I’m writing this comment with admiration. It seems that you’re Vietnamese, right? Here I am, a Vietnamese. I also have love on cubs. And, I have one already. But now I’m confusing about what I need to do with my cub. I’m inspiring by your chanel and hoping that if you can help me in restoring my baby. It would be an honor if you accept to take a look. Thank you for reading this comment. Also, this is a great video!
¡Heeeee Avemaria caballeros....!Ustedes son unos maestros de la reparación y la restauración de maquinaria y salvo muchísimos detallitos que honestamente debieran corregir, su trabajo sería perfecto....Los felicito.///. Colombia/13/septiembre/2020.
fun to watch!! good video, maybe at some point getting a voice-over to explain your story, who you are, and the major steps and little tips. but hey, I'm not griping, I enjoy seeing stuff get done.
Nice!!!!😁 That was a great video! Just goes to show yeah anything is possible! The only thing I could tell that was off is, after all said and done, the idle of the motor was a little high..... that could be because it’s a new rebuilt motor though. And I can tell these guys, ( and one girl) are from the Philippines 🇵🇭! Nice job👍
Подшипники ставятся на горячую, и в руль не просто шарики насыпаются, шарики должны быть в обойме, это в первые 100 километров высыпется куда то или они как то поменяют свое место и прощай руль, привет столб
Honda c50 deluxe 1972 ra đời năm 72 đến năm 1979 thì xe Campuchia mới qua Việt Nam i hope you reply by Vietnamese . I know you are Vietnamese. Trả lời bằng tiếng việt dùm mình đừng giả ngu mình không biết tiếng Anh 😤
i think its strange to do this effort to get the bling out of an old cub and dont replace the parralell tube on the rear swing arm its there for stability and saftey you just leave it as is and paint it over its preatty banged up my oppinion
I don't think this is a genuine restoration, the speedo at the end is not the same as the one at the beginning, for one - sure they could have changed it, but I don't think so.
I have my doubts about this 'restoration'; I have seen others that are clearly not restorations, in one they took a good cassette deck and trashed it - reverse filming.
Hey dude.... You can trick a lot of people but not all of them... it's not a 40 years old restoration. That rust is only about 6 months next to the sea
Where are you from?
From VN
Tennessee
Australia here ..... subscribe to my channel 🤗
Norway
Greece!
Amazed by how you can keep track of where all those little parts go. This is my favorite color one yet.
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
สวัสดี ครับ 🎄😍😍😍
Prachtig werk mijn complimenten. Willie.W Holland
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
K làm thì thôi,da lam thì lam cho tới, làm xe đẹp hết, nhìn cái giò đạp,cái pô xe hết cảm tình
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Rất hay, rất bổ ích, ít kênh ở vn có thể làm được những video như thế này. Chúc các bạn luôn gặp nhiều may mắn và thành công hơn trong sự nghiệp.
My deep admiration at restoring a rust bucket that most would walk away from. I loved the video and the results were fantastic. Bravo!
Thanks for your feedback. Hope you will continue to support us in the next videos.
I love the color and the paint job. Great work.
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Excelente trabajo hacen los felicito !!!!
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Realy excelent to watch . Beautifull end 😊😊
مشالله شغل تمام انا امتلك مثل هذه الدراجه 90cc
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
You guy's sure know what you're doing, BRILLIANT..!! John from West Australia.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
I do hope you earn what it is worth putting these old junkers back to life. Beautifully done.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Very good restoration.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
I'm from the Netherlands and really appreciate your work. This is what I consider to be adding value while reusing raw materials. Thanks.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
WOW! Awesome job!
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Mantul le motor u
You are geniuses, it's incredible !
Mantap..kreative inopativ..pnuh kreasi..
Thanks for your feedback. I hope you will support us in the next video
Super workmanship, very skillful restoration.
thanks so much
How did it coast?
Only thing left to do, is apply NEW stickers (decals) cub 50 etc. John from West Australia.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Just amazing
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
YOU ARE A SUPER GENIUS AND
MASTER OF RESTORATION
🎖 FOR YOU
Thank you for your feedback. Hope you will continue to support us in the next videos.
Amazing what you guys can do. I look at that bike and I wouldn't even know where to begin!
thanks so much
진짜 제대로 하는 것 같네!
훌륭하다! Good 👍 혼다가 좋긴 좋다!!
Thanks for your feedback. Hope you will continue to support us in the next videos.
I like your dog.
I’m writing this comment with admiration. It seems that you’re Vietnamese, right? Here I am, a Vietnamese. I also have love on cubs. And, I have one already. But now I’m confusing about what I need to do with my cub. I’m inspiring by your chanel and hoping that if you can help me in restoring my baby. It would be an honor if you accept to take a look. Thank you for reading this comment. Also, this is a great video!
Bạn có thể liên hệ với chúng tôi ở fanpage : facebook.com/metalrestoration.yt
cảm ơn bạn đã quan tâm
Mantul lah
Thanks for your feedback. Hope you will continue to support us in the next videos.
Good job
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Bravo. very nice and beautiful work.
thanks so much
Keren abis
thanks
Well done.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Habt ihr gut gemacht, alle achtung tolle Arbeit.
Thanks for your feedback. Hope you will continue to support us in the next videos.
Fantastic job
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
ufff you are my heroes! unos reduros uds - super
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Que paciencia quedó de primera
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Good job sir 👍👍💞🇵🇰
splendide vrery magnifique!
Thanks for your feedback. I hope you will support us in the next video
Also the chain is TOO lose..!! John from West Australia.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
What you accomplished looked to be an impossible task. Very nice!! I'm impressed.
Thanks for your feedback. I hope you will support us in the next video
I agree with a comment by another viewer who said, it's idling too fast..?? John from West Australia.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Excellent restoration. Regards from England
Thanks for your feedback. Hope you will continue to support us in the next videos.
Mind-blowing..😱😱😱
Thanks for your feedback. Hope you will continue to support us in the next videos.
Of course it will run after 40 years, I just want to see the restore 😄
Great video fantastic job stay safe 🇬🇧👍🏻
Thanks for your feedback. Hope you will continue to support us in the next videos.
33 phút để coi 1 video đáng đồng tiền
thanks
Hermosa Restauración, esa moto es mi favorita, suban más vídeos.
thanks so much
This video amazing
thanks so much
Your welcome looking forward for more
Kerennnnn 👍👍👍
Thanks for your feedback. Hope you will continue to support us in the next videos.
جيد جدا
Thanks for your feedback. Hope you will continue to support us in the next videos.
@@RescueRestoration Thank you very much, you are wonderful, I am an Iraqi from the State of Iraq
that is legend motor cycle. very nice job. good lucky to you..
¡Heeeee Avemaria caballeros....!Ustedes son unos maestros de la reparación y la restauración de maquinaria y salvo muchísimos detallitos que honestamente debieran corregir, su trabajo sería perfecto....Los felicito.///. Colombia/13/septiembre/2020.
thanks bro so much
great job well done
thanks so much
Luar biasa
thanks so much
Ngày xưa xe cúp 79 này hàng nhập từ nhật bản về khoảng mấy cây vàng . Nếu tính theo vàng thì mua được chiếc sh thời nay vẫn còn thừa tiền đó
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Qua tuyet ban ban cho minh chiec duoc kg
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Ban co the ghi tieng viet khong
Great job looks good
thanks so much
fun to watch!!
good video, maybe at some point getting a voice-over to explain your story, who you are, and the major steps and little tips.
but hey, I'm not griping, I enjoy seeing stuff get done.
thanks bro so much
Nể thật sự anh ưi
Thanks for your feedback. I hope you will support us in the next video
🎥 👍
thanks
Молодцы!
Thanks for your feedback. Hope you will continue to support us in the next videos.
@@RescueRestoration конечно! Я восхищаюсь Вашей работой. Хочу себе купить такую хонду , только новую , но не получается пока. Жду новых видео👍
А откуда Вы?
I love these kinds of videos. Now I want one haha. Are they gas guzzlers?
thanks so much
Very interesting. Great job. I have a 1981 Honda ct 110 trail bike i would like to restore.
Thanks for your feedback. I hope you will support us in the next video
Wow you are great 😌
Thanks for your feedback. Hope you will continue to support us in the next videos.
v.nice
thanks bro so much
bravo ;super !
Thank you for your feedback. Hope you will continue to support us in the next videos.
nice
Thanks for your feedback. I hope you will support us in the next video
nhìn biết ngay là việt nam....
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Nice!!!!😁 That was a great video! Just goes to show yeah anything is possible! The only thing I could tell that was off is, after all said and done, the idle of the motor was a little high..... that could be because it’s a new rebuilt motor though. And I can tell these guys, ( and one girl) are from the Philippines 🇵🇭! Nice job👍
Thanks for your feedback. Hope you will continue to support us in the next videos.
Amazing restoration 👍🙏
thanks so much
Mantapppp
thanks so much
A esa moto le falta la pieza plástica que va en la parte delantera, pero donde se puede conseguir?
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
two strocks never die
thanks bro so much
1979 feels like a lifetime ago and like last week at the same time.
Thanks for your feedback. I hope you will support us in the next video
tăng nhanh tốc độ một chút sẽ hay hơn
Thanks for your feedback. Hope you will continue to support us in the next videos.
Add some chrome on the machine...👍👍👍
Thanks for your feedback. I hope you will support us in the next video
Anh ơi. Anh ở đâu vậy. Có nhận tân trang xe không anh. Em có con cub đang muốn làm lại như vậy
Thanks for your feedback. I hope you will support us in the next video
Very good job driver's peg needs change its bent
thanks so much
all great but why didnt polish the silencer
thanks so much
Hi, How many days will you finish?
Amazing spider solitaire
thanks so much
I got a speeding ticket in NewPort during the Americas Cup on this thing
Nicee ..
thanks so much
Подшипники ставятся на горячую, и в руль не просто шарики насыпаются, шарики должны быть в обойме, это в первые 100 километров высыпется куда то или они как то поменяют свое место и прощай руль, привет столб
Thanks for your feedback. I hope you will support us in the next video
Honda c50 deluxe 1972 ra đời năm 72 đến năm 1979 thì xe Campuchia mới qua Việt Nam i hope you reply by Vietnamese . I know you are Vietnamese. Trả lời bằng tiếng việt dùm mình đừng giả ngu mình không biết tiếng Anh 😤
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
i think its strange to do this effort to get the bling out of an old cub and dont replace the parralell tube on the rear swing arm its there for stability and saftey you just leave it as is and paint it over its preatty banged up my oppinion
Thanks for your feedback. I hope you will support us in the next video
MADE IN JAPAN BEST IN WORLD.
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
It appeared that you used the old cylinder, with a new piston & rings. to what "oversize" did you need to bore/hone the cylinder to clean up?
thanks so much
I don't think this is a genuine restoration, the speedo at the end is not the same as the one at the beginning, for one - sure they could have changed it, but I don't think so.
👍
thanks so much
Ban ở đâu to nhỏ ban làm xe voi
Thanks for your respond. Hope you will support us in the next videos!
daklak 47
BRASILLL
thanks
@@RescueRestoration ?
Alamatnya dimana
😁😁😁😁😁👍
thanks bro so much
cho số dt để liên hệ làm xe đi bác?
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
❤️
Tks bro :))
👋👋👋👋💖💖💕💕👍👍👍👍
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
I doubt that's the same valve head, cylinder and piston...
thanks so much
I have my doubts about this 'restoration'; I have seen others that are clearly not restorations, in one they took a good cassette deck and trashed it - reverse filming.
Hey dude.... You can trick a lot of people but not all of them... it's not a 40 years old restoration.
That rust is only about 6 months next to the sea
thanks so much
Yup, a lot of these 'bait' videos about; there is no way all that crap could have got into those works - even if you left it in the middle of a field.
Are you guys brothers?
Thanks for your feedback. I hope you will support us in the next video
Блин Всё это хорошо конечно, ну зачем здесь музыка, музыки не надо !
Thanks for your feedback. I hope you will support us in the next video