great video as always. two quick questions what size is the socket to open the filler cap. mine is hand tight at the moment but i want to just nip it up seems larger than an inch hex bit so i'll need to order one. also is the hydraulic filter supposed to be attached to the nut you removed in this video mine didn't come out with the nut and i just took it out by hand but looks like it was attached at some point. many thanks
Good day from Ont. Canada Boy yrs. ago Nuffield was very popular in 1 little town over here. $4500. would buy a 10/60 back in 1966. Do you still make videos. My bro bought 10/60 at auction, but rear engine seal was leaking badly. Sold it again.. Thanks
Hi any tips on how to bleed the clutch lines on leyland 272 🤔I have rebuilt the master cylinder and put new lines and resivoir, when I bleed it I’m only getting a little bit of pressure on peddle which is towards bottom peddle is only a little bit up from bottom , when I lift it up it falls down 2/3 way down . How do I prime it up ?? Any help much appreciated... thanks
Hi, any ideas on how to attach the Retaining nut onto the Bevvelled shaft which is part of the top linkage on a Leyland 384? the nuts come out and I got a new one but when I try to screw it on the shaft keeps turning! Any help would be great, thanks heaps from New Zealand
great video as always. two quick questions what size is the socket to open the filler cap. mine is hand tight at the moment but i want to just nip it up seems larger than an inch hex bit so i'll need to order one. also is the hydraulic filter supposed to be attached to the nut you removed in this video mine didn't come out with the nut and i just took it out by hand but looks like it was attached at some point. many thanks
Good day from Ont. Canada Boy yrs. ago Nuffield was very popular in 1 little town over here. $4500. would buy a 10/60 back in 1966. Do you still make videos. My bro bought 10/60 at auction, but rear engine seal was leaking badly. Sold it again.. Thanks
Hi any tips on how to bleed the clutch lines on leyland 272 🤔I have rebuilt the master cylinder and put new lines and resivoir, when I bleed it I’m only getting a little bit of pressure on peddle which is towards bottom peddle is only a little bit up from bottom , when I lift it up it falls down 2/3 way down . How do I prime it up ??
Any help much appreciated... thanks
Hello,this weekend im going to give my leyland 272 syncro and leyland 253 a full service and tips or any useful this 2 know
Hi, any ideas on how to attach the Retaining nut onto the Bevvelled shaft which is part of the top linkage on a Leyland 384? the nuts come out and I got a new one but when I try to screw it on the shaft keeps turning! Any help would be great, thanks heaps from New Zealand
Not sure but I think far end of shaft has flats on to grip it by. I think you fit the nut and split pin before the assembly is fitted to the tractor.
Brillant
What size spanner do I need for the brass nut for the filter
If you have the steel nut in the centre then the large brass nut is 1 1/2” but you must use a 6 sided socket as a spanner will round off the brass.
What size are the bolts for the filter?
Bolt holding filter to the head is 9/16"
Can I pick your brains on messenger?
@@firmbutton6485 yes fb messinger is easier than youtube messinger