Nice setup man. Any reason u went with a straight springer and extended crown instead of a bent springer fork, I'm interested in building my first cruiser so any info is great.
Thanks man.. I’m actually in the process of getting bent forks I just haven’t done it yet. But building a lowrider never ends there’s always something to add. Good luck on your build bro
This build looks great! I'm having trouble with my bent fork on my build. I think the head tube is too long so the geometry isn't working properly and I can't connect the spring to the threaded rod. Do you happen to know the measurement of your head tube on the bike frame? Mine is 5.5" tall from top of the bottom bearing to the bottom of the top bearing. I just can't seem to figure it out. Again your build looks great and I'm thinking of going the springer fork route if I can't make the bent fork work.
@adam Saul thanks man, first you need to know the size of your bike mine is a 26 inch so I got a 26 inch bent fork from eBay. So you have to get the same size forks as your bike size.
@@lowridinjr8520 Yeah I ordered the 26". I can force the bolt on that goes thru the spring but it doesn't set flush on the crown like it should. The whole fork needs to come up about .5". I think I'm going to try and trim down the head tube. Thanks for the reply!
It's a good job I have plans for something similar but it's a three wheel Schwinn. Did you do any fabricating or was this just all from bolt-ons from the lowrider bike catalog?
@Mind Blown yeah it gets longer with it on and you can only turn left and right a little bit. And I got a different crank arm set it’s a 4 inch one piece crank.
Do me a favor I can change the bike pedals can't change the bike pedals this thing doesn't f****** speak when I'm talking to him I got I put the slammer on myself the last bike I had over here in Coney Island in Brooklyn that was sitting on the floor $80 a month I like to do everything myself they got to make a mockery out of it maybe you have a video on the maybe something my stuff is I got a Columbia for $50 over here and the Jewish neighborhood now Columbia oh well try to swim but I'll make it work magic just all the f****** parts come from California
You did an amazing job! I’m thinking about doing my wife’s bike similar. Great pictures too.
Love those Dyno frames.
Looks good homie 💯
This is so crazy, love the transformation video! May I know what's the length of the crank you're using / what brand?
Great video, where can I get the same fork set up? Thanks in advance🙏🏼
Can you adjust ride height on any bent blade forks?
Nice setup man. Any reason u went with a straight springer and extended crown instead of a bent springer fork, I'm interested in building my first cruiser so any info is great.
Thanks man.. I’m actually in the process of getting bent forks I just haven’t done it yet. But building a lowrider never ends there’s always something to add. Good luck on your build bro
@@lowridinjr8520 thanks man. Will definitely keep following ur journey with the bike.
What is the info on the springer fork you used. All the parts decisions you made are freaken perfect
@Richard Varela thank you 🙏, I have a 26 inch classic fork with a extended crown to have it that lowered look
Where can I buy those lowered bent forks? I have a Norco Santiago Cruiser that I want to turn into something similar to your build. Amazing job!
You can get them off eBay.. Thanks
Build is all done now. Thank you!
This build looks great! I'm having trouble with my bent fork on my build. I think the head tube is too long so the geometry isn't working properly and I can't connect the spring to the threaded rod. Do you happen to know the measurement of your head tube on the bike frame? Mine is 5.5" tall from top of the bottom bearing to the bottom of the top bearing. I just can't seem to figure it out. Again your build looks great and I'm thinking of going the springer fork route if I can't make the bent fork work.
@adam Saul thanks man, first you need to know the size of your bike mine is a 26 inch so I got a 26 inch bent fork from eBay. So you have to get the same size forks as your bike size.
@@lowridinjr8520 Yeah I ordered the 26". I can force the bolt on that goes thru the spring but it doesn't set flush on the crown like it should. The whole fork needs to come up about .5". I think I'm going to try and trim down the head tube. Thanks for the reply!
@adam Saul no problem, good luck it’s all a process
It's a good job I have plans for something similar but it's a three wheel Schwinn.
Did you do any fabricating or was this just all from bolt-ons from the lowrider bike catalog?
Thanks man. It’s all just bolt on from lowrider websites
@@lowridinjr8520 what site?
@Norm I get it from eBay
With the extended crown, are you able to ride? And what size is the crank arm?
Yes you can still ride but you can barely turn left to right. And the crank is a size 5 one piece crank
the music smh
😂
What size are your fenders? Awesome build.
Thanks. There 26
Are you able to turn any beach cruiser into a lowrider bike?
Yes anything is possible
Yo how did you make for spring fork instead of being straight it’s like stretched
@ Mind Blown I have part call a extended crown that you change out on your fork to stretch it
@@lowridinjr8520 is the bike long with it on? and is it easy to ride with it ?
@@lowridinjr8520 how short are your peddles are they smaller then usuals?
@Mind Blown yeah it gets longer with it on and you can only turn left and right a little bit. And I got a different crank arm set it’s a 4 inch one piece crank.
What’s the size on the handlebars?
22 inch
What brand bike is it
It’s called a Dyno
Is the bike 26 inches ?
Yeah 26 inch
@@lowridinjr8520 Ight its cuz im trying to make my own Lowrider just tryna know the frame I need homie your bike is nice 💯
Thanks bro appreciate
Sorry, but the music takes away any street cred you had
@whiskey rebel chill It ain’t that serious
Do me a favor I can change the bike pedals can't change the bike pedals this thing doesn't f****** speak when I'm talking to him I got I put the slammer on myself the last bike I had over here in Coney Island in Brooklyn that was sitting on the floor $80 a month I like to do everything myself they got to make a mockery out of it maybe you have a video on the maybe something my stuff is I got a Columbia for $50 over here and the Jewish neighborhood now Columbia oh well try to swim but I'll make it work magic just all the f****** parts come from California