Revolutionary Waste Oil Burner: A Free Energy Solution
Вставка
- Опубліковано 12 гру 2023
- Revolutionary Waste Oil Burner: A Renewable Energy Solution
The title is a bit much but I figured to grab your attention. Now that the cold weather is once again settling in it is that time of year when I start working on different ways to heat the shop without breaking the bank. In this video we are building a waste oil burner that gives off no smoke and actually burns very clean. Did I also mention that it is free heat?
Tools from the forge can be found here:
tradesmanoffgrid.com
Tip Jar:
www.paypal.com/cgi-bin/webscr...
If you would like to support the channel you can also do so through our Patreon link:
/ thetradesmanchannel - Навчання та стиль
You're the man when it comes to heating systems. I saw the pile of chisels or something, so I know what you have been doing and respect your journey.
It's been very busy. I really need to get camera time in but it has been nuts.
yes@@TheTradesmanChannel
Dude I really appreciate your videos. I have had the honour of seeing a few of your videos so informative so very useful and bringing up things that most people don't put together in combination that really needs to be put together like you do. And you are just 100% family and home.... Merry Christmas to you sir and yours and a very Happy New Year.....
Thank you sir. I do the best I can... for the most part.
Good to see you Jim. Merry Christmas!!!
Hello Jeff. Merry Christmas buddy.
It's good to see you out in the shop again Jim. The oil burner looks good. Hope you and your family has a very merry Xmas season and a phenomenal new year.!! Dan.
Nicely done!! I look forward to the next one.
Thank you Lee.
Thanks, Jim, for sharing this video
Thank you for taking the time to watch it.
Nice job Jim, good to see you back! Graham
Hello Graham
Glad to see you are still topside
Still here. I'll give you a shout soon.
i was just wondering about you this morning. Good to see you're still getting it done. Have a blessed Christmas!
Hey buddy. It's been a very strange Fall.
Well come back Jim! Missed your videos, hope to see more soon! Have a good one my friend!
You have a good one yourself buddy
Hi Prof Great to see you. I hope the family and yourself have a Merry Christmas and a Happy , safe and prosperous New Year
Same to you Doug.
Yeah, it’s been a long while? Glad you’re back. Have a safe and wonderful Christmas.
I started to type a reply and got side tracked. You have a great Christmas buddy.
Nice! Definitely going to build one of these! Good to see you bud!
Merry Christmas and a happy new year to you and family!
Sama to you Mike
Very interesting Jim, good to see you again. Have a great Xmas.
Merry Christmas Rick
Good to see you posting again, I tried to call you a few times when I was up your way.
I'll give you a shout. It's been a bas fall this year, I'll explain.
Welcome back Jim I missed your videos. This looks like it will work well. 😊Hope to see more videos.💚💜⚒🛠🤠
I'm going to do a tutorial now that I know it works. Hope you're doing well.
@@TheTradesmanChannel doing well thank you for checking
nice
Hey buddy
I love it when I find a new channel that looks like it will be a good one. Oh wait! Jim, is that you? 😅
Good video. I hope you and the family are doing well.
I know, this guy has been slacking hard.
AAAAAHHHHHGGGGG!!!!!!! Oh, the horror!!!! Do you know how much CO2 you are adding to our already over polluted planet with that waste oil burner. My, my, Jim, you are not being very green. hehe...That's a great build! You've got the touch when it comes to cutting and welding metal, all I've got is the touch to cut and nail wood boards. Hope you and your family are doing great and may the upcoming holiday season be a wealth of blessings to you all! Thanks for letting us take a peek inside of your barn. It's been a wonderful project to watch and it certainly has come a long way.. Stay safe and God Bless.
Very nice to hear from you. This was a fun build, quick too... not a common thing around here.
Good to see you again Jim hope the family is doing well take care 🇦🇺🇦🇺🇦🇺
Good to hear from you Alex. We are all doing well.
That's really cool. Nothing fancy. A good use for waste oil. Maybe a new blower would be quieter.
I'm ordering a better blower. This thing is way too loud.
Jim, i would like to see the construction dimensions of this heater. Additionally, what is the size of the space you are heating, and is it insulated? Any performance specs would be appreciated.
I hope you are doing well Jim. Haven't seen you out there in a while. Hope you and your family are doing well. Dan.
Doing well, just busy as always.
Glad to hear that Jim. Take care.!! Dan
Hi Jim buddy, There you are! It seemed as if it had been a couple of months since we've seen you! I thought I would check my subscription list to see if UA-cam unsubscribed me. Or maybe you got run over by a cow. Good to see you again! Merry Christmas to the family. Mary, Wyatt and the girls. As always, God bless and take care from your very long-time California subscriber. BTW I've got 2 more day shifts left at the power plant next week then I'm retired!! No more working holidays woo hoo!!🎉
I'm guessing I started watching you about 7 years ago.
Congrats buddy! As for my absence, my uncle that raised me is in pretty bad shape so my fall has been pretty well taken up with that.
@@TheTradesmanChannel Sorry to hear that about your uncle. You are a good man looking out for him.
Alcoholism is a nasty business. He just turned 60 and he won't see 61. Very sad.
@@TheTradesmanChannel I was very close with somebody who had that situation makes you feel ill. I will pray for your strength to deal with situation 🙏
I've made one of these as well. Credit for this design goes to "Creative inventions LMTN" and I don't know for sure if he came up with the design or he borrowed it from somewhere. There is a bit of a shutdown time, but yes they do work very nicely and make nice clean heat.
I'm amazed at how clean this burns.
Question...could having a brake disk with a plate welded to the bottom to drip the oil into, then have the 90 degree bend directly down the middle blowing straight into the disk cause it to burn better...might be easier to light too...heat the disk rather than the whole outer shell, once the fire is going, the disk will glow red hot instantly vaporizing and burning the oil, and the air inlet blowing directly down into the disk will cause the heat to radiate out towards the shell and heat the disk in the bottom burning the carbon/sludge that might build up using waste oil
Very cool design!
Good to see ya, I thought you retired from UA-cam, with your millions.
Yeah, millions... now that would be something. Been taking care of my uncle that raised me most of the fall, it's been a crazy couple of months.
Yeah, millions... now that would be something. Been taking care of my uncle that raised me most of the fall, it's been a crazy couple of months.
'Been a while mate!
Just checking everything is OK at Tradesman Towers ;o)
Doing well Dave. The job has kept me running fay and night. I'm working on a video right now, figured you guys could watch me tear my truck apart.
@@TheTradesmanChannel "The job ...." Yeah!
I'm on pre-retirement holiday followed by pre-retirement leave until Sept! (7 weeks as a freebie for giving them a years notice) and it will have been 47 years for the same employer. A bit of a rarity nowadays .... and a bit of luck thrown in!
I'm in holiday mode for a few weeks then the Mrs has told me to get an allotment ;o)
Where you located
How much would you charge to build one?
Greta Thunberg approved !!!! Good to see you again Jim.
Hey buddy. You guys get snowed upon last night?
@@TheTradesmanChannel about 6 inches, nothing crazy. It's been pretty mild so far this winter. How is it down your way?
@exroyalcanadian very mild and I'm not complaining
Does the type of oil matter? Synthetic vs Dino, also would tractor hydraulic fluid work?
Any oil should work. I've tried hydraulic, veg and waste oil. All of them have worked so far. Veg oil worked the best.
You do realize that both synthetic and regular oil made from the same base oil, right? The only difference is that the synthetic is chemically modified to better fit for certain applications (like cold for example).
@@janosszabo98 I did not, thanks for the info!
'Ow do mate!
Swapping crispy for toasty? ........ or has the white stuff not come your way yet?
Looks like you have a great setup there ...... not so much here. No waste oil and we can't burn it without a license (£1,800 last time I checked a couple of years ago).
You seem to have gone down a different route than many on this. No fine oil regulator with cut away to see the "pencil thick flow of oil", no heavy metal plate over the burning tray, no fancy vortex.
Got to say it seems to work well for all that ..... maybe you will set a trend? Blue flame = good burn and no smoke!
I find that simple is better, much better, on most things. I work on enough over engineered junk to want it at home.
@@TheTradesmanChannel K.I.S.S. .... a way of life!
Can you build me one
Hey, comment much, but post a short so we know your ok. Miss the content.
Hey buddy. I'm missing making the content. My job took a turn for busy this year with a promotion. I'm hoping to be running the camera soon.
Nice! Dude just invented renewable fossil fuels!👌🏻😂
No more environmental damage in regards to Oil drilling🤩
Just kidding mates all that shit including plastics and waste oil get lit the fuck up anyways.
Nice work Broski!✌🏻
Well played sir, well played. Perfect response to my goofy title.
Cool project. I can hear Greta Thunberg screaming from here lol.
It's good for her! Hey buddy.
I don't think you know what the word "renewable" means.
I think you're looking at the video title that I picked from a suggested list of title recommendations. As for renewable, it's a matter of perspective. Vegetation rots everyday and is very slowly turning back into crude. The other thing to think on is that waste oil is a terrible pollutant, one gallon of waste oil can contaminate millions of gallons of ground water and much of it all over the world is disposed of improperly. If you can dispose of it in a clean manner then you are ahead of the game. Clean combustion is probably the cleanest way to dispose of it. When I say clean, I'm talking burning hot enough to have little to no CO in the flue gasses as well as removing enough heat from the burn to make it efficient as well as have no smoke or particulates. I make my living working on industrial burners of all sizes. I know what is clean and efficient and what is not.
@@TheTradesmanChannel I still don't think you know the meaning of the word "renewable".
As stated, title was picked from a generic list of title recommendations. Also, there is no mention of the word renewable in the video. You seem to be looking for an argument on the subject or maybe you just want to show that you are intelligent, not sure which. I'm very open to differing viewpoints and open discussion but I am not open to internet rudeness. If you want a good discussion on the topic, I'm more than willing to have one with you and will listen as well as respect any knowledge you have on the subject matter.
@@TheTradesmanChannel I'm not looking for an argument. I'm simply pointing out that you either don't know the meeting of the word you're using, or you do, but using it as clickbait, or you just don't care whether or not your title has anything to do with the content and just pick one at random. Whatever the case may be, it's not a positive look for you, and it's largely what's wrong with youtube in general.
I'm not a tree hugger, nor some religious whacko who believe in reincarnation or stuff like that. Also, I don't have kids, and I'm never having kids. What becomes of this world after I'm gone is not my biggest concern. And I'll be the last person to tell you what to do. So if you wanna burn oil all day long, I couldn't care less, go right ahead.
That is fair. I've put out well over 700 videos since 2017 on here, mostly timber framing and blacksmith videos.
I ran out of title ideas a long time ago so I let vidIQ pick the titles from time to time. My videos are very honest, there is no covering up of mistakes, if something doesn't work it gets shown. You are probably not familiar with the channel nor me so I can see why you'd feel that way about the title. It is a bit clickbaitish but the content is not.