2006-2013 Mini Cooper S Wheel Bearing Hub Assembly Replacement (How To)
Вставка
- Опубліковано 30 лис 2022
- This 2008 Mini Cooper is getting both front wheel bearing assemblies replaced. If you need to replace the wheel bearing and hub assembly on your Cooper this is the right video.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoffee.com/ValleyMo...
🛒PARTS LIST:
▪️ Wheel bearing hub assembly: amzn.to/49Ci2zJ
🛒TOOLS NEEDED:
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Impact wrench: amzn.to/3Sfmiht
▪️ Axle nut (32mm): amzn.to/3VCGZ6W
▪️ Impact driver: amzn.to/3FhU5kR
▪️ Torx bit: amzn.to/3HjeLuj
▪️ Torx bit set: amzn.to/4b5WUTQ
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk. - Авто та транспорт
Excellent video, tight and concise, no extra talk just good business, without an irritating music track. My pick for excellent tutorial with thoughtful tips for successful outcome.
Shake the locktite in the bottle. Clean the rust off the bolt first. There is no need to drive the LT in the threads. Good use of fluid film although applying to the rotor there is no chance it will get in the bolt holes. Good video!
Great video, thanks from Liverpool ( R50 owner)
I have found those machine bolts that hold the rotor in place come off nicely with a hammer style impact driver. And I always put the anti-seize on afterwards.
Great video, thanks very much.
How much tourque did you use for the 4 screws for the wheel bearing?
41ftlbs Friend
What impact drill are you using , been having a nightmare with the wife 06 mini at the moment , first the break disk retaining screw needed drilling out , I wanted better access to the ABS sensor that is faulty well the top of the sensor snapped off , I tried the put a screw in the sensor but it's in there so tight the screw snapped. So I now got to take the hub and bearing off so I can either push it though or drill it out , But I am not doing it until I got a impact driver it just seems to make life so much easier. I don't want to waste money and by the wrong tool are you using a compact impact driver ? P.s great video I was a broken man earlier after that screw snapped , however the removal off the hub seem straight forward enough providing the bolts are not sized in place ,I done tricker stuff in the past. Your video was very well done with clear instructions 👍
Ah man! I feel your pain.
I'm using the Ryobi P262 4 mode 1/2" impact. It's plenty powerful enough for automotive work and super durable. They have a lot of other battery power tools I use regularly like a light, vacuum, air compressor... Not trying to sell you on it but I like them 👍
@@ValleyMobileAutomotive Thank you so much for the quick response