stock 2bbl 253 or later 4bbl dual exhaust XT5 4.2 litres were only two corner idle. Even with the better Bosch Electronic Ignition, they never cold started well, and gad Hot Fuel handling problems. In the US 5.0 Mustang 4V, Ford for 1983 to 1985 used a Pink Wire Dwell reduction ( sometimes Two Stage Acessory Drive) often the Hot Idle Compensator Four Corner idle but Progressive Vac Sec Holley 4180C 4bbl 600 cfm with a Pull Down electric choke. The four parts fixed cold and hot starts. GM USA did conquer the cold and hot starts issue, as it used the complicated 1979-1987 Feedback QJet 4MC, which Holden couldn't use here till the last carbed SV 5000 VK Commodore. With a dual or single plane 4bbl...the Holley 4180C would always cold start well. Holley has done a Great Job.
Great work guys! The little 253 sounds great! Will definitely be interesting to see what it does on the dyno. Not for HP numbers, but the difference the Sniper makes. Keep it up!
Glad to hear the Sniper worked out. Will be doing the same in the near future so I have been waiting to see the outcome. J&G Diffs do a 4 pinion LSD for the Sailsbury. Pretty sure its a Borg Warner 4 pinion (Commodore/Falcon) machined to suit a sailsbury crown wheel and bearings. S.T.C.benit +1 for a hoodie
Use the old seal as protection to hit the new one in.
Nice work fella's. Good to see Oz automotive history preserved albeit slightly modernized.
Can't beat a classic. Doesn't need to be fast, as long as it puts a smile on your face! Also the carby V8's have the best exhaust note 👌 keep up the good work lads
Loving the channel, never thought I'd watch a UA-cam channel like a tv series, keep up the good work. Super jealous about the amazing builds/mods. 20,000 subscribers before 2022 👍
Boys. I bought a radiator flushing gun. It hooks on your compressor and garden hose. You take out the thermostat and Poke the gun up the hose and pulse the trigger and it pushes out all sorts of crap from engine journals and radiator etc. About $100 and well worth it.
I know how much you guys love your tools, might’ve been worth having a seal puller handy for the box 😉
I have been toying with efi since sniper came out.
Just scared that I hear so many stories of ecu faults and the lack of support in Australia.
Might wait for the next model.
Holley Sniper is definitely on the cards. It’s good to see a real application and all the details involved in fitting it an making it work.
I reckon it’s spelled “Spezza-gullabidat”.
Hahah cant beat EFI on the old school motors. I have mine set to crank over 6 times when its cold (1st start) so oil pressure builds up. Glad you guys got it going and set where you need it to be!.
Gotta borrow it from "Stu" Speciality Tool Unit.
Enjoyed the outcome, i love that ole HQ, sounds great. Looks trick. Glad you got it sorted.
Nice HQ mate and that exhaust note is grouse for a 253.
That exhaust note sounds amazing what a beast
Yes. Thongslapper for the win.
Awesome series guys, I spend a good 5 min warming my HQ up each time I take it out, this looks the goods!
Great show , always looking forward to the next episode to see what your up too. Thanks for doing something you enjoy and take us along for the ride.
I'm. Ford Boy Myself but I do appreciate when I see a nice Holden
and yours is a nice Holden.
Awesome build. I put a T5 in my LX Torana which is one of the best mods I’ve done. After watching this I’m convinced to put a Holley sniper in too now. Love watching your videos lads. Just everyday guys playing with old cars and giving it a crack. I love it. Keep up the good work.
So good to see an Australian review.
Thanks guys, keep up the good work .
You guys got me sold already with the T5 conversion, now I have to add a Hollie
I cannot believe the note she gives out, awesome sound there guys...
Love it so much 😍 inspired me to daily drive my HJ 253 again 😁 can you please change out the HZ air cleaner stickers for the HQ 253 sticker? It will help me sleep at night😂
26:22 put a TQ 30 ❤❤ cam in it you will love it 😂
Nice work guys apart from the reliability do you think the car would make more power to the wheels ?
Much Resoect. Aussie Street Maching is always about the Right Stuff. I'll bet its now a flat high 15.5 sec Quarter Mike car. The stock wide ratio M20 was such a very badly spaced gearbox..a One Tonner Commerical 202 transmission that only worked well in Power Board Vans and Pickups. The All Aussie M21 that the Brock 5.0s used...it was so much better. But his 1985 to 1986 T5 Borg - Warner swap was what all Holden 253s and 308 or 304's should use if not an auto. The Stock VH 4.2 4bbl twin exhausted Commodes did 16.6s. The GTS or the rare SS 253 2bbl Four door had trouble breaking into the low 17s with the quirky M20 and Banjo axle ratio.
Good trick with the seals is to drill a self tapper screw into the body of the seal and use that to pry from. Makes removal much easier and no damage to the housing.
I cannot wait to get my Sniper on my HQ Sandman Ute with side pipes!!!!!!! I have milled the Edelbrock Performer manifold dual-plane divider down 20mm and will be using a Wilson 1 inch Four hole spacer that I have ordered from Summit Racing. Mine also will control timing along with the CDI system. Also new 214/224@ 050 camshaft, timing chain, HiLift Johnson lifters, waterpump and HV oil pump. Love what you lads did and now serves as a guide for my conversion.
Sounds awesome mate, once they are working, they are a great bit of kit
Sounds like a sniper coming in the Sandman. Great work on the Q
My mate had a green hq ss monaro back in the day.It had a big cam 650 dp holley etc it sounded beautiful and he beat many modified v8s including my 351 clevo xy that did a 13.9 on the quarter.
Display temperatures in Celsius or Fahrenheit on 3.5" TSLCD: Navigate to the Home screen. Select File, then Local Setup, then Local Options. The options are Show Temperatures in °C or Show Temperatures in °F.
Love you guys, here's a comment for the algorithm 🙏
Geez,was considering putting a Ls in a Tonner. Currently has no engine. Now am thinking about building up 308 that's in pieces in the shed with a T5 conversion that is missing some expensive bits. (Bellhousing costs twice the box!,still saving.)..... I don't really need to go fast. Just nice to drive and listen to. Efi is a great option. Sheesh.......$3k tho.
Great channel lads,look forward to every episode. You've done well. Cheers👍
That would be a great combination. The same set up I have in the Sandman and it’s been great
do a 333 conversion,
basically it's a reground crank with either 265 or 350 rods and 327 pistons from memory
omg u guys just saved me 5k and a hole in my boot!👍🔥
Ar5 manual transmission out of a chev Colorado not a bad conversion its a 5 speed or the 350 z cd009 6 speed to you have done it right 👍
Don't forget the take oiling can to prime oil pump through the sender hole after giving it a good rev.
Beautiful HQ
Love this HQ and yes to hoodies!!
Going EFI may not be cheap but for the better driving experience I'd say makes it worth it. If you own it long enough it will pay for itself in fuel savings. Full EFI can make an old car drive like a modern car but due to the engine design and poor flowing cylinder heads of old vehicles it won't make all that much more power.
Still, that's why engine conversion exist 👍
Probably already know but a good step drill is perfect for drilling into thin material where drill bits bite.
Another great vid guys, your builds are real world for chumps likes us!!! Keep up the great work & keep the “spesh” cupboard tidy!
22:00 THIS!!!
G'day guys,
Great video I've enjoyed all the work done on the HQ over this series.
And the best thing is you now have a car that's finished. (For the moment.)
✌🏻 Peace.
very cool boys, see you next week
Hey guys what’s the mufflers you are running and where did you buy your parts please
Good trick with output seal removal if you don’t have a seal puller is drive a couple of wood screws into it and a claw hammer and you can usually lever the seal out no damage
I’d say spelling would be spitzabrilllihaa
Nice work guys ,who’s the Holley guy that sorted a few things out for u
Looks and sounds awesome.
Yes to the hoodies.
No to trying to spell what ever that was
Great work boys!
Mate! I love it. What a cruiser! And that is from a ford man. Not true really, I love all aussie classic cars including Vals. I hope you can do one of those some day. Now, enjoy it, don't thrash it!
I used a TH700R tailshaft.oil seal in a T56 Tremec 6 speed manual transmission because it was cheaper,it might.fit the T5 Borg Warner 5 speed manual transmission as well if the Ford T5 transmission uses the same slip yoke as the GM automatic TH700R/4L60E & T56 Tremec transmissions !
Soooo good to see guys, this has come up fantastic and it has certainly brought it to life!
Hoodies, yes please!
And maybe its spelt spzltugabnt?
Awesome mate. Yours is better than my HZ. Love it. Yes the engines aren't fast but they do sound great. The ole 253 and 308s. Im surprised how good the sniper is, compared to the quadra jet.
Love the direction taken with the Q. Have you considered one of those Harrop Truetrac Banjo/Salisbury centres for the rear end? A bit more of that modern stealthy goodness...
that's sounds awesome I bet it's better sounding in real life just the best in my opinion 😀
Holy shit that little 253 sounds amazing 🔥
Well done boys tho….Still sounds like the classic 253 bird scarer :)
13:20 i think you meant Mastic
What type of cam was used in this guys?
Done 👍 well mate 👌,a really tastefully done quey, love the channel and keep it up mate 👌
The quey sounds mad. Hoodies would be good. Well done boys.
Have some questions i hope someone can answer, been told recently that I need to upgrade the crank, pistons ect.. or the efi with destroy the engine. I'm running a 253 with the 4150 efi everything is stock in the engine except for the holley
Drill hole put in screw add slide hammer boom done
Hey guys, glad to see you got the old girl running with the sniper. Now I can start on my ute. I'm going the whole hog with ignition, coil, dizzy etc. Where did you get the progressive linkage from?
It’s a good upgrade, for the old classic carbureted V8’s.
Shes sounding bloody unreal!
What CFM Sniper did you use guys?
Awesome sound
You need that lower rate ?? 336 ?? Good all rounder ❤ but if haven't got heaps of hp go lower for the drags strip 390/ or 355 ratio I think yours might be 308? Maybe 278 tall diff ratios that's why 336 good all rounder???
Enjoyed the video guys
Do you have any information on the rear sway bar set up you have on the HQ?
Have to agree; the HQ sounds awesome! 😎
When lock down is over mate bring it down to Chevs and run it up on the dyno. Let me know and I can organise.
Hi, what’s the height of your garage roof?
Putting a hoist in my garage at home and lifting the roof.
Are you planning on further tuning of the sniper on the dyno?
Yeah potentially, especially if we decide to go down the path of the sniper running timing control
Great video guys . Car looks awesome 👏🏼
Good job guys, car looks good and sounds awesome
If you delay the secondaries do the rear injectors still pulse?
Hey guys very impressed with the sniper build I've got a hj gts and thinking of going this way just curious I doubt you'll answer but is this a Bendigo car as I swear I've seen it around and BTW it is extremely tastefully done I also am looking at the t5 conversion ty for the vids ill be going over them very intently anyway great work
Is the HQ a true GTS? Love the channel. Winter time in Victoria sucks
Nah it's a mock up, hence the modifications. He said in an earlier video that if it was genuine he would be doing it up stock and keeping it genuine
Kaleb is right on the money mate, just a replica, started live as a standard Kingswood with the current 253 in it and three on the tree manual
Mate how big are boots in an old cars soooo funny sit in there fitting off.
Nice work guys,its sounds sweet👍🏻
By the way you have a brake light out on drivers side.
What speed gear box
Hey boys, just fund the channel after you showed up on the street machine Summernats video. Doing it again, would you do the box or the sniper first?
Hey mate, that’s awesome to hear, I’d say the box first, it makes a huge difference to the car straight away
Hoodies!!! Yay.
In the days of acronyms and abbreviations It has to be named the STC doesn't it??
Or you could go with "spesiale gereedskapskas" which rolls off the tongue easy as....
haha STC, simple yet effective, get in touch with us via our socials mate and we will send you out a sticker pack mate
How much do you want for it?
Yes please to the hoodies!
Drill a screw into the seal and pull
With multi grips, just an idea 💡 lol
Exactly what i want to do to my HZ premier , 308
You know there is a tool to get them seals out makes the job real easy
What diff ratio are you running?
Was talking to my Son yesterday about putting a 253 in his HQ tonner instead of a six. Now I can show him the end results of going efi as well.
Specialty tool cabinet is spelt: Spe#$*^%:?net 😆
My hoodie is perfect for the temps down here at the moment. Might need to get another so I've got a work one and a going out one 😁
Sounds crisp as good job fellas!! “SsniperrhqWherewhere!!!